Microfabrication of U-Shaped Grooves on the Surface of BaO–TiO2–GeO2 Glass by YAG Laser Irradiation and Selective Chemical Etching

A combination technique of Nd:YAG laser (wavelength: 1064 nm) irradiations and chemical etchings was applied to fabricate microsize U-shaped grooves on the surface of CuO-doped BaO–TiO₂–GeO₂ glass, and chemical etching behaviors were examined by using a confocal scanning laser microscope. Continuous-wave Nd:YAG lasers with a power of 0.7–0.8 W were irradiated onto the glass surface and scanned at a speed of 10 μm/s, inducing structural modified lines with refractive index changes. The chemical etching rates for the refractive index changed lines in a nitric acid solution (1 N HNO₃) were larger than those for the base glass (nonirradiated part). The etching profile was changed gradually from W-shaped to U-shaped grooves with increasing etching time. The sharp bending lines with an angle of 150° and the cross-linked lines were also smoothly etched. The U-shaped grooves with a surface covered by nonlinear optical Ba₂TiGe₂O₈ crystals were formed by the crystallization of etched samples. This study proposes that the patterning of microchannels with optical functional surfaces is possible on the glass surface using the present technique.     

Peptide and protein mimetics inhibiting amyloid beta-peptide aggregation

Protein misfolding is related to some fatal diseases including Alzheimer's disease (AD). Amyloid beta-peptide (Abeta) generated from amyloid precursor protein can aggregate into amyloid fibrils, which are known to be a major component of Abeta deposits (senile plaques). The fibril formation of Abeta is typical of a nucleation-dependent process through self-recognition. Moreover, during fibrillization, several metastable intermediates such as soluble oligomers, including Abeta-derived diffusible ligands (ADDLs) and Abeta*56, are produced, which are thought to be the most toxic species to neuronal cells. Therefore, construction of molecules that decrease the Abeta aggregates, including soluble oligomers, protofibrils, and amyloid fibrils, might further our understanding of the mechanism(s) behind fibril formation and enable targeted drug discovery against AD. To this aim, various peptides and peptide derivatives have been constructed using the "Abeta binding element" based on the structural models of Abeta amyloid fibrils and the mechanisms of self-assembly. The central hydrophobic amino acid sequence, LVFF, of Abeta is a key sequence to self-assemble into amyloid fibrils. By combination of this core sequence with a hydrophobic or hydrophilic moiety, such as cholic acid or aminoethoxy ethoxy acetic acid units, respectively, good inhibitors of Abeta aggregation can be designed and synthesized. A peptide, LF, consisting of the sequence Ac-KQKLLLFLEE-NH 2, was designed based on the core sequence of Abeta but with a simplified amino acid sequence. The LF peptide can form amyloid-like fibrils that efficiently coassemble with mature Abeta1-42 fibrils. The LF peptide was also observed to immediately transform the soluble oligomers of Abeta1-42, which are thought to pose toxicity in AD, into amyloid-like fibrils. On the other hand, two Abeta-like beta-strands with a parallel orientation were embedded in green fluorescent protein (GFP), comprised of a beta-barrel structure, to make pseudo-Abeta beta-sheets on its surface. The GFP variant P13H binds to Abeta1-42 and inhibits Abeta1-42 oligomerization effectively in a substoichiometric condition. Thus, molecules capable of binding to Abeta can be designed based on structural similarities with the Abeta molecule. The peptide and protein mimetics based on the structural features of Abeta might lead to the development of drug candidates against AD.     

X-ray photoemission spectroscopy of nitrogen-doped UNCD/a-C:H films prepared by pulsed laser deposition

Nitrogen-doped ultrananocrystalline diamond (UNCD)/hydrogenated amorphous carbon (a-C:H) films were deposited by pulsed laser deposition (PLD). Nitrogen contents in the films were controlled by varying a ratio in the inflow amount between nitrogen and hydrogen gases. The film doped with a nitrogen content of 7.9 at.% possessed n-type conduction with an electrical conductivity of 18 Ω^? 1 cm^? 1 at 300 K. X-ray photoemission spectra, which were measured using synchrotron radiation, were decomposed into four component spectra due to sp², sp³ hybridized carbons, C=N and C–N. A full-width at half-maximum of the sp³ peak was 0.91 eV. This small value is specific to UNCD/a-C:H films. The sp²/(sp³ + sp²) value was enhanced from 32 to 40% with an increase in the nitrogen content from 0 to 7.9 at.%. This increment probably originates from the nitrogen incorporation into an a-C:H matrix and grain boundaries of UNCD crystallites. Since an electrical conductivity of a-C:H does not dramatically enhance for this doping amount according to previous reports, we believe that the electrical conductivity enhancement is predominantly due to the nitrogen incorporation into grain boundaries.     

Study on the factors in creating the IMC-free region: dissimilar metal joining of aluminium alloys to steel by a MIG-braze welding by using the advanced hot-dip aluminized steel sheet

Dissimilar metal joining of aluminium alloys to steel is generally difficult to be in practical use because of a formation of brittle intermetallic Fe–Al compound (IMC) at the interface of the joint. The authors have been researching in order to minimize the thickness of this brittle IMC in order to get excellent joint strength and have found that the formation of this brittle IMC is regionally prevented by using the advanced hot-dip aluminized steel sheet and by adopting suitable joining conditions. In particular, this paper focuses on the mechanism of creating this IMC-free region in the case of MIG-braze welding and the results obtained are as follows. (1) The creation of IMC-free region is initiated as the first process by the dissolution of the τ₅ phase (Fe–Al–Si) in the aluminized layer into the weld metal, and temperatures of more than 886 K for dissolution during MIG-braze welding and the use of filler metal for dilution of Fe and Si in τ₅ phase have significant effects. (2) In the second process, the diffusion between aluminium-alloy weld metal and base steel is restricted by AlN on the surface thin layer of the base steel which existed under 908 K temperature conditions during MIG-braze welding.     

