Optimization of conditions for hydrogen production from complex dairy wastewater by anaerobic sludge using desirability function approach

Present study deals with the multiple-response optimization for biohydrogen production using anaerobic sludge and outstanding approach to overcome the drawbacks of conventional response surface methodology (RSM). Dairy wastewater was used as source in batch fermentation was followed for this study. Response surface methodology (RSM), based on a three level, four variable Box–Behnken design, was employed to obtain the best possible combination of substrate concentration, pH, COD/N ratio and COD/P ratio for maximum H₂ yield (HY) and specific hydrogen production rate (SHPR). Experimental data were evaluated by applying RSM integrating a desirability function approach. The optimum H₂ yield and SHPR conditions were: substrate concentration 15.3 g COD/L, pH 5.5, COD/N ratio 100.5 and COD/P ratio 120 with maximum overall desirability D of 0.94. The confirmation experiment under these optimal condition showed a HY and SHPR of 13.54 mmol H₂/g COD and 29.91 mmol H₂/g-VSS.d, respectively. This was only 0.22% and 0.20%, respectively, different from the predicted values, suggesting that the desirability function approach with RSM was a useful technique to get the maximum H₂ yield and SHPR simultaneously.     

Fabrication and characterization of poly(methyl methacrylate)/CaCu3Ti4O12 composites

Composites comprising Poly(Methyl Methacrylate) (PMMA) and CaCu₃Ti₄O₁₂ (CCTO) via melt mixing followed by hot pressing were fabricated. These were characterized using X‐ray diffraction, thermo gravimetric, scanning electron microscopy, and Impedance analyzer for their structural, morphology, and dielectric properties. Composites were found to have better thermal stability than that of pure PMMA. The composite, with 38 Vol % of CCTO (in PMMA), exhibited remarkably low dielectric loss at high frequencies and the low frequency relaxation is attributed to the space charge polarization/MWS effect. Theoretical models were employed to rationalize the dielectric behavior of these composites. At higher temperatures, the relaxation peak shifts to higher frequencies, due to the merging of both β and α relaxations into a single dielectric dispersion peak. The AC conductivity in the high frequency region was attributed to the electronic polarization. POLYM. ENG. SCI., 54:551–558, 2014. © 2013 Society of Plastics Engineers     

Rheological Studies on Virgin and Metallized Unsymmetrical Dimethyl Hydrazine Gelled Systems

Rheological studies on unsymmetrical dimethyl hydrazine-methyl cellulose gelled system have been conducted under varying shear rates in order to establish its flow characteristics. The gel is found to behave as a pseudoplastic thixotrop. The viscosity build-up with respect to time has been traced till apparently a firm gel is set. The viscosity is found to increase with time rapidly in the beginning and minor changes are observed thereafter. The effect of temperature and extent of metal (Al and Mg) loading on apparent viscosity of the gelled system has also been investigated. Both the apparent viscosity and thixotropic character of the virgin gel are found to decrease with increase in temperature. An increase in rate of shear decreases the apparent viscosity significantly. The thixotropic character of the metallized gelled systems is observed to increase with metal content and that they exhibit a shearthinning behaviour too. Power law has been applied to assess the variation of pseudoplastic index n and consistency index K with temperature and metallization. The results reveal that n increases with temperature and decreases with metal loading whereas K shows an opposite trend. The yield value of gelled systems is noted to show decrease with temperature and increase with metal incorporation.     

Premarin Reduces Neurodegeneration and Promotes Improvement of Function in an Animal Model of Spinal Cord Injury

Spinal cord injury (SCI) causes significant mortality and morbidity. Currently, no FDA-approved pharmacotherapy is available for treating SCI. Previously, low doses of estrogen (17β-estradiol, E2) were shown to improve the post-injury outcome in a rat SCI model. However, the range of associated side effects makes advocating its therapeutic use difficult. Therefore, this study aimed at investigating the therapeutic efficacy of Premarin (PRM) in SCI. PRM is an FDA-approved E2 (10%) formulation, which is used for hormone replacement therapy with minimal risk of serious side effects. The effects of PRM on SCI were examined by magnetic resonance imaging, immunofluorescent staining, and western blot analysis in a rat model. SCI animals treated with vehicle alone, PRM, E2 receptor antagonist (ICI), or PRM + ICI were graded in a blinded way for locomotor function by using the Basso–Beattie–Bresnahan (BBB) locomotor scale. PRM treatment for 7 days decreased post-SCI lesion volume and attenuated neuronal cell death, inflammation, and axonal damage. PRM also altered the balance of pro- and anti-apoptotic proteins in favor of cell survival and improved angiogenesis and microvascular growth. Increased expression of estrogen receptors (ERs) ERα and ERβ following PRM treatment and their inhibition by ER inhibitor indicated that the neuroprotection associated with PRM treatment might be E2-receptor mediated. The attenuation of glial activation with decreased inflammation and cell death, and increased angiogenesis by PRM led to improved functional outcome as determined by the BBB locomotor scale. These results suggest that PRM treatment has significant therapeutic implications for the improvement of post-SCI outcome.     

