Implementation and optimization of the HySyLab DMFC single cell test station

In this study, the construction and optimization of a low cost home-assembled DMFC single cell test station is described. The station was built using two flow control systems, for gas (air/oxygen) and liquid (methanol), a temperature controller, an electronic load, a milliohm-meter for resistance measurements and a computerized data acquisition system. The experiments were carried out on a 6.25 cm² single cell, built using two graphite plates with triple serpentine channel geometry for both anodic and cathodic flow fields. The cell was equipped with an MEA composed of Nafion 117 as electrolyte, Pt/C based catalyst as cathode and PtRu (1:1)/C as anode. In order to develop a HySyLab internal standard procedure, MEA activation was carefully studied. The activated MEA was used to determine the optimum values of cell operating parameters, such as oxidant flow, methanol flow and temperature.     

Teaching children about bicycle safety: An evaluation of the New Jersey Bike School program

There are multiple health and environmental benefits associated with increasing bicycling among children. However, the use of bicycles is also associated with severe injuries and fatalities. In order to reduce bicycle crashes, a bicycling education program was implemented in selected New Jersey schools and summer camps as part of the New Jersey Safe Routes to School Program. Using a convenience sample of participants to the program, an opportunistic study was designed to evaluate the effectiveness of two bicycle education programs, the first a more-structured program delivered in a school setting, with no on-road component, and the other a less structured program delivered in a summer camp setting that included an on-road component. Tests administered before and after training were designed to assess knowledge acquired during the training. Questions assessed children's existing knowledge of helmet use and other equipment, bicycle safety, as well as their ability to discriminate hazards and understand rules of the road. Participating children (n = 699) also completed a travel survey that assessed their bicycling behavior and their perception of safety issues. Response to individual questions, overall pre- and post-training test scores, and changes in test scores were compared using comparison of proportion, t-tests, and ordinary least-squares (OLS) regression. Improvements between the pre-training and post-training test are apparent from the frequency distribution of test results and from t-tests. Both summer camps and school-based programs recorded similar improvements in test results. Children who bicycled with their parents scored higher on the pre-training test but did not improve as much on the post-training test. Without evaluating long-term changes in behavior, it is difficult to ascertain how successful the program is on eventual behavioral and safety outcomes.     

Parametric thermo-hydraulic analysis of the TF system of JT-60SA during fast discharge

The evolution of the conductor temperature and of the helium pressure of the central pancake of the TF superconducting magnet of the JT-60SA tokamak in a quench scenario are here discussed. The quench is triggered by a heat disturbance applied at the end of burning and followed by a fast safety discharge. A parametric study aimed at assessing the robustness of the calculation is also addressed with special regard to the voltage threshold, used to define the occurrence of the quench, and to the time delay, that cover all the possible delays in the fast discharge after quench detection. Finally, due to sensitivity analyses the influences of different parameters were assessed: the material properties of the strands (RRR, copper fraction), the magnitude and the spatial length of the triggering disturbance and the magnetic field distribution. The numerical evaluations were performed in the framework of the Broader Approach Agreement in collaboration with CEA, ENEA and the JT-60SA European Home Team using the 1D code Gandalf [1].     

Biological and technical variables affecting immunoassay recovery of cytokines from human serum and simulated vaginal fluid: a multicenter study

