Microstructure and creep behavior in AE42 magnesium die-casting alloy

The micro structural analysis of die-cast AE42 reveals a correlation between micro structure and creep strength. A lamellar-phase Al₁₁RE₃, which dominates the interdendritic microstructure of the alloy, partly decomposes above 150‡C into Al₂RE and Al (forming Mg₁₇Al₁₂). The increased solubility of aluminum in magnesium at higher temperatures may also promote the decomposition of Al₁₁RE₃. The creep strength decreases sharply with these phase changes. A mechanism for the decrease in creep strength of AE42 is proposed whereby the reduced presence of lamellar Al1₁₁RE₃ and/or the presence of Mg₁₇Al₁₂ contribute to the observed poor creep strength at higher temperatures.     

Ultra-low noise single-photon detector based on Si avalanche photodiode

We report operation and characterization of a lab-assembled single-photon detector based on commercial silicon avalanche photodiodes (PerkinElmer C30902SH, C30921SH). Dark count rate as low as 5 Hz was achieved by cooling the photodiodes down to -80 °C. While afterpulsing increased as the photodiode temperature was decreased, total afterpulse probability did not become significant due to detector's relatively long deadtime in a passively-quenched scheme. We measured photon detection efficiency >50% at 806 nm.     

Correlation Between <Emphasis Type="Italic">T</Emphasis><Subscript>c</Subscript> and Hyperfine Parameters of Fe in Layered Chalcogenide Superconductors

Although pairing mechanism in unconventional superconductors is still an open question, the density of states at the Fermi level is considered to be one of the factors affecting the superconducting transition temperature. Herein, we report on ⁵⁷Fe-Mössbauer studies of β-FeSe, FeSe _0.5Te _0.5, and Rb _0.8Fe _1.6Se ₂ superconductors as well as two intercalate products consisting of FeSe layers and a lithium-containing molecular spacer in between. In these materials, the hyperfine parameters of ⁵⁷Fe are directly related to the 3d-electron density on Fe atoms and show strong correlation with superconducting properties.     

Tomographic imaging with polarized light

We report three-dimensional tomographic reconstruction of optical parameters for the mesoscopic light scattering regime from experimentally obtained datasets by using polarized light. We present a numerically inexpensive approximation to the radiative transfer equation governing the polarized light transport. This approximation is employed in the reconstruction algorithm, which computes two optical parameters by using parallel and perpendicular polarizations of transmitted light. Datasets were obtained by imaging a scattering phantom embedding highly absorbing inclusions. Reconstruction results are presented and discussed.     

Monte Carlo model of the penetration depth for polarization gating spectroscopy: influence of illumination-collection geometry and sample optical properties

Polarization-gating has been widely used to probe superficial tissue structures, but the penetration depth properties of this method have not been completely elucidated. This study employs a polarization-sensitive Monte Carlo method to characterize the penetration depth statistics of polarization-gating. The analysis demonstrates that the penetration depth depends on both the illumination-collection geometry [illumination-collection area (R) and collection angle (θ(c))] and on the optical properties of the sample, which include the scattering coefficient (μ(s)), absorption coefficient (μ(a)), anisotropy factor (g), and the type of the phase function. We develop a mathematical expression relating the average penetration depth to the illumination-collection beam properties and optical properties of the medium. Finally, we quantify the sensitivity of the average penetration depth to changes in optical properties for different geometries of illumination and collection. The penetration depth model derived in this study can be applied to optimizing application-specific fiber-optic probes to target a sampling depth of interest with minimal sensitivity to the optical properties of the sample.     

Regeneration of Pd/TiO2 catalyst deactivated in reductive CCl4 transformations by the treatment with supercritical CO2, ozone in supercritical CO2 or oxygen plasma

Carbonaceous deposits formation was established as the primary reason of Pd/TiO₂ catalyst deactivation during reductive processing of CCl₄ to form hydrodechlorination and oligomerization products. Three methods of carbonaceous deposits elimination were tested: (1) extraction by supercritical CO₂, (2) oxidation by ozone in supercritical CO₂, and (3) low-temperature glow-discharge oxygen plasma treatment. Synchronic thermal analysis confirms effective carbonaceous deposits removal during regeneration by ozone or low temperature glow-discharge oxygen plasma; by XPS deep oxidation of surface Pd after oxidative treatment (by ozone or oxygen plasma) was found. Thus H₂ reduction was proposed as the second step making possible full regeneration of initial catalytic activity of Pd/TiO₂.