Quantitative real-time PCR analysis of total and propidium monoazide-resistant fecal indicator bacteria in wastewater

A real-time quantitative PCR (qPCR) method and a modification of this method incorporating pretreatment of samples with propidium monoazide (PMA) were evaluated for respective analyses of total and presumptively viable Enterococcus and Bacteroidales fecal indicator bacteria. These methods were used in the analyses of wastewater samples to investigate their feasibility as alternatives to current fecal indicator bacteria culture methods for predicting the efficiency of viral pathogen removal by standard treatment processes. PMA treatment was effective in preventing qPCR detection of target sequences from non-viable cells. Concentrates of small volume, secondary-treated wastewater samples, collected from a publicly owned treatment works (POTW) under normal operating conditions, had little influence on this effectiveness. Higher levels of total suspended solids, such as those associated with normal primary treatment and all treatment stages during storm flow events, appeared to interfere with PMA effectiveness under the sample preparation conditions employed. During normal operating conditions at three different POTWs, greater reductions were observed in PMA-qPCR detectable target sequences of both Enterococcus and Bacteroidales than in total qPCR detectable sequences. These reductions were not as great as those observed for cultivable fecal indicator bacteria in response to wastewater disinfection. Reductions of PMA-qPCR as well as total qPCR detectable target sequences from enterococci and, to a lesser extent, Bacteroidales correlated well with reductions in infectious viruses during both normal and storm flow operating conditions and therefore may have predictive value in determining the efficiency at which these pathogens are removed.     

Triphasic ceramic coated hydroxyapatite as a niche for goat stem cell-derived osteoblasts for bone regeneration and repair

Current treatment strategies for the repair or replacement of bone use synthetic implants with stem cells and their progeny––a new approach to address unmet medical needs. This study has evaluated the effect of a silica-coated bioactive ceramic, namely HASi in comparison to hydroxyapatite (HA) on the adhesion, proliferation and osteogenic differentiation of goat bone marrow-derived mesenchymal stem cells in vitro in a prolonged culture of 28 days. The cellular activities were significantly enhanced on HASi signifying the role of silica to stimulate osteoblast cells. The fabrication of such a ‘cell-ceramic construct using autologous MSCs’ is aimed for the transplantation to a large bone defect site in the goat femur model which still remains a formidable challenge in Orthopedic surgery.     

Turmeric nanofiber-encapsulated natural product formulation act as a phytogenic feed additive—A study in broilers on growth performance,biochemical indices of blood,and E. coli in cecum

A phytogenic feed additive (PFA) formulation was prepared with bioactive molecules—curcuminoids, gingerol, and carvacrol by encapsulating in nanofiber isolated from turmeric spent (turmeric nanofiber, TNF). This formulation was completely characterized by scanning electron microscope, ultra performance liquid chromatography, and gas chromatography and evaluated for its efficacy. PFA-encapsulated TNF (PFA@TNF) considerably increased mean body weight, decreased cholesterol level, mortality rate, and reduced Escherichia coli content of broilers than antibiotic growth promoter (AGP). The depth of crypts in the ileum of broilers was considerably reduced by the inclusion of PFA@TNF in diets compared with the AGP.     

Combustion synthesis of Ni3Al and Ni3Al-matrix composites

The self-propagating mode of combustion synthesis (SHS) of Ni₃Al starting from compacts of stoichiometrically mixed Ni and Al powders readily forms fully reacted structures with about 3 to 5 pct porosity, if green density of the compacts is greater than about 75 pct of theoretical. SHS-produced Ni₃Al matrix composites with up to 2 wt pct A1₂O₃ whiskers also have relatively low porosity levels. Porosity increases rapidly with lower green densities, higher Al₂O₃, or SiC whisker contents, and the degree of reaction completeness diminishes. The SiC whiskers undergo reaction with the matrix, while Al₂O₃ whiskers are nonreactive. All of these observations correlate well with temperature measurements made during the course of the reaction. The SHS mode can be achieved with agglomerated particle size ratioD _Al/D _Ni ≥ 1, larger than the limit established from studies of the thermal explosion mode of combustion synthesisD _Al/D _Ni ≃ 0.3. This paper is based on a presentation made in the symposium “Reaction Synthesis of Materials” presented during the TMS Annual Meeting, New Orleans, LA, February 17–21, 1991, under the auspices of the TMS Powder Metallurgy Committee.     

Effect of isomerization on thermal behaviour of bisitaconimides

The effect of isomerization of N,N′‐bisitaconimido‐4,4′‐diphenyl ether to the corresponding biscitraconimide on the curing characteristics and thermal stability of cured resins is described. Resins having bisitaconimide:biscitraconimide ratios of 23:77–93:7 were prepared by reacting 4,4′‐diaminodiphenyl ether with itaconic anhydride in solvents of different polarities and under different reaction conditions. Resins containing a higher proportion of citraconimide had a lower melting point (191 vs 208 °C). The curing exotherm was observed immediately after melting in all the resins and exothermic peak temperature reduced with increase in citraconimide content. Resins having a higher proportion of citraconimide on isothermal curing (200 °C, 2 h) and subsequent heating in nitrogen atmosphere degraded at a slightly lower temperature. However, the char yield at 800 °C did not show any systematic dependence on citraconimide content. © 2002 Society of Chemical Industry     

Thermal behavior of aryl-aliphatic polyamides

Low molecular weight poly(p-phenylene sebacamides) and (m-phenylene sebacamides) were prepared by interfacial polycondensation by varying the concentration of p-and m-phenylenediamine in the initial feed. The polymers were characterized by intrinsic viscosity measurement and IR spectra. The relative thermal stability was evaluated by differential thermal analysis and dynamic thermogravimetry in air and nitrogen atmospheres. A systematic dependence of stability on intrinsic viscosity of poly(m-phenylene sebacamide) was observed indicating an endgroup initiation of degradation. No such dependence was observed in poly(p-phenylene sebacamide). A probable mechanism for the thermal degradation has been proposed.