Selecting an oxygen plant for a copper smelter modernization

The selection of an oxygen plant for the Cyprus Miami smelter modernization project began with a good definition of the use requirements and the smelter process variables that can affect oxygen demand. To achieve a reliable supply of oxygen with a reasonable amount of capital, critical equipment items were reviewed and reliability was added through the use of installed spares, purchase of insurance spare parts or the installation of equipment design for 50 percent of the production design such that the plant could operate with one unit while the other unit is being maintained. The operating range of the plant was selected to cover variability in smelter oxygen demand, and it was recognized that the broader operating range sacrificed about two to three percent in plant power consumption. Careful consideration of the plant “design point” was important to both the capital and operating costs of the plant, and a design point was specified that allowed a broad range of operation for maximum flexibility.     

Partnering on construction projects: a study of the relationshipbetween partnering activities and project success

Project partnering has generated considerable attention in the construction industry as a means for transforming hostile, adversarial owner-contractor relationships into a more collaborative, productive team. Empirical support for partnering, however, is limited. The present study used mailed questionnaire data to examine the relationship between specific partnering related activities and project success for 291 construction projects. All of the major partnering activities were found to be positively related to at least one of the measures of project success. The findings suggest that a comprehensive approach be applied to partnering on construction projects and that top management support for teamwork across organizations is critical to success     

1.3-μm continuous-wave lasing operation in GaInNAs quantum-welllasers

A 1.3-μm continuous wave lasing operation is demonstrated, for the first time, in a GaInNAs quantum-well laser at room temperature. This lasing performance is achieved by increasing the nitrogen content (up to 1%) in GaInNAs quantum layer. It is thus confirmed that this type of laser is suitable for use as a light source for optical fiber communications     

Wavelength shift in vertical cavity laser arrays on a patternedsubstrate

The authors demonstrate a spatially chirped emission wavelength in vertical cavity surface emitting laser (VCSEL) arrays grown by molecular beam epitaxy. The wavelength shift is due to a lateral thickness variation in the Al_0.2Ga_0.8As cavity, which is induced by a substrate temperature profile during growth. A 20 nm shift in lasing wavelength is obtained in a VCSEL array     

Remediation of RDX-Contaminated Water Using Alkaline Hydrolysis

The objective of this study was to assess the effectiveness of alkaline hydrolysis as an alternative ex situ technology for remediating groundwater contaminated with hexahydro-1,3,5-trinitro-1,3,5-triazine (RDX). Treatment in both batch reactor and continuous stirred tank reactor (CSTR) was investigated. RDX reactivity was strongly dependent on the reaction pH investigated (11–13). The batch system achieved pseudo-first-order RDX reaction rates in the range of (0.8–27.7)×10?3?min?1, corresponding to half-life periods of 17.9?to?0.5?h, respectively. In the CSTR system operated at the initial RDX concentration of 4.5×10?3?mM, 99% RDX removal was achieved with the hydraulic retention time of 2?days and the reaction pH of 11.9. Formate and nitrite were produced as the major hydrolysates in the CSTR system, indicating a simultaneous reaction mechanism involving RDX ring cleavage and elimination of the ring nitrogen. The net OH? demand used only for RDX removal in the CSTR was found to be 1.5, 390, and 130?M OH?/M RDXremoved at pH values of 11.9, 11.5, and 11.0, respectively. A conceptual cost analysis indicated that the expense of alkaline treatment may be comparable to the expense of granular activated carbon treatment for long treatment periods (30?years or more), due to the potentially lower annual operational cost of alkali treatment.     

Smaller diameters in hypercube-variant networks

A number of hypercube-variant networks attempt to improve the hypercube by adding extra connections and thus reducing the diameter of the constructed network. We briefly outline a model which describes these variant networks. Further, we show that by restricting this model, we can describe hypercube variants with exactly the same number of edges as the hypercube. We mention several such networks which all have diameter about n/2. We describe a new network within this class that has diameter about 2n/5, thus improving the best known previous bound by a constant factor. We show that within a limited construction paradigm our network is best possible. This revised version was published online in June 2006 with corrections to the Cover Date.