The interfacial microstructure of joined single crystal and polycrystalline alumina

The interfacial microstructures of 96 and 98% polycrystalline alumina joined with single crystal sapphire have been investigated in relation to the joining parameters. Joining has been evaluated based on either using a thin spin-on silica interlayer or by placing the alumina and sapphire in direct contact. The materials were joined by placing the coated or uncoated surfaces in contact and heating in the range of 1340–1475 °C with minimum external load. With the aid of a silica interlayer, sapphire and 98% polycrystalline alumina were successfully joined in 180 min at 1400 °C and above, while samples without a silica interlayer failed to join under these conditions. However, sapphire and 96% polycrystalline alumina were joined both with and without the use of silica interlayer. A variety of interfacial morphologies have been observed, including amorphous regions, fine crystalline alumina, and intimate contact between the sapphire and polycrystalline alumina.     

High-power 1320-nm wafer-bonded VCSELs with tunnel junctions

A new long-wavelength vertical-cavity surface-emitting laser structure is described that utilizes AlGaAs-GaAs mirrors bonded to AlInGaAs-InP quantum wells with an intracavity buried tunnel junction. This structure offers complete wavelength flexibility in the 1250-1650 nm fiber communication bands and reduces the high free-carrier losses and bonded junction voltage drops in previous devices. The intracavity contacts electrically bypass the bonded junctions to reduce threshold voltage. N-type current spreading layers and undoped AlGaAs mirrors minimize optical losses. This has enabled 134/spl deg/C maximum continuous-wave lasing temperature, 2-mW room-temperature continuous-wave single-mode power, and 1-mW single-mode power at 80/spl deg/C, in various devices in the 1310-1340 nm wavelength range.     

Binary sequences with low aperiodic autocorrelation for synchronization purposes

An evolutionary algorithm is used to find three sets of binary sequences of length 49-100 suitable for the synchronization of digital communication systems. Optimization of the sets are done by taking into consideration the type of preamble used in data frames and the phase-lock mechanism of the communication system. The preamble is assumed to be either a pseudonoise (PN) sequence or a sequence of 1s. There may or may not be phase ambiguity in detection. With this categorization, the first set of binary sequences is optimized with respect to aperiodic autocorrelation which corresponds to the random (PN) preamble without phase ambiguity case. The second and third sets are optimized with respect to a modified aperiodic autocorrelation for different figures of merit corresponding to the predetermined preamble (sequence of 1s) with and without phase ambiguity cases.     

On teletraffic applications to OBS

We provide teletraffic models for loss probability evaluation of optical burst switching (OBS). We show that the popular Engset formula is not exact for OBS modeling and demonstrate that in certain cases it is not appropriate. A new exact model is provided. The various models are compared using numerical results for various OBS alternatives with and without burst segmentation.     

Degree of polarization degradation due to cross-phase modulation and its impact on polarization-mode dispersion compensators

A novel analytical model is proposed to predict the cross-phase modulation (XPM)-induced depolarization in a two-channel transmission system, in which the Stokes' vector of each channel rotates around a space-invariant pivot by a time-varying angle which depends on the total instantaneous optical power in the fiber, on the angle between pump and probe input Stokes' vectors, and on the walk-off between channels. The model leads to a simple formula of the probe degree of polarization (DOP) which is validated both by simulation and experiment. The model helps identify the key physical factors that determine the XPM-induced performance degradation of DOP-based first-order polarization-mode dispersion compensators, and experiments that quantify such degradation are presented.     

1.6 Tbit/s (40/spl times/40 Gbit/s) DPSK transmission over 3/spl times/100 km of TeraLight fibre with direct detection

By transmitting 40 channels over 300 km of TeraLight fibre, it is shown that optical differential phase shift keying can be used in 100 GHz-spaced 40 Gbit/s systems, with direct detection and a simple receiving filter. Chromatic dispersion tolerance around 300 ps/nm is also measured, compared to 70 ps/nm for NRZ.     

Programmable group-delay module using binary polarization switching

We demonstrate the first programmable group-delay module based on polarization switching. With a unique binary tuning mechanism, the device can generate any differential group delay value from -45 to +45 ps with a resolution of 1.40 ps, or any true-time-delay value from 0 to 45 ps with a resolution of 0.7 ps. The delay varying speeds for both applications are under 1 ms and can be as fast as 0.1 ms. We evaluate both the dynamic and static performances of the device while paying special attention to its dynamic figures of merit for polarization-mode dispersion emulation and compensation applications. Our experiment shows that the device exhibits a negligible transient-effect induced power penalty (<0.2 dB) in a 10-Gb/s nonreturn-to-zero system.     

An alternative blind feedforward symbol timing estimator using two samples per symbol

Recently, S.J. Lee proposed a blind feedforward symbol timing estimator that exhibits low computational complexity and requires only two samples per symbol (see IEEE Commun. Lett., vol.6, p.205-7, 2002). We analyze Lee's estimator rigorously by exploiting efficiently the cyclostationary statistics present in the received oversampled signal; its asymptotic (large sample) bias and mean-square error (MSE) are derived in closed-form expression. A new blind feedforward timing estimator that requires only two samples per symbol and presents the same computational complexity as Lee's estimator is proposed. It is shown that the proposed new estimator is asymptotically unbiased and exhibits smaller MSE than Lee's estimator. Computer simulations are presented to illustrate the performance of the proposed new estimator with respect to Lee's estimator and existing conventional estimators.     

Hotspot wireless LANs to enhance the performance of 3G and beyond cellular networks

At present, WLANs supporting broadband multimedia communications are being developed and deployed around the world. Standards include HIPERLAN/2 defined by ETSI BRAN and the 802.11 family defined by the IEEE. These systems provide channel adaptive data rates up to 54 Mb/s (in a 20 MHz channel spacing) over short ranges up to 200 m. The HIPERLAN/2 standard also specifies a flexible radio access network that can be used with a variety of core networks, including UMTS. It is likely that WLANs will become an important complementary technology to 3G cellular systems and will typically be used to provide hotspot coverage. In this article the complementary use of WLANs in conjunction with UMTS is presented. In order to quantify the capacity enhancement and benefits of cellular/hotspot interworking we have combined novel ray tracing, software-simulated physical layer performance results, and optimal base station deployment analysis. The study focuses on an example deployment using key lamppost mounted WLAN access points to increase the performance (in terms of capacity) of a cellular network.