Robust control via concave minimization local and global algorithms

This paper is concerned with the robust control problem of linear fractional representation (LFT) uncertain systems depending on a time-varying parameter uncertainty. Our main result exploits a linear matrix inequality (LMI) characterization involving scalings and Lyapunov variables subject to an additional essentially nonconvex algebraic constraint. The nonconvexity enters the problem in the form of a rank deficiency condition or matrix inverse relation on the scalings only. It is shown that such problems, but also more generally rank inequalities and bilinear constraints, can be formulated as the minimization of a concave functional subject to LMI constraints. First of all, a local Frank and Wolfe (1956) feasible direction algorithm is introduced in this context to tackle this hard optimization problem. Exploiting the attractive concavity structure of the problem, several efficient global concave programming methods are then introduced and combined with the local feasible direction method to secure and certify global optimality of the solutions. Computational experiments indicate the viability of our algorithms, and in the worst case, they require the solution of a few LMI programs     

Efficient Multimedia Distribution in Source Constraint Networks

In recent years, the number of peer-to-peer (P2P) applications has increased significantly. One important problem in many P2P applications is how to efficiently disseminate data from a single source to multiple receivers on the Internet. A successful model used for analyzing this problem is a graph consisting of nodes and edges, with a capacity assigned to each edge. In some situations however, it is inconvenient to use this model. To that end, we propose to study the problem of efficient data dissemination in a source constraint network. A source constraint network is modeled as a graph in which, the capacity is associated with a node, rather than an edge. The contributions of this paper include (a) a quantitative data dissemination in any source constraint network, (b) a set of topologies suitable for data dissemination in P2P networks, and (c) an architecture and implementation of a P2P system based on the proposed optimal topologies. We will present the experimental results of our P2P system deployed on PlanetLab nodes demonstrating that our approach achieves near optimal throughput while providing scalability, low delay and bandwidth fairness among peers.     

A spatially constrained fuzzy hyper-prototype clustering algorithm

We present in this paper a fuzzy clustering algorithm which can handle spatially constraint problems often encountered in pattern recognition. The proposed method is based on the notions of hyperplanes, the fuzzy c-means, and spatial constraints. By adding a spatial regularizer into the fuzzy hyperplane-based objective function, the proposed method can take into account additionally important information of inherently spatial data. Experimental results have demonstrated that the proposed algorithm achieves superior results to some other popular fuzzy clustering models, and has potential for cluster analysis in spatial domain.     

Supervised restoration of degraded medical images using multiple-point geostatistics

Reducing noise in medical images has been an important issue of research and development for medical diagnosis, patient treatment, and validation of biomedical hypotheses. Noise inherently exists in medical and biological images due to the acquisition and transmission in any imaging devices. Being different from image enhancement, the purpose of image restoration is the process of removing noise from a degraded image in order to recover as much as possible its original version. This paper presents a statistically supervised approach for medical image restoration using the concept of multiple-point geostatistics. Experimental results have shown the effectiveness of the proposed technique which has potential as a new methodology for medical and biological image processing.     

Unsupervised active contours driven by density distance and local fitting energy with applications to medical image segmentation

This study presents an efficient variational region-based active contour model for segmenting images without priori knowledge about the object or background. In order to handle intensity inhomogeneities and noise, we propose to integrate into the region-based local intensity model a global density distance inspired by the Bhattacharyya flow. The local term based on local information of segmented image allows the model to deal with bias field artifact, which arises in data acquisition processes. The global term, which is based on the density distance between the probability distribution functions of image intensity inside and outside the active contour, provides information for accurate segmentation, keeps the curve from spilling, and addresses noise in the image. Intensive 2D and 3D experiments on many imaging modalities of medical fields such as computed tomography, magnetic resonance imaging, and ultrasound images demonstrate the effectiveness of the model when dealing with images with blurred object boundary, intensity inhomogeneities, and noise.     

