Preparation and structural study of Mg<Subscript>1−<Emphasis Type="Italic">x</Emphasis></Subscript>Zn<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>TiO<Subscript>3</Subscript> ceramics and their dielectric properties from 1 Hz to 7.7 GHz

A series of Mg_1?x Zn _x TiO₃, x = 0–0.5 (MZT0–MZT0.5) ceramics was synthesised and characterised. The dielectric properties of the samples in the frequency range of 1 Hz–7.7 GHz were explored using three different methods: a contacting electrode method, a parallel-plate method and a perturbed resonator method. The electrical properties in the space charge and dipolar polarisation frequency ranges are discussed in relation to the phase composition and microstructure data. Differences in the zinc substitution divided the dielectrics into two groups, namely MZT0–MZT0.2 and MZT0.3–MZT0.5, each with different amount of a main Mg_1?x Zn _x TiO₃ solid solution phase and a secondary solid solution phase. Zinc substitution promoted the density of the ceramics, improved the purity of the main phase and increased the permittivity for frequencies up to 10⁸ Hz, but reduced the permittivity in the microwave range. In the MZT0.3–MZT0.5 samples, for frequencies less than 1 MHz the quality (Q × f) factors were lower and log σ _a.c, the AC conductivity, was higher than for the MZT0–MZT0.2 samples. Above 10 MHz, the (Q × f) factors and log σ _a.c of the two groups were similar.     

Pulmonary infiltrates in neutropenic patients with acute leukemia during chemotherapy: outcome and prognostic factors

STUDY OBJECTIVE: To determine predictors of mortality from pulmonary infiltrates in neutropenic patients with acute leukemia during chemotherapy, and the significance of those factors related to the underlying malignancy and its therapy as well as of those related to the severity of the illness associated with pulmonary infiltrates. DESIGN: A historical cohort study. SETTING: A university teaching hospital and tertiary referral center. PATIENTS AND METHODS: Overall, 53 patients with neutropenia during chemotherapy and with first episodes of pulmonary infiltrates during a 4-year period were studied. Prognostic analysis included 38 variables. Multivariate analyses were performed by logistic regression. RESULTS: The survival rate from pneumonia was 57% (30/53). The following eight parameters were significantly associated with death in univariate analysis: comorbidity present; development of "late" pulmonary infiltrates (> or = 14 days after hospital admission); heart rate > or = 100 beats/min; a ratio heart rate/systolic blood pressure (HR/SBP) > or = 1.2; urea nitrogen > 7 mmol/L; radiographic score > or = 3; neutropenia < 1.0x10(9)/L at the treatment end point; and failed complete remission. In a multivariate model including only parameters available at diagnosis of pulmonary infiltrates, the presence of a ratio HR/SBP > or = 1.2 and of a radiographic score > or = 3 remained independently associated with death. In a second model also including the evolutionary parameter neutropenia < or = 1.0x10(9)/L at the treatment end point, both parameters remained significant together with neutropenia <1.0x 10(9)/L at the treatment end point. The presence of a ratio HR/SBP > or = 1.2 was a strong marker of early death. CONCLUSION: Both therapy- and malignancy-associated neutropenia as well as the severity of illness associated with pulmonary infiltrates are independent prognostic factors. Patients with a ratio HR/SBP > or = 1.2 at diagnosis of pulmonary infiltrates suffer from potentially reversible acute illness, are at risk for early death and, therefore, may be appropriate candidates for treatment in an ICU.     

Thin and thick YBCO films grown by MOCVD processes. Study of the angular magnetic field dependence of current transport properties

Thin and thick YBCO Films have been grown by Aerosol Assisted as well as by thermal MOCVD. The Aerosol Assisted MOCVD technique allows the growth of YBCO films from a single liquid source at deposition rates of up to 10m/h.Transport measurements (I-V) on etched microbridges using a single pulse technique have been performed. The angular magnetic field dependence J_c() of the critical current density from T_c down to 50 K has been measured. Transport properties are reported and discussed with respect to the microstructural features as determined by X-ray diffraction and electron microscopy.     

