Tunable fluorescence in chromophore-functionalized nanodiamond induced by energy transfer

Hybrid materials comprising diamond nanoparticles (ND) and oligo(phenylenevinylenes) (OPVs) have been synthesized by the covalent linking of acid-functionalized ND and OPV-amine. Chromophore-functionalized ND particles with long alkyl and π-conjugated groups are readily dispersed in various organic solvents without any precipitation after several hours. A careful study of the properties of the hybrid materials revealed an aggregation-induced energy transfer from the blue fluorescent nanodiamonds to green emitting OPVs. At very low concentrations the hybrid emits in the blue region, but as the concentration is increased a gradual transition from blue to green emission occurs. Competitive processes such as aggregation-induced enhanced emission and self-absorption have been ruled out and a molecular picture of the phenomenon is proposed. This strategy can open a plethora of new avenues for fluorescent nanodiamonds in optoelectronics and light harvesting apart from bio-imaging.     

Visible spectroelectrochemical characterization of Geobacter sulfurreducens biofilms on optically transparent indium tin oxide electrode

We report visible spectroelectrochemical (SEC) characterization of cytochrome c₅₅₂ (cyt c₅₅₂) in viable Geobacter sulfurreducens biofilms on tin-doped indium oxide (ITO) electrodes poised at 0.24 V vs. SHE. G. sulfurreducens biofilms were grown in minimal medium with acetate as electron donor (turnover conditions), followed by 24 h incubation in electron donor-depleted medium (non-turnover conditions). The electronic absorption spectra of G. sulfurreducens biofilms showed the lowest energy absorption band in the reduced state at 552 nm, which indicated excess of cyt c₅₅₂ in the biofilm. The spectra under non-turnover conditions displayed gradual reduction of the cyt c₅₅₂, following the step-wise decrease of electrode potential from 0.0 V to −0.6 V vs. standard calomel electrode (SCE). The spectral changes were fully reversible in both positive and negative direction of the scan potential, with average midpoint potential value of −0.42 V vs. SCE. Confocal microscopy analysis revealed that the thickness of biofilms under turnover conditions and non-turnover conditions was approximately 35 and 3.5 μm, respectively. This is the first study to observe the reversible redox conversion of cyt c₅₅₂ in viable G. sulfurreducens biofilms.     

Utilization of green seed canola oil for in situ epoxidation

Green seed canola oil is underutilized for edible purposes due to its high chlorophyll content, which makes it more susceptible to photo‐oxidation and ultimately reduces the oxidation stability. The present work is an attempt to compare the kinetics of epoxidation of crude green seed canola oil (CGSCO) and treated green seed canola oil (TGSCO) with peroxyacids generated in situ in presence of an Amberlite IR‐120 acidic ion exchange resin (AIER) as catalyst. Among the two oxygen carrier studied, acetic acid was found to be a better carrier than the formic acid, as it gives 8% more conversion of double bond than the formic acid. A detailed process developmental study was then performed with the acetic acid/AIER combination. For the oils under investigation parameters optimized were temperature (55°C), hydrogen peroxide to double bond molar ratio (2.0), acetic acid to double bond molar ratio (0.5), and AIER loading (15%). An iodine conversion of 90.33, 90.20%, and a relative epoxide yield of 90, 88.8% were obtained at the optimum reaction conditions for CGSCO and TGSCO, respectively. The formation of the epoxide product of CGSCO and TGSCO was confirmed by Fourier Transform IR Spectroscopy (FTIR) and NMR (1H NMR) spectral analysis.     

Effect of thermal aging on the crystal structural characteristics of poly(tetra fluoro ethylene)

The residual effects of cumulative thermal aging on the crystal structural characteristics of the fluoro carbon poly(tetra fluoro ethylene) (PTFE) have been studied by X‐ray diffraction methods. The initial hexagonal arrangement of the PTFE chains in a 15₇ helical conformation is left unaffected by the exposures to temperatures (T), up to and beyond its melting point, T_m. The unit cell registers a residual anisotropic volume expansion. The anisotropy arises from the enhanced enlargement of the basal plane dimension a compared with the axial dimension c. Conformational changes contributing to the observed increase in the chain length have been examined. Enhancement of residual crystallinity of samples aged at T's < T_m suggests that the selective thermal aging could be used as an effective tool to improve the initial crystallinity of commercially available PTFE. The activation energy for 50% enhancement in initial crystallinity has been estimated as 53.9 kJ mol^?1. Aging at 400°C, a temperature above T_m, is accompanied by markedly different features viz., deterioration in crystallinity and other structural characteristics. The overall behavior of thermally aged PTFE bears a marked similarity to many polyamides. POLYM. ENG. SCI., 47:1724–1729, 2007. © 2007 Society of Plastics Engineers     

