Improved methods for evaluating the molar mass distributions of cellulose in kraft pulp

Multi‐angle laser light scattering (MALLS) was used to characterize birch kraft pulps with respect to their absolute molecular mass distributions (MMDs). The pulps were dissolved in lithium chloride/N,N‐dimethylacetamide and separated by size exclusion chromatography (SEC). The weight‐average and number‐average molecular masses of the cellulose fractions of the pulps obtained from the absolute MALLS measurements were compared with the molar masses obtained by direct‐standard‐calibration relative pullulan standards. Discrepancies between the two detection methods were found, and two ways of correlating the relative pullulan molar masses to the absolute molar masses were examined. In the first method, the correlation was made over a large range of molecular masses. The second method correlated the molecular masses of the standards to the molecular masses of samples by the calculation of fictitious, cellulose‐equivalent molar masses of the standards. With the preferred second method, a more correct MMD of kraft pulp samples could, therefore, be obtained from an SEC system calibrated with narrow standards. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 1170–1179, 2003     

Near Wall Studies of Pulp Suspension Flow Using LDA

A detailed study of the flow behaviour in the near wall region of pulp suspensions up to 4.7% have been performed using Laser Doppler Anemometry (LDA) in pipe flow. Axial mean velocity profiles show a distinct plug flow and an increase of the plug region as the flow rate decreases and fibre concentration increases. An attempt is made to relate the LDA data‐rate to fibre concentration, which indicates a dilution region at 1‐2 mm from the wall that is larger than the annulus region. The dilution region increases with increasing flow rate, decreasing concentration and when using longer pulp fibres.     

Influence of the preparation conditions on the properties of gold catalysts for the oxidation of glucose

In this work, two deposition–precipitation methods for the preparation of gold catalysts for glucose oxidation were investigated. Thus far, gold colloids immobilized on carbon have been used for catalytic glucose oxidation, but the long-term stability of these systems was not sufficient. To improve the long-term stability we used the deposition–precipitation methods using NaOH (DP NaOH) or urea (DP urea) as precipitation agents as they were described by Haruta and Dekkers, respectively, using alumina as a support material. With these methods, it was possible to prepare highly active and selective catalysts which showed an excellent long-term stability. DP urea was found to be the preferred method, because in contrast to DP NaOH, no losses of gold occurred during the preparation, and it was possible to adjust various gold contents up to 10 wt% Au.     

The fate of fuel-nitrogen during gasification of biomass in a pressurised fluidised bed gasifier

The distribution of fuel-nitrogen in gases, tar and char from gasification of biomass in a pressurised fluidised bed gasifier was investigated. Four species of biomass: birch, Salix, Miscanthus and Reed canary grass were gasified at 0.4 MPa and 900 °C. Oxygen-enriched nitrogen was used as fluidising agent. As a reference, gasification of Daw Mill coal was also carried out under the same experimental conditions. The experimental results illustrate that both the nature of the original fuels and the chemical structure of the nitrogen in the fuel have influence on the distribution of fuel-nitrogen in gases (NH₃, HCN, NO), tar and char under the employed experimental conditions. The present work also shows that the types of nitrogen heterocyclic compounds (NHCs) in the tar from different kinds of biomass are the same and the major compound is pyridine. However, the distribution of the various NHCs in the tar from the four species of biomass varies: the higher the content of fuel-nitrogen, the higher the concentration of two-ring NHCs in the tar. An effective method for extracting NHCs from the acidic absorption of the product gas was introduced in the present work. The method makes use of solid phase extraction (SPE) by a silica-based C₁₈ tube to extract the NHCs which subsequently were analysed by gas chromatography (GC) with flame ionisation detection (FID). The recovery and reproducibility of the SPE technique for NHCs is discussed.     

Syntheses of female sex pheromone precursors of pine sawfly species and of some structurally related methyl-branched long-chain 2-alkanols

3,7-Dimethyl-2-undecanol, 3,7,9-trimethyl-2-tridecanol, and 3,7, 11-trimethyl-2-tridecanol were synthesized as racemic mixtures in moderate yields. The alcohols are known precursors of the female sex pheromones of the pine sawfly species Diprion nipponica, Macrodiprion nemoralis, and Microdiprion pallipes, respectively. Stereoisomeric mixtures of 3,8,12-trimethyl-2-tridecanol, erythro-(2R,3R,11R/S)-3,11-dimethyl-2-tetradecanol, 3,5-dimethyl-2-tetradecanol, and 5,7-dimethyl-2-tetradecanol, structurally related to sex pheromone alcohol precursors of pine sawfly species, were also synthesized in moderate yields. The key reaction in the syntheses was the ring opening of -butyrolactones by using different alkyl lithiums as nucleophiles.     