Scan-based volume animation driven by locally adaptive articulated registrations

This paper describes a complete system to create anatomically accurate example-based volume deformation and animation of articulated body regions, starting from multiple in vivo volume scans of a specific individual. In order to solve the correspondence problem across volume scans, a template volume is registered to each sample. The wide range of pose variations is first approximated by volume blend deformation (VBD), providing proper initialization of the articulated subject in different poses. A novel registration method is presented to efficiently reduce the computation cost while avoiding strong local minima inherent in complex articulated body volume registration. The algorithm highly constrains the degrees of freedom and search space involved in the nonlinear optimization, using hierarchical volume structures and locally constrained deformation based on the biharmonic clamped spline. Our registration step establishes a correspondence across scans, allowing a data-driven deformation approach in the volume domain. The results provide an occlusion-free person-specific 3D human body model, asymptotically accurate inner tissue deformations, and realistic volume animation of articulated movements driven by standard joint control estimated from the actual skeleton. Our approach also addresses the practical issues arising in using scans from living subjects. The robustness of our algorithms is tested by their applications on the hand, probably the most complex articulated region in the body, and the knee, a frequent subject area for medical imaging due to injuries.     

Dynamical information fusion of heterogeneous sensors for 3D tracking using particle swarm optimization

This paper presents a new method for three dimensional object tracking by fusing information from stereo vision and stereo audio. From the audio data, directional information about an object is extracted by the Generalized Cross Correlation (GCC) and the object’s position in the video data is detected using the Continuously Adaptive Mean shift (CAMshift) method. The obtained localization estimates combined with confidence measurements are then fused to track an object utilizing Particle Swarm Optimization (PSO). In our approach the particles move in the 3D space and iteratively evaluate their current position with regard to the localization estimates of the audio and video module and their confidences, which facilitates the direct determination of the object’s three dimensional position. This technique has low computational complexity and its tracking performance is independent of any kind of model, statistics, or assumptions, contrary to classical methods. The introduction of confidence measurements further increases the robustness and reliability of the entire tracking system and allows an adaptive and dynamical information fusion of heterogenous sensor information.     

Maximum likelihood analysis of algorithms and data structures

We present a new approach for an average-case analysis of algorithms and data structures that supports a non-uniform distribution of the inputs and is based on the maximum likelihood training of stochastic grammars. The approach is exemplified by an analysis of the expected size of binary tries as well as by three sorting algorithms and it is compared to the known results that were obtained by traditional techniques. Investigating traditional settings like the random permutation model, we rediscover well-known results formerly derived by pure analytic methods; changing to biased data yields original results. All but one step of our analysis can be automated on top of a computer-algebra system. Thus our new approach can reduce the effort required for an average-case analysis, allowing for the consideration of realistic input distributions with unknown distribution functions at the same time. As a by-product, our approach yields an easy way to generate random combinatorial objects according to various probability distributions.     

Influence of the measurement conditions on the sensitivity of SnO2 gas sensors operated thermo-cyclically

The conductance of several tin oxide gas sensitive layers was simultaneously measured in thermo-cyclic and isothermal operation mode at various concentrations of CO and propene in air, respectively. Different measurement conditions were set by the cycle time, the gas flow rate, the humidity and the thickness of the sensitive layer. The sensor response is expressed by the conductance-over-time profiles (CTPs), the gas sensitivity or by the sum of the CTP sampling points. The resultant sensitivities from the CTPs were found to be higher than those of the isothermal measurements. The CTPs considerably change with the kind of gas as well as with the variation of the measurement conditions. This is discussed for both types of target gases with respect to the temperature, the adsorbates assumed and the reaction kinetics in relation to the gas transport conditions in the porous gas sensitive layer.