Crystallization of Stoichiometric SbSI Glass

Congruent crystallization of antimony sulphoiodide (SbSI) glass of stoichiometric composition, which is prepared successfully for the first time using rapid melt‐quenching, has been investigated using differential scanning calorimetry (DSC). The results for glass powder show a glass transition at 127°C and two separate exothermal peaks with maxima around 140°C and 190°C. The ratio of the intensities of the exothermal peak at ~190°C to the peak at ~140°C increases as the particle size and heating rate are increased, but their total enthalpy remains constant at 62 ± 2 J/g for all DSC runs. Surface heating of the glass induced by a 520 nm CW laser shows two contracted regions: needle‐like crystalline formations at low temperature and bulk crystallization at high temperature. The observed phenomena and DSC results suggest two different kinds of crystallization of the SbSI phase: one‐dimensional crystallization at low temperature which starts from the sample surface and three‐dimensional bulk crystallization that continues the transformation to crystalline state at higher temperatures. The origin of the two different crystallizations can be traced to the strong anisotropy of the SbSI crystal structure due to the weak van der Waals interaction between covalent‐ionic chains (Sb₂S₂I₂)_n.     

Alumina dissolution process to fabricate bimodal pore architecture alumina with superior green and sintered properties

Herein, a straightforward, adaptable, and cost-effective approach has been proposed to realize the concept of dissolution of alumina in acidic aqueous media to fabricate porous alumina showing exceptional green machining properties and exhibiting good thermomechanical properties through in situ generated blowing agents and thermo-foaming process. The process involves dissolving alumina in concentrated sulfuric acid to generate aluminum hydroxide and aluminum sulfate, which act as blowing agents to produce pores in the final structure through a decomposition process at elevated temperatures. By varying the concentration of deionized water and acidification using sulfuric acid, different alumina slurries are prepared. Sintering shrinkage is well countered through simultaneous consolidation and decomposition process during the heat treatment, and a minimum shrinkage of 0.88% is achieved. In addition to its pore-forming properties, aluminum sulfate also provides strong binding effects to green bodies, contributing to their exceptional green machining properties. The resulting porous alumina exhibits a green flexural strength of up to 17 MPa, making it capable of bearing loads and forces during green machining. The sintered porous alumina fabricated in the study has a porosity range of 34.43%–59.24% and a flexural strength of 27.84–53.21 MPa. The prepared porous alumina also exhibits satisfactory thermal resistivity, with a minimum thermal conductivity of 1.23 W/m K, and has intra/intergranular space in the nano range. The coexistence of a combination of bimodal pores in a single monolithic matrix makes it exceptionally porous and suitable for an extensive spectrum of applications.     

Optimization of fused filament fabrication process parameters for mechanical responses of weather-resistant polymer (acrylonitrile styrene acrylate)

Additively manufactured polymeric products for automotive, aerospace, and biomedical applications are usually intended for service in an outdoor environment with high mechanical loading conditions. The strength and sustainability of the products can be significantly degraded due to the outdoor environmental conditions such as UV light, moisture, heat, and so forth. In this research work, a novel weather-resistant polymer (WRP) material, that is, acrylonitrile styrene acrylate (ASA), has been studied. Furthermore, this work aims to study the effect of process parameters and enhance the strength of WRP (ASA) specimens using the FFF process. The optimized process parameters, that is, build orientation (BO), extrusion temperature (ET), layer thickness (LT), and printing speed (PS), were identified based on the tensile and flexural strength using the Taguchi technique and statistical analysis. The best tensile and flexural strengths for the specimen were achieved at both orientations (XYZ and ZXY) TS: 255°C ET, 0.14 mm LT, 50 mm/s PS; and FS: 245°C ET, 0.28 mm LT, 50 mm/s PS, respectively. Regression model was developed to investigate the correlation between the process parameters with tensile and flexural strength. A validation test confirmed the findings, and the error between the actual and predicted values is less than ±10%.     

Design and Comparative Analysis of Heterogeneous Gate Dielectric Nanosheet TFET with Temperature Variance

Silicon - In this article, a Heterogeneous Gate-Dielectric Nanosheet Tunnel Field Effect Transistor (HD-NSH-TFET) with three channels is investigated using the 3-D Visual TCAD simulator. The HD...     

A class of discontinuous dynamical systems IV. A laboratory air-water system

An air-water experimental system consisting of two inlets and one outlet is constructed and characterised. It reaches the state of sliding mode, or equivalently, two phase slug flow. The linear hydraulic model proposed in the literature is adequate to describe it. Experimental data are used to tune this model. The resistance to the flow of air through the outlet valve during the two phase flow is much larger than that when air alone flows out. At the operating range, the resistance to water flow is not affected by the presence of air.     

Batch and continuous studies on treatment of pulp mill wastewater by Aeromonas formicans

Batch and continuous studies have been conducted on the treatment of black liquor from a kraft pulp and paper mill by a bacterial strain, Aeromonas formicans. The results of batch studies revealed that the strain was able to remove 71% and 78% of COD and lignin respectively, while the colour removal efficiency was around 86% in 10 days of retention time. The analysis of lignin degradation products by gas chromatography after 20 days of incubation revealed the formation of some phenolic acids, which were responsible for the decrease in pH during batch studies. The removal efficiencies of COD, colour and lignin obtained in continuous reactor studies were 73, 88 and 77% respectively for an 8 day detention period and these efficiencies were almost the same as obtained in batch studies. © 2001 Society of Chemical Industry