Experimental and numerical investigation of the debonding interface between an old concrete and an overlay

The paper focuses on debonding propagation along an interface, notably on the major influence of the interlocking between the two faces of the debonding interface. The aim of the study is to obtain the data necessary for relevant and efficient debonding modelling. The work associates experiment and simulation with the purpose of quantifying the interlocking along the interface. The overlay material investigated was a fibre reinforced mortar (FRM). Direct tension tests of notched FRM specimens were firstly conducted to obtain the tensile strength and the residual normal stress—crack width relationship. Its Young's modulus was determined from compression tests. The substrate-overlay interface was investigated by direct tension tests and flexure tests performed on composite substrate-overlay specimens. The direct tension tests provided the interface tensile strength and the relationship between debonding-opening and residual normal tensile stress. Three point flexural static tests informed on the structural behaviour of the interface. The debonding interface propagation was monitored using a video-microscope with a maximum enlargement of ×175. Using the identified and quantified parameters, modelling of the above mentioned static tests was carried out by the finite elements method using CAST3M code developed in France by CEA (Centre for Atomic Energy). The comparison of modelling and experiment results shows a good coherence and proves the important role of interlocking on the debonding mechanism.     

Design and optimization of electrostatic fluid accelerators

Electrostatic air propulsion is a promising technology with such potential applications as energy-efficient ventilation, air sterilization, cooling of electronics, and dehumidification. The challenges of existing designs include the need to increase air speed, backpressure, energy efficiency, and heat exchange capability. The ultimate goal of this direction of research is to create multi-channel energy efficient ionic pumps. In the described project, a single cell analysis is conducted in this study as a building block of future designs. This paper presents the numerical simulation and experimental results of electrostatic fluid accelerators. This study was conducted for the purpose of optimizing device characteristics through the control of the electric field distribution. Simulations were performed for multiple collector electrode voltage distributions. A method to quantify the change in pump performance between different voltage distributions is presented. The influence of space charge on pump performance is also discussed. A significant improvement of air velocity generated by optimized electrostatic fluid accelerators has been achieved using the proposed approach.     

化选矿硫酸浸出稀土工艺研究

化选矿经硫酸浸出,在合适的酸度、温度、反应时间条件下,稀土浸出率为90%。     

Automatic ARIMA time series modeling for adaptive I/O prefetching

Inadequate I/O performance remains a major challenge in using high-end computing systems effectively. To address this problem, we present TsModeler, an automatic time series modeling and prediction framework for adaptive I/O prefetching that uses ARIMA time series models to predict the temporal patterns of I/O requests. These online pattern analysis techniques and cutoff indicators for autocorrelation patterns enable multistep online predictions suitable for multiblock prefetching. This work also combines time series predictions with spatial Markov model predictions to determine when, what, and how many blocks to prefetch. Experimental results show reductions in execution time compared to the standard Linux file system across various hardware configurations.     

High-performance lift augmentation dynamic seals for turbine bearing compartments

Conventional bearing shaft seal systems used in gas turbine engines are often limited to a sliding velocity of about 100 m/s, differential pressure of 3 bar, gas temperature of 300°C and a seal life less than 8000 h. Advanced engines will require bearing shaft seal systems to operate up to sliding velocity of 200 m/s, differential pressure of 6 bar, gas temperature of 500°C and seal life in excess of 30?000 hours. For seals operating in these advanced conditions, a design with no rubbing contact will be required to achieve long life and reliability. A good validated approach is the use of a gas lift augmentation seal. The design objective for a seal of this type is to have the faces of the seal seek an equilibrium position to avoid any contact. The gap must be small enough to ensure a minimal air leakage, but it must be large enough to limit power dissipation, due to shear in the gas film, and face deformation by shaft displacement, misalignment and vibration. Dynamic seals for a bearing compartment have the following main functions: provide static and dynamic sealing in order to prevent oil leakage from the bearing oil compartment to the air compartment and consequently no oil smell pollution by the use of bleed air; control air leakage to the bearing oil compartment in order to improve performance of the engine and to reduce oil consumption; reduce volume of the oil tank and lubrication system and hence provide weight reduction; to operate in extreme conditions of temperature and with normal and reverse pressure; and reduce the mean time between overhaul (MTBO) and have a very long life. Techspace Aero and Burgmann have carried out design, development and testing of lift augmentation carbon seals and demonstrated that high life and performance levels of these seals are possible in a gas turbine engine environment.