The increase of proinflammatory cytokines in vaginal secretions may serve as a surrogate marker of unwanted inflammatory reaction to microbicide products topically applied for the prevention of sexually transmitted diseases, including HIV-1. Interleukin (IL)-1beta and IL-6 have been proposed as indicators of inflammation and increased risk of HIV-1 transmission; however, the lack of information regarding detection platforms optimal for vaginal fluids and interlaboratory variation limit their use for microbicide evaluation and other clinical applications. This study examines fluid matrix variants relevant to vaginal sampling techniques and proposes a model for interlaboratory comparisons across current cytokine detection technologies. IL-1beta and IL-6 standards were measured by 12 laboratories in four countries, using 14 immunoassays and four detection platforms based on absorbance, chemiluminescence, electrochemiluminescence, and fluorescence. International reference preparations of cytokines with defined biological activity were spiked into (1) a defined medium simulating the composition of human vaginal fluid at pH 4.5 and 7.2, (2) physiologic salt solutions (phosphate-buffered saline and saline) commonly used for vaginal lavage sampling in clinical studies of cytokines, and (3) human blood serum. Assays were assessed for reproducibility, linearity, accuracy, and significantly detectable fold difference in cytokine level. Factors with significant impact on cytokine recovery were determined by Kruskal-Wallis analysis of variance with Dunn's multiple comparison test and multiple regression models. All assays showed acceptable intra-assay reproducibility; however, most were associated with significant interlaboratory variation. The smallest reliably detectable cytokine differences ( P < 0.05) derived from pooled interlaboratory data varied from 1.5- to 26-fold depending on assay, cytokine, and matrix type. IL-6 but not IL-1beta determinations were lower in both saline and phosphate-buffered saline as compared to vaginal fluid matrix, with no significant effect of pH. The (electro)chemiluminescence-based assays were most discriminative and consistently detected <2-fold differences within each matrix type. The Luminex-based assays were less discriminative with lower reproducibility between laboratories. These results suggest the need for uniform vaginal sampling techniques and a better understanding of immunoassay platform differences and cross-validation before the biological significance of cytokine variations can be validated in clinical trials. This investigation provides the first standardized analytic approach for assessing differences in mucosal cytokine levels and may improve strategies for monitoring immune responses at the vaginal mucosal interface.     

Chemical etching in processing cortical bone specimens for scanning electron microscopy

Transverse and longitudinal sectioning of undecalcified cortical bone is a commonly employed technique for investigating the lamellar structure of the osteons. Since a flat surface is required, the specimen has to be grinded and then polished. Whereas the smear of debris and inorganic/organic deposits left by these treatments cannot be removed by ultrasonication alone, a chemical treatment of the specimen surface with either a basic or an acid etching solution is currently employed. A further effect of the latter can be the enhancement of the lamellar bone pattern. The kind of etching solution, its pH, the concentration of etchants, and the contact time significantly affect the sectioned surface when it is observed with scanning electron microscopy (SEM). The etching procedures can severely influence the obtained images. Homogeneous cortical bone specimens were sampled from the first metatarsal of two fresh human subjects. One or two cut surfaces were exposed to different acid and basic solutions in bonded conditions. Considering the type of chemical agents, the solution pH, and the exposure time of the specimens, the effects of several etching media have been investigated and compared. Strong etching, either acid or basic produced surface decalcification and severe damage of the collagen matrix, compromising any morphological or morphometric analysis. Weak acid etching (for example citric and acetic acid), even though causing distinctive alteration of the sample, enhanced the visibility of the lamellar pattern, while the polyphosphate treatment of the surface decalcified a thin layer matrix, ensuring a good visibility of fibrils and avoiding rough distortions. Microsc. Res. Tech. 77:653–660, 2014. © 2014 Wiley Periodicals, Inc.     

An integrated electrochromic nanoplasmonic optical switch

We demonstrate an electrochemically driven optical switch based on absorption modulation of surface plasmon polaritons (SPPs) propagating in a metallic nanoslit waveguide containing nanocrystals of electrochromic Prussian Blue dye. Optical transmission modulation of ～96% is achieved by electrochemically switching the dye between its oxidized and reduced states using voltages below 1 V. High spatial overlap and long interaction length between the SPP and the active material are achieved by preferential growth of PB nanocrystals on the nanoslit sidewalls. The resulting orthogonalization between the directions of light propagation and that of charge transport from the electrolyte to ultrathin active material inside the nanoslit waveguide offers significant promise for the realization of electrochromic devices with record switching speeds.     

