Investigation of the geothermal anomaly of Travale (Tuscany) by telluric, magnetotelluric and geomagnetic deep sounding measurements

As part of the European Community research programme telluric, magnetotelluric and geomagnetic deep sounding measurements were undertaken at 40 sites within the geothermal area of Travale. In the period range of 6–10,000 s the telluric field inside the Travale graben is strongly polarized and directed, independent of the period, about parallel to the graben strike. The lateral variation of the telluric field amplitude is determined mainly by the distribution of the rocks (e.g. the central part of the geothermal anomaly inside the graben is correlated with a horst structure of resistive rocks) and an influence of the geothermal anomaly on the telluric field distribution cannot be observed. The apparent resistivity, as well as the phase curves, are rather similar at all sites within the graben, exhibiting 4–40 ohm · m for periods of 10 s and 50–500 ohm · m for periods of 10,000 s in E-polarization. In the period range of 10–100 s the E- and B-polarization of magnetotelluric measurements can be interpreted by the 2-D effect of the Travale graben, while with increasing period the induced current system becomes more and more 3-D below all sites. This limits the determination of the sedimentary cover thickness (max. 2500 m) by 1-D and 2-D model calculations to periods of less than 100 s.     

A dynamic linear programming approach to market allocation of renewable resources in the italian energy system: The case of solar thermal and biogas technologies

In Italy solar thermal energy and energy from biogas are two possible means of reducing dependence on energy imports. Using a multiperiod LP model (MARKAL) the authors assessed the likely potential of both technologies under various circumstances. The study covered the period 1980–2005, in five segments of five years. It focused only on the subsystem of the energy end-uses which can be substituted for by solar thermal and biogas technologies. The overall non-renewable sources which can be saved in 20 years by these technologies total 450 PJ (1 PJ = 10^{1 5} J) if the fuel prices rise at 0 per cent average annual, 1450 PJ if the fuel prices rise at 4.2 per cent average annual, 1860 PJ if the fuel prices rise at 7.2 per cent average annual and 3780 PJ if the fuel prices rise at 15 per cent average annual. However the most competitive technologies appear to be solar water heaters used mainly in the private and commercial sectors and biogas systems used mainly in the agricultural sector. The study was carried out by APRE under ENEA (formerly CNEN) contract and was intended to serve as an analytical basis for establishing an overall development and demonstration strategy for end-use renewable technologies in Italy.     

Compensation of the Piezo-Hall Effect in Integrated Hall Sensors on (100)-Si

Silicon Hall sensors are known to suffer from a long-term drift in the magnetic sensitivity between 1% and 4%, depending on the degree of moisture in the mold compound of the package. This drift is mainly caused by changes of mechanical stress exerted by the plastic package onto the die. We present a system, which continuously measures the relevant stress components, estimates the sensitivity drift, and corrects for it digitally. An individual precalibration versus temperature is necessary to achieve the required level of accuracy. Results from laboratory characterization with pressure cells and lifetime drift during qualification runs show that this system can keep the drift of magnetic sensitivity well below 1%.     

Online monitoring by dynamically refining imprecise models

Model-based monitoring determines faults in a supervised system by comparing the available system's measurements with a priori information represented by the system's mathematical model. Especially in technical environments, a monitoring system must be able to reason with incomplete knowledge about the supervised system, to process noisy and erroneous observations and to react within a limited time. We present MOSES, a model-based monitoring system which is based on imprecise models where the structure is known and the parameters may be imprecisely specified by numerical intervals. As a consequence, only bounds on the trajectories can be derived with imprecise models. These bounds are computed using traditional numerical integration techniques starting from individual points on the external surface of the model's uncertainty space. When new measurements from the supervised system become available, MOSES checks the consistency of this new information with the model's prediction and refutes inconsistent parts from the uncertainty space of the model. A fault in the supervised system is detected when the complete model's uncertainty space has been refuted. MOSES bridges and extends methodologies from the FDI and DX communities by refining the model's uncertainty space conservatively through refutation, by applying standard numerical techniques for deriving the trajectories of imprecise models and by exploiting the measurements as soon as possible for online monitoring. The performance of MOSES is evaluated based on examples and by online monitoring a complex heating system.     