Upgrading and dewatering of raw tropical peat by hydrothermal treatment

In this study, hydrothermal upgrading and dewatering of raw tropical peat derived from Pontianak, West Kalimantan-Indonesia was evaluated at temperatures ranging from 150 to 380 °C, a maximum final pressure of 25.1 MPa and a residence time of 30 min. The moisture content of the raw peat was approximately 90 wt.%. Raw peat was hydrothermally upgraded without the addition of water in the laboratory scale. The yield of the solid products was between 53.0 and 99.7 wt.% and the effective calorific value of hydrothermally dewatered peat was between 17,290 and 29,209 kJ/kg following hydrothermal upgrading. In addition, the oxygen content in the solid product was varied from 38.4 to 15.6 wt.% after upgrading, while the carbon content from 55.2 to 77.8 wt.%. The hydrothermally upgraded peat fuel product also had an equilibrium moisture content of 2.3 wt.% and a maximum equilibrium moisture content of 17.6 wt.%. Upgraded peat is characteristically resistant to moisture adsorption at high humidity, which makes it promising for fuel based combustion. The change in the carbon-functional groups and their properties, as determined by FTIR and ¹³C NMR, are discussed in terms of the hydrothermal upgrading and dewatering process.     

Identification of SYS1 as a Host Factor Required for Shiga Toxin-Mediated Cytotoxicity in Vero Cells

Shiga toxin (STx) or Vero toxin is a virulence factor produced by enterohemorrhagic Escherichia coli. The toxin binds to the glycosphingolipid globotriaosylceramide (Gb3) for its entry, and causes cell death by inhibiting ribosome function. Previously, we performed a loss-of-function screen in HeLa cells using a human CRISPR knockout (KO) library and identified various host genes required for STx-induced cell death. To determine whether this library targeted to the human genome is applicable to non-human primate cells and to identify previously unrecognized factors crucial for STx-induced cell death, we herein performed a similar screen in the African green monkey kidney-derived Vero C1008 subline. Many genes relevant to metabolic enzymes and membrane trafficking were enriched, although the number of enriched genes was less than that obtained in the screening for HeLa cells. Of note, several genes that had not been enriched in the previous screening were enriched: one of these genes was SYS1, which encodes a multi-spanning membrane protein in the Golgi apparatus. In SYS1 KO Vero cells, expression of Gb3 and sphingomyelin was decreased, while that of glucosylceramide and lactosylceramide was increased. In addition, loss of SYS1 inhibited the biosynthesis of protein glycans, deformed the Golgi apparatus, and perturbed the localization of trans-Golgi network protein (TGN) 46. These results indicate that the human CRISPR KO library is applicable to Vero cell lines, and SYS1 has a widespread effect on glycan biosynthesis via regulation of intra-Golgi and endosome–TGN retrograde transports.     

Alzheimer’s Disease Animal Models: Elucidation of Biomarkers and Therapeutic Approaches for Cognitive Impairment

Alzheimer’s disease (AD) is an age-related and progressive neurodegenerative disorder. It is widely accepted that AD is mainly caused by the accumulation of extracellular amyloid β (Aβ) and intracellular neurofibrillary tau tangles. Aβ begins to accumulate years before the onset of cognitive impairment, suggesting that the benefit of currently available interventions would be greater if they were initiated in the early phases of AD. To understand the mechanisms of AD pathogenesis, various transgenic mouse models with an accelerated accumulation of Aβ and tau tangles have been developed. However, none of these models exhibit all pathologies present in human AD. To overcome these undesirable phenotypes, APP knock-in mice, which were presented with touchscreen-based tasks, were developed to better evaluate the efficacy of candidate therapeutics in mouse models of early-stage AD. This review assesses several AD mouse models from the aspect of biomarkers and cognitive impairment and discusses their potential as tools to provide novel AD therapeutic approaches.     

A three-dimensional,clothed human thermal model

We have developed a three-dimensional clothed human thermal model for predicting physiological responses to temperature and humidity within clothing by considering the thermal properties of fabrics, clothing ensembles, and their designs. The model is a coupled simulation system of a human thermal model and a clothing thermal model. The model performance was investigated by comparing its predictions with experimental data. The following results were obtained. (1) The model predictions of skin temperature distributions and the micro-climate within clothing basically agreed with experimental data. (2) The skin temperatures of clothed body parts were higher than the corresponding body parts in the nude condition, and the skin temperatures of the hand and foot were higher than those in the nude condition, both in the model predictions and in the experimental data. (3) The model prediction of total moisture transfer was almost the same as obtained from the experimental data. 1998 Scripta Technica, Heat Trans Jpn Res, 26(8): 554–566, 1997     

利用生物化学手段的香料化合物的生产

大部分的香料化合物是生物体内酶的产物.另一方面,自古以来人类就已利用微生物体内酶的生物化学反应用于发酵.在香料行业运用生物的这种作用,也就是生物化学的手段,尝试香料化合物的生成研究和生产研究.文章例举了由油脂发酵生产甲酮类、利用微生物氧化反应生产γ-十二内酯以及利用微生物还原反应生产δ-癸内酯的制造方法.