Flexible,Low-loss Waveguide Designs for Efficient Coupling to Quantum Cascade Lasers in the Far-infrared

We coupled linearly polarized and azimuthally polarized Terahertz quantum cascade lasers (QCLs) to the low-loss optical modes of hollow core waveguides having a sequence of different metallic or dielectric inner coatings. The latter waveguides have been specifically designed to force the propagation of a dominant optical mode once the thickness (d) of the inner dielectric coating is properly chosen. Our results demonstrate that both the TE01 and the TE11 modes can be easily converted to a hybrid one when d > 6 μm allowing the propagation of THz QCL beams with transmission losses as low as 1.5 dB/m, bending losses < 1.1 dB and reasonably high coupling efficiencies (87%).     

Peak oil: The four stages of a new idea

The present paper reviews the reactions and the path of acceptance of the theory known as “peak oil”. The theory was proposed for the first time by M.K. Hubbert in the 1950s as a way to describe the production pattern of crude oil. According to Hubbert, the production curve is “bell shaped” and approximately symmetric. Hubbert's theory was verified with good approximation for the case of oil production in the United States that peaked in 1971, and is now being applied to the worldwide oil production. It is generally believed that the global peak of oil production (“peak oil”) will take place during the first decade of the 21st century, and some analysts believe that it has already occurred in 2005 or 2006. The theory and its consequences have unpleasant social and economical implications. The present paper is not aimed at assessing the peak date but offers a discussion on the factors that affect the acceptance and the diffusion of the concept of “peak oil” with experts and with the general public. The discussion is based on a subdivision of “four stages of acceptance”, loosely patterned after a sentence by Thomas Huxley.     

Low Risk Synthesis of Energetic Poly(3‐Azidomethyl‐3‐Methyl Oxetane) from Tosylated Precursors

Azidated oxetanic polymers such as poly(3‐azidomethyl‐3‐methyl oxetane), are under investigation as “energetic” binder to be used as an alternative to polybutadiene in solid rocket propellants. The classic synthetic route for the production of the polymer is through an azidated monomer where the N₃⁻ functionality has been previously introduced by nucleophilic displacement of a suitable, usually a halogen, leaving group. However, this could involve critical steps with manipulation of a highly unstable liquid monomer. Here it is shown that the azidation can be performed as the final step of the preparation by substitution of the tosyl group in a preformed polymer. The procedure assures good yield and purity of the product and satisfactory rate of reaction, being the energetic functionality always kept in a safe form, which shows low shock and friction sensitivity. Poly(3‐azidomethyl‐3‐methyl oxetane) was prepared by azidation of poly(3‐tosyloxymethyl‐3‐methyl oxetane) in dimethylsulfoxide, testing several operating conditions. Moreover, hypothesizing a second order kinetics, the rate constant and the activation energy for the azidation step have been estimated.     

In-House Validation and Comparison of Two Wheat (<Emphasis Type="Italic">Triticum aestivum</Emphasis>) Taxon-Specific Real-Time PCR Methods for GMO Quantification Supported by Droplet Digital PCR

Common wheat is one of the most important staple food crops worldwide. However, unlike other important staple crops such as maize or soybean, genetically modified (GM) wheat is not yet present in the global food market. Nonetheless, in the recent past, the adventitious presence of GM glyphosate-tolerant volunteers was reported in open wheat fields in the USA. The European Union Reference Laboratory for GM Food and Feed (EURL-GMFF) was therefore called to develop a strategy to detect such unauthorised GM wheat in wheat samples by using both taxon-specific and screening tests. Two candidate common wheat taxon-specific real-time PCR methods were suggested, one targeting ssII-D gene coding for starch synthase and the other targeting waxy-D1 gene, coding for granule-bound starch synthase. In the present study, the two above-mentioned real-time PCR taxon-specific methods were in-house verified and compared, proposing droplet digital PCR (ddPCR) as a new tool for supporting the application of the European Network of GMO Laboratories (ENGL) established method performance criteria. Preliminary performance data of waxy-D1 and ssII-D methods in ddPCR format are shown too to give a contribution to the bridging process from the consolidated to the emerging quantitative PCR methodology.