Diffusion regimes at nanoelectrode ensembles in different ionic liquids

The electrochemical and diffusion behaviour of different redox probes in different ionic liquids is studied at gold nanoelectrode ensembles (NEEs) in comparison with millimetre sized gold (Au-macro) and glassy carbon (GC) disk electrodes. The redox probes are neutral ferrocene (Fc), the ferrocenylmethyltrimetylammonium cation (FA⁺) and the ferrocenylmonocarboxylate anion (FcCOO⁻). The ILs are the dicyanamide, [N(CN)₂] or bis(trifluoromethylsulfonyl)amide), [N(Tf)₂] salts of the following cations: 1-butyl-3-methylimidazolium, [BMIm], 1-butyl-3-methylpyrrolidonium, [BMPy], or tris(n-hexyl)tetradecylphosphonium [P_14,666]. These ILs are characterized by different viscosities, ranging from 32 to 277 cP. The cyclic voltammetric behaviour of the redox probes is reversible and diffusion controlled at GC electrodes. Diffusion coefficients (D) calculated by the Randles-Sevcik equation scales inversely with the IL viscosity, ranging from 2 × 10⁻⁸ to 3 × 10⁻⁷ cm² s⁻¹. Ionic solutes, namely FA⁺ and FcCOO⁻, present slightly lower D values than neutral Fc. At the Au-macro the electrochemical behaviour of the redox probes is diffusion controlled in the ILs containing the [N(Tf)₂] anion, while it involves relevant adsorption processes in the [N(CN)₂] containing electrolyte. For this reason the diffusion at gold NEEs is studied only in the former ILs.The CVs of the redox probes at the NEEs are peak shaped at low scan rate (v), while they are sigmoidally shaped at high v, but with some shift between forward and backward patterns. This is indicative of the occurrence of a total overlap (TO) diffusion condition when v is low which becomes a mixed diffusion layers (MDL) regime, with only a partial overlapping of individual diffusion layers, at high v values. In the most viscous IL, namely [P_14,666] [N(Tf)₂], at v higher than 0.8 V s⁻¹, a plateau current independent on the scan rate is achieved, indicating the tendency to reach the pure radial regime in this IL. The v values at which the transition between TO and MDL is observed scales directly with D and inversely with the IL viscosity. This behaviour is interpreted on the basis of the dependence of individual diffusion layers at each nanoelectrode on redox probe/IL interaction which fits with existing theoretical models very recently developed for nanoelectrode arrays.     

Parametric thermo-hydraulic analysis of the TF system of JT-60SA during fast discharge

The evolution of the conductor temperature and of the helium pressure of the central pancake of the TF superconducting magnet of the JT-60SA tokamak in a quench scenario are here discussed. The quench is triggered by a heat disturbance applied at the end of burning and followed by a fast safety discharge. A parametric study aimed at assessing the robustness of the calculation is also addressed with special regard to the voltage threshold, used to define the occurrence of the quench, and to the time delay, that cover all the possible delays in the fast discharge after quench detection. Finally, due to sensitivity analyses the influences of different parameters were assessed: the material properties of the strands (RRR, copper fraction), the magnitude and the spatial length of the triggering disturbance and the magnetic field distribution. The numerical evaluations were performed in the framework of the Broader Approach Agreement in collaboration with CEA, ENEA and the JT-60SA European Home Team using the 1D code Gandalf [1].     

Gamma irradiation of PolyEthyleneTerephthalate and PolyEthyleneNaphthalate

The effect of gamma irradiation in air is investigated in two thermoplastic polyesters (PET and PEN), in order to evaluate the influence of aromatic density and the role of oxygen on radiation resistance. EPR measurements were carried out to detect radical stability against oxygen permeation and to provide radical characterization. Viscometric data reveal a different behaviour between films and thick samples. Positron annihilation spectra show a decrease of ortho-positronium intensity, which is more marked in film samples. ortho-positronium lifetime does not depend on the radiation dose.     

The electrical discharge as a source of a mechanical energy

Experimental study of the electrical discharge at the surface of an insulating material is presented. The discharge is created at the surface of an insulating material, we used two geometrical forms which are a flat plate and a roll. We used many types of insulating materials. For each case we show the curves of characteristics current–voltage as well as the current density–electrical field evolution and we determine the domain of the discharge stability. The discharge creates an ionic wind which ensures its dynamic effect. In fact the discharge creates a mechanical energy which can be used for many purposes and especially in aerodynamics for airflow control. We present measurements of ionic wind velocity which prove its efficiency for the airflow control. Besides we show visualisations of the discharge and the ionic wind.     

Stubborn Sets for Real-Time Petri Nets

The stubborn-set method attempts to reduce the number of states that must be explicitly enumerated during reachability analysis of a concurrent system, while preserving crucial concurrency properties in the reduced state space. Here we extend the method to the analysis of certain timed models. We also prove that timing properties of interest, such as minimum and maximum delays between events, are preserved in the reduced model. Finally, we report on some experimental results that we have obtained with our extension. These results show that real-time stubborn sets can often provide significant reductions in state space size.     

Analysis and design consideration of mean temperature differential Stirling engine for solar application

This article presents a technical innovation, study of solar power system based on the Stirling dish (SD) technology and design considerations to be taken in designing of a mean temperature differential Stirling engine for solar application. The target power source will be solar dish/Stirling with average concentration ratio, which will supply a constant source temperature of 320 °C. Hence, the system design is based on a temperature difference of 300 °C, assuming that the sink is kept at 20 °C. During the preliminary design stage, the critical parameters of the engine design are determined according to the dynamic model with losses energy and pressure drop in heat exchangers was used during the design optimisation stage in order to establish a complete analytical model for the engine. The heat exchangers are designed to be of high effectiveness and low pressure-drop. Upon optimisation, for given value of difference temperature, operating frequency and dead volume there is a definite optimal value of swept volume at which the power is a maximum. The optimal swept volume of 75 cm³ for operating frequency 75 Hz with the power is 250 W and the dead volume is of 370 cm³.