Curing characteristics of epoxy resins filled with cellulose and oxidized cellulose

Gel time and Brookfield viscosity studies of epoxy resins containing varying concentrations of cellulose, periodate oxidized cellulose, chromic acid oxidized cellulose, and ethylene glycol were carried out at 120°C using the tertiary amine hexamethylene tetramine as catalyst. It was found that the hydroxyl groups of cellulose and oxidized cellulose did not only act as accelerators for the tertiary amine catalyzed polymerization of the epoxy resin, but evidence was also found which pointed to the actual participation of the cellulosic fillers in the crosslinking reaction leading to the thermoset epoxy polymer. The gel times of the epoxy curing reaction decreased as the concentrations of the cellulosic fillers increased. The change in viscosity with time (curing characteristics) curves for 40 parts of cellulose or oxidized cellulose per hundred parts of resin (phr) were similar to that of 10 phr ethylene glycol, while the curve for 20 phr cellulose-filled epoxy resin was almost identical to the curve for 10 phr periodatefilled resin. These differences are explained on the basis of the percentage of hydroxyl groups in the various filler molecules that are available for their role as accelerators. The possibility of greater participation of oxidized cellulose in the network formation with the epoxy resin than ordinary cellulose has also been surmised on the basis of its increased viscosity build-up after the gel time is achieved.     

Isothermal diffusion—reaction in a slab catalyst with bimolecular Langmuir-Hinshelwood kinetics: Connections with negative first-order kinetics

The problem of isothermal diffusion-reaction in a slab catalyst with bimolecular Langmuir—Hinshelwood kinetics is studied. Analytic solutions for the concentration profile and the catalytic effectiveness factor are reported for the full range of Thiele modulus values, in the limit of large adsorption inhibition constant. In this limit, connections with negative first-order kinetics are shown, and rather good explicit estimates of the region of multiple steady states are provided. Comparisons with numerical calculations are also made.     

Enhanced specificity of truncated transmembrane protein for serologic confirmation of human T-cell lymphotropic virus type 1 (HTLV-1) and HTLV-2 infections by western blot (immunoblot) assay containing recombinant envelope glycoproteins

Immunoassays based on the highly immunogenic transmembrane protein of human T-cell lymphotropic virus type 1 (HTLV-1) (protein 21c) are capable of detecting antibodies in all individuals infected with HTLV-1 and HTLV-2. However, because of antigenic mimicry with other cellular and viral proteins, such assays also have a large proportion of false-positive reactions. We have recently identified an immunodominant epitope, designated GD21-I located within amino acids 361 to 404 of the transmembrane protein, that appears to eliminate such false positivity. This recombinant GD21-I protein was used in conjunction with additional recombinant HTLV type-specific proteins and a whole virus lysate to develop a modified Western blot (immunoblot) assay (HTLV WB 2.4). The sensitivity and specificity of this assay were evaluated with 352 specimens whose infection status was determined by PCR assay for the presence or absence of HTLV-1/2 proviral sequences. All HTLV-1-positive (n = 102) and HTLV-2-positive (n = 107) specimens reacted with GD21-1 in the HTLV WB 2.4 assay, yielding a test sensitivity of 100%. Furthermore, all specimens derived from individuals infected with different viral subtypes of HTLV-1 (Cosmopolitan, Japanese, and Melanesian) and HTLV-2 (IIa0, a3, a4, IIb1, b4, and b5) reacted with GD21-I in the HTLV WB 2.4 assay. More importantly, HTLV WB 2.4 analysis of 81 PCR-negative specimens, all of which reacted to recombinant protein 21e in the presence or absence of p24 and p19 reactivity in the standard WB assay, showed that only two specimens retained reactivity to GD21-I, yielding an improved test specificity for the transmembrane protein of 97.5%. None of 41 specimens with gag reactivity only or 21 HTLV-negative specimens demonstrated reactivity to GD21-I. In an analysis of additional specimens (n = 169) from different geographic areas for which PCR results were not available, a substantial increase in the specificity of GD21-I detection was demonstrated, with no effect on the sensitivity of GD21-I detection among specimens from seropositive donors. Thus, the highly sensitive, GD21-I-based HTLV WB 2.4 assay eliminates the majority of false-positive transmembrane results, thereby increasing the specificity for serologic confirmation of HTLV-1 and HTLV-2 infections.     

Non-medical drug use amongst non-student youth in India

In a survey of non-medical drug use by 266 non-students in the age range 10-24 years, tobacco, alcohol and cannabis were found to be the drugs more commonly used. Use was greater in males, older age groups, those with lower educational levels and those from urban areas. In comparison to students, among non-students use was practically limited to tobacco, alcohol and cannabis, the use was more regular and the age at onset lower. In a pilot trial of two additional strategies to identify drug users among non-student youth, namely cross-validation by fellow employees and verbal group administration of the questionnaire, the number of current users identified was very similar to that found by individual verbal administration, suggesting that these cheaper methods may be useful in some circumstances.     

Spray Drying of Metal Alkoxide Sol for Strontium Titanate Ceramics

Conditions for obtaining a stable sol in an isopropyl alcohol–water medium containing titanium isopropoxide and strontium nitrate, and acetic acid as a modifier, have been described. Spray drying of the sol results in submicrometer spherical agglomerates which on further thermal decomposition yield submicrometer particles of strontium titanate at temperatures as low as 500°C. The thermal decomposition characteristics of the spray-dried precursor and the development of strontium titanate phase have been discussed. Calcined precursor powder possesses a specific surface area of 12m²/g, a comp action density of 57%, and a sintered density of > 98%. The optimum sintering temperature of such a powder was 1450°C, which resulted in a sintered grain size around 1.5 μm. Further, such a sintered sample had a dielectric constant of 260 and a loss factor of 0.008 at 1 kHz. This method appears to be very convenient with respect to handling of stable sols and thus avoids the usual difficulties regarding extended gelation as well as inhomogeneous precipitation.     

Processing of mesocarbon microbeads to high-performance materials: Part III. High-temperature sintering and graphitization

The sintering and graphitization behavior of mesocarbon microbeads (MCMB) at high temperatures (1900-2800 K) is investigated. It is shown that while the low temperature sintering performance of MCMB is unique, at high temperature it appears to be similar to that of conventional materials. In contrast, the obtained activation energy for MCMB high-temperature graphitization is ∼100 kcal/mol, which is smaller than that (∼240 kcal/mol) for typical carbon systems. It is concluded that the combination of such unique properties as excellent compressibility, low temperature sinterability, and rapid graphitization makes MCMB an attractive precursor for manufacturing carbon-based materials.     

Energy efficiency of allpass ARMA impulse-equivalent periodic sequences

Periodic sequences with good discrimination, merit factor and energy efficiency can be generated using an allpass ARMA unit sample response. The dependence of these parameters on the first- and second-order transfer functions is studied and some results are presented up to a length of 16.