A Study of The Moisture-Uptake Kinetics of a Hygroscopic Pharmaceutical Powder

The moisture-uptake kinetics of a hygroscopic powder, sodium heparin contained in a cylindrical container, was determined using a novel moisture-uptake measuring device under a constant convective air flow. The amount of moisture uptake increased with the increase in the relative humidity of the air. The effect of powder-bed height on the total amount of moisture uptake was found to be significant only at the highest relative humidity (75%) evaluated in this study. However, the percent of weight increase of the powder as a result of moisture uptake decreases as the height of the powder bed increases. The results of this study are explained by the dynamic nature of the moisture-uptake process associated with the instrument.     

Limited expansion of the (CAG)n repeat of the Huntington gene: a premutation (?)

Pantoprazole is a specific inhibitor of the H+/K(+)-ATPase of the gastric parietal cell. The dose-dependency of a range of pantoprazole pharmacokinetic characteristics was studied. Twelve healthy male subjects were given 10, 20, 40 and 80 mg pantoprazole intravenously according to a randomized, single blind, 4-period change-over scheme. The area under the concentration vs time curve (AUC) and the maximum serum concentration (Cmax) showed a linear increase in line with the dose. Apparent volume of distribution (Vd area), clearance (Cl) and terminal half-life (t1/2) were independent of the dose. The dose-independent elimination of pantoprazole was attributed to the lack of interaction of the drug with cytochrome P450. In clinical practice, a good predictable response, as well as a low potential for interaction with other drugs might be expected.     

Job demands and worker health: Three-dimensional reexamination of the relationship between person€nvironment fit and strain.

The most influential study of the person–environment (P–E) fit approach to stress was conducted by J. R. French et al (1982). Unfortunately, this study operationalized fit using various transformations of difference scores, thereby introducing numerous substantive and methodological problems. In the present study, the authors reanalyze data from French et al, using a procedure described by J. R. Edwards (in press) that avoids problems with difference scores and captures the underlying 3-dimensional relationship between environment, person, and strain. Results resolve ambiguities in the French et al findings and identify relationships between environment, person, and strain that, although consistent with P–E fit theory, cannot be adequately represented by fit measures such as those used by French et al. Implications for P–E fit research are discussed. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Precipitation behavior of σ phase in fusion zone of dissimilar stainless steel welds during multi-pass GTAW process

The purpose of this study is to investigate the precipitation characteristics of σ phase in the fusion zone of stainless steel welds at various welding passes during a tungsten are welding (GTAW) process. The morphology, quantity, and chemical composition of the δ-ferrite and σ phase were analyzed using optical microscopy (OM), a ferritscope (FS), a X-ray diffractometer (XRD), scanning electron microscopy (SEM), an electron probe micro-analyzer (EPMA), and a wavelength dispersive spectrometer (WDS), respectively. Massive δ-ferrite was observed in the fusion zone of the first pass welds during welding of dissimilar stainless steels. The σ phase precipitated at the inner δ-ferrite particles and decreased δ-ferrite content during the third pass welding. The σ and δ phases can be stabilized by Si element, which promoted the phase transformation of σ→ϱ+λ₂ in the fusion zone of the third pass welds. It was found that the σ phase was a Fe−Cr−Si intermetallic compound found in the fusion zone of the third pass welds during multi-pass welding.     

Distribution and Fate of Escherichia coli in Lake Michigan Following Contamination with Urban Stormwater and Combined Sewer Overflows

Escherichia coli distribution and persistence in nearshore Lake Michigan were assessed following heavy rains and sanitary sewer overflow (SSO) and combined sewer overflow (CSO) events over a 5-year period, including an 18-day period following 25.4 cm of rainfall in which intensive studies were conducted following multiple CSO and SSO events. E. coli levels in the Milwaukee estuary and harbor following SSO and CSO events ranged from 10⁴ to nearly 10⁵ CFU/100 mL, which were significantly higher (p ≤ 0.05) than levels following rainfall alone. Sites outside of the breakwall but within the contamination plume (e.g., within 2 km of the harbor) were an order of magnitude lower. Locations 2–5 km from the harbor ranged from below detection limits, of < 1 to 5 CFU/100 mL. E. coli levels corrected for dilution based on specific conductivity measurements were lower than what would be expected for loss due to dilution alone, suggesting a combination of die-off and dilution, were responsible for the rapid disappearance of these organisms outside of the harbor. E. coli and fecal coliforms measured concurrently demonstrated that fecal coliforms could be recovered longer than E. coli in the open waters of the lake. E. coli isolated directly from sewage treatment plant influent were found to have a marked increase in antibiotic resistance traits for ten antibiotics commonly used in the human population compared with isolates from two animal sources of fecal pollution. However, E. coli obtained from sewage impacted water (n = 2,513) and from stormwater impacted water (n = 1,465) collected the previous year when there were no sewage overflows, were found to have no significant difference (p < 0.05) in the frequency of resistance when comparing the two conditions. E. coli survival characteristics and population dynamics are most likely influenced by multiple factors in complex systems such as the watershed/estuarine/lake environments of the Great Lakes.     

A Survey on the Numerics and Computations for the Landau-Lifshitz Equation of Micromagnetism

The Landau-Lifshitz (LL)equation of micromagnetism governs rich variety of the evolution of magnetization patterns in ferromagnetic media. This is due to the complexity of physical quantities appearing in the LL equation. This complexity causes also an interesting mathematical properties of the LL equation: nonlocal character for some quantities,nonconvex side-constraints, strongly nonlinear terms. These effects influence also the numerical approximations. In this work, recent developments on the approximation of weak solutions, together with the overview of well-known methods for strong solutions,are addressed. Author is supported by the Fund for Scientific Research - Flanders FWO (Belgium).     

Impact of Preferential P-Diffusion Along the Grain Boundaries on Fine-Grained Polysilicon Solar Cells

Thin-film polysilicon solar cells are a promising low-cost alternative for bulk silicon solar cells due to their reduced material thickness. Recently, we showed that the use of an amorphous silicon/polycrystalline silicon heterojunction emitter instead of a diffused homojunction emitter led to a boost in the open-circuit voltage by 90 mV. Now, we present a full evidence that shows that this improvement is related to the absence of dopant smearing along the grain boundaries. By using scanning spreading resistance microscopy, we found an enlargement of the junction area by a factor of five in case of a homojunction. The tips of the dopant spikes represent lowly doped areas with an enhanced recombination.