Automatic data collection for enterprise architecture models

Enterprise Architecture (EA) is an approach used to provide decision support based on organization-wide models. The creation of such models is, however, cumbersome as multiple aspects of an organization need to be considered, making manual efforts time-consuming, and error prone. Thus, the EA approach would be significantly more promising if the data used when creating the models could be collected automatically—a topic not yet properly addressed by either academia or industry. This paper proposes network scanning for automatic data collection and uses an existing software tool for generating EA models (ArchiMate is employed as an example) based on the IT infrastructure of enterprises. While some manual effort is required to make the models fully useful to many practical scenarios (e.g., to detail the actual services provided by IT components), empirical results show that the methodology is accurate and (in its default state) require little effort to carry out.     

Swelling and mechanical properties of cellulose hydrogels. I. Preparation,characterization, and swelling behavior

Cellulose hydrogels have been synthesized by reacting solutions of cellulose xanthate with different amounts of epichlorohydrin (0–24% w/w on cellulose) after which the cellulose was regenerated. The weight fraction of crystalline cellulose, determined by density measurements, decreases with the extent of chemical crosslinking and was estimated to vary between 30 and 42% for dry gels. The degree of equilibrium swelling in water of the prepared hydrogels varied between 3.05 and 6.33 g water/g dry gel (g/g). The degree of swelling decreases with increasing chemical crosslinking. As a result of the irreversible changes occurring during drying, the degree of swelling in water can be reduced down to 0.74 g/g. According to density gradient column measurements, the partial specific volume of water is 0.865 cm³/g at water contents below 0.13 g/g. It is suggested that water having this partial specific volume is the specific hydration water. At higher water contents, the partial specific volume of gel water equals the specific volume of bulk water. It is implicit in the interpretation of the density data in terms of a two state model of gel water that the crystallinity of cellulose is independent of the water content. Depending on the degree of swelling, heat treatment resulted in either an irreversible increase or decrease of the degree of swelling.     

Synthetic polymeric absorbent for dye based on chemically crosslinked acrylamide/mesaconic acid hydrogels

Adsorption properties of copolymers of acrylamide and mesaconic acid (CAME) in aqueous Basic Blue 12 (Nile blue chloride) solution have been investigated. Chemically crosslinked CAME hydrogels with various compositions were prepared from ternary mixtures of acrylamide (A), mesaconic(ME) acid, and water by free radical polymerization in aqueous solution, using a multifunctional crosslinker such as ethylene glycol dimethacrylate (EGDMA). Dynamic swelling tests in water was applied to the hydrogels. Weight swelling ratio (S) values have been calculated. Sorption of Basic Blue 12 (BB 12) onto CAME hydrogels was studied by batch sorption technique at 25°C. In the experiments of the sorption, L type sorption in the Giles classification system was found. Some binding parameters such as initial binding constant (K_i), equilibrium constant (K), monolayer coverage (n), site‐size (u), and maximum fractional occupancy (Ô) for CAME hydrogels‐BB 12 binding system were calculated by using Klotz, Scatchard, and Langmuir linearization methods. Finally, the amount of sorbed BB 12 per gram of dry hydrogel (q) was calculated to be 2.28 × 10^?6–7.91× 10^?6 mol BB 12 per gram for hydrogels. Sorption % was changed range 16.09–58.86%. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 405–413, 2006     

Associations between apolipoprotein E genotype and circulating F<Subscript>2</Subscript>-isoprostane levels in humans

Apolipoprotein E (apoE), an important determinant of plasma lipoprotein metabolism, has three common alleles (ε2, ε3, and ε4). Population studies have shown that the risk of diseases characterized by oxidative damage, such as coronary heart disease and Alzheimer’s disease, is significantly higher in ɛ4 carriers. We evaluated the association between apoE genotypes and plasma F₂-isoprostane levels, an index of lipid peroxidation, in humans. Two hundred seventy-four healthy subjects (104 males, 170 females; 46.9±13.0 yr; 200 whites, 74 blacks; 81 nonsmokers, 64 passive smokers, and 129 active smokers) recruited for a randomized clinical antioxidant intervention trial were included in this analysis. ApoE genotype was determined by PCR and restriction enzyme digestion. Free plasma F₂-isoprostane was measured by GC-MS. Genotype groups were compared using multiple regression analysis with adjustment for sex, age, race, smoking status, body mass index, plasma ascorbic acid, and β-carotene. Subjects with ε3/ε4 and ε4/ε4 genotype (ε4-carriers) and with ε2/ε3 and ε3/ε3 (non-ε4-carriers) were pooled for analysis. In subjects with high cholesterol levels (total cholesterol above 200 mg/dl), plasma F₂-isoprostane levels were 29% higher in ε4 carriers than in non-ε4-carriers (P=0.0056). High-cholesterol subjects that are ε4 carriers have significantly higher levels of lipid peroxidation as assessed by circulating F₂-isoprostane levels.