Spannungsintensitätsfaktoren für vollständig umlaufende Oberflächenumfangsrisse in Rohren bei Thermoschockbelastung

Stress Intensity Factors for Complete Circumferential Surface Cracks in Thermally Shocked Pipes In the case of an emergency cooling of a reactor thermal stresses are generated in the pipes of the primary loop, which may be described conservatively as a thermal shock problem. In this paper complete interior circumferential surface cracks loaded by these thermal stresses are considered. By means of the weight function method stress intensity factors were calculated for this loading case.     

Origin of the threshold voltage instability in SiO/sub 2//HfO/sub 2/ dual layer gate dielectrics

The magnitude of the V/sub T/ instability in conventional MOSFETs and MOS capacitors with SiO/sub 2//HfO/sub 2/ dual-layer gate dielectrics is shown to depend strongly on the details of the measurement sequence used. By applying time-resolved measurements (capacitance-time traces and charge-pumping measurements), it is demonstrated that this behavior is caused by the fast charging and discharging of preexisting defects near the SiO/sub 2//HfO/sub 2/ interface and in the bulk of the HfO/sub 2/ layer. Based on these results, a simple defect model is proposed that can explain the complex behavior of the V/sub T/ instability in terms of structural defects as follows. 1) A defect band in the HfO/sub 2/ layer is located in energy above the Si conduction band edge. 2) The defect band shifts rapidly in energy with respect to the Fermi level in the Si substrate as the gate bias is varied. 3) The rapid energy shifts allows for efficient charging and discharging of the defects near the SiO/sub 2//HfO/sub 2/ interface by tunneling.     

Mesa and planar SiGe-HBTs on MBE-wafers

SiGe-HBTs have the potential for outstanding analog and digital or mixed-signal high frequency circuits widely based on standard Si technology. Here we review on MBE grown transistors and circuits. Processes and results of a research-like SiGe HBT and two possible production relevant HBT versions are presented. The high frequency results with f_max and f_T up to 120 GHz and a minimum noise figure of 0.9 dB at 10 GHz demonstrate the advantage of using MBE samples with steep and high base doping and high germanium contents. A comparison to the concept of reported low doped, low germanium and triangular profiled SiGe base layers, realized by UHV-CVD, is given. In addition, some circuit demonstrators of SiGe-ICs will be presented.     

Topical use of aprotinin in open heart operations

Among various pharmacological agents used to reduce bleeding after open-heart operations, high-dose aprotinin therapy seems most promising. However, its long-term effects are still obscure; there is almost always possibility of bypass graft occlusions produced by the hypercoagulable state induced by aprotinin in coronary bypass operations. Topical application of aprotinin into the pericardial cavity could prevent the adverse effects. Fifty patients were prospectively studied to evaluate the effects of topical aprotinin. One million KIU of aprotinin was poured into the pericardial cavity before closure of the sternotomy in group 1 (n = 25). Patients in group 2 (n = 25) served as controls. Total postoperative bleeding was significantly reduced in group 1 when compared with that of group 2 (722.7 +/- 230.8 versus 1,282.6 +/- 225.7 mL; p < 0.01). The use of banked donor blood products was significantly less in group 1 than in group 2 (0.33 +/- 0.67 versus 1.36 +/- 0.86 units; p < 0.01). These results show that topical use of aprotinin reduces post-operative blood loss and need for transfusion. It seems promising and warrants further studies to be done.     

Growth structure investigation of MgF2 and NdF3 films grown by molecular beam deposition on CaF2(111) substrates

The growth structure of MgF₂ and NdF₃ films grown on polished CaF₂(111) substrates deposited by molecular beam deposition has been investigated using transmission electron microscopy (TEM) of microfractographical and surface replications as well as cross-sectional TEM, atomic force microscopy, packing density, and absorption measurements. It has been shown that by taking advantage of ultrahigh vacuum environments and a special stratification property of MgF₂ and NdF₃ films, the preparation of nanocrystalline films of high packing density and low optical absorption is possible at a substrate temperature of 425 K.