有广阔市场前景的化工产品—过氧化钙

本文叙述过氧化钙的性质,并以实例说明过氧比钙在水产养殖、食品加上、果蔬保鲜。环境保护、农作物栽培、橡胶及化工等奋方面的应用。     

Event-driven observer-based output feedback control for linear systems

This paper concerns the problem of event-driven observer-based output feedback control of linear systems. Contrary to normal sampled-data control systems, where the controller is updated periodically, in event-driven systems, it is updated only when an “event” happens, and a typical event is defined as some error signals exceeding a given threshold. Both continuous- and discrete-time event detector cases are considered. It is shown that even with the significantly reduced sampling frequency, the global uniform ultimate boundedness of the event-driven closed-loop systems can also be guaranteed. A numerical example is finally used to illustrate the effectiveness and advantages of the proposed approaches.     

Squaring down of general MIMO systems to invertible uniform rank systems via pre- and/or post-compensators

Pre- and/or post-compensators are designed to square down a general MIMO system to a uniform rank system, the structure of which is almost similar to a SISO system. The method of squaring down either does not change the finite zero structure of the given MIMO system or simply adds additional finite zeros in the left half s-plane. The significance of such a squaring down lies in the simplicity of the structure of a uniform rank system lending itself for easy analysis and control design.     

Local artificial boundary conditions for Schrödinger and heat equations by using high-order azimuth derivatives on circular artificial boundary

The aim of the paper is to design high-order artificial boundary conditions for the Schrödinger equation on unbounded domains in parallel with a treatment of the heat equation. We first introduce a circular artificial boundary to divide the unbounded definition domain into a bounded computational domain and an unbounded exterior domain. On the exterior domain, the Laplace transformation in time and Fourier series in space are applied to achieve the relation of special functions. Then the rational functions are used to approximate the relation of the special functions. Applying the inverse Laplace transformation to a series of simple rational function, we finally obtain the corresponding high-order artificial boundary conditions, where a sequence of auxiliary variables are utilized to avoid the high-order derivatives in respect to time and space. Furthermore, the finite difference method is formulated to discretize the reduced initial–boundary value problem with high-order artificial boundary conditions on a bounded computational domain. Numerical experiments are presented to illustrate the performance of our method.     

Synthesis,characterization, and thermal properties of phosphorus‐containing,wholly aromatic thermotropic copolyesters

A series of phosphorus‐containing, wholly aromatic thermotropic copolyesters from acetylated 2‐(6‐oxide‐6H‐dibenz〈c,e〉〈1,2〉oxa phosphorin‐6‐yl)‐1,4‐dihydroxy phenylene, p‐acetoxybenzoic acid, terephthalic acid, and isophthalic acid were prepared by melting polycondensation. The structure and basic properties of the polymers, such as the glass‐transition temperature (T_g), melting temperature (T_m), thermal stability, crystallinity, and liquid crystallinity, were investigated with Fourier transform infrared, elemental analysis, differential scanning calorimetry (DSC), thermogravimetric analysis, wide‐angle X‐ray diffraction, and hot‐stage polarizing optical microscopy. The copolyesters had relatively high T_g values ranging from 183 to 192°C. The T_m values obtained from DSC curves for samples P‐20 and P‐25 were 290 and 287°C, respectively (where the number in the sample name indicates the molar fraction of the phosphorus‐containing monomer in the reactants). The initial flow temperatures of other samples observed with hot‐stage polarizing microscopy were 271–290°C. The 5% degradation temperatures in nitrogen ranged from 431 to 462°C, and the char yields at 640°C were 41–52%. All the copolyesters, except P‐40, were thermotropic and nematic. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 1278–1284, 2002     

VideoGraph: a non-linear video representation for efficient exploration

In this paper we introduce VideoGraph, a novel non-linear representation for scene structure of a video. Unlike classical linear sequential organization, VideoGraph concentrates the video content across the time line by structuring scenes and materializes with two-dimensional graph, which enables non-linear exploration on the scenes and their transitions. To construct VideoGraph, we adopt a sub-shot induced method to evaluate the spatio-temporal similarity between shot segments of video. Then, scene structure is derived by grouping similar shots and identifying the valid transitions between scenes. The final stage is to represent the scene structure using a graph with respect to scene transition topology. Our VideoGraph can provide a condensed representation in the scene level and facilitate a non-linear manner to browse videos. Experimental results are presented to demonstrate the effectiveness and efficiency by using VideoGraph to explore and access the video content.     

Muscular fatigue and maximum endurance time assessment for male and female industrial workers

A single arm pushing experiment was conducted in an electronic factory in Yantai, China to assess muscular fatigue using the theoretical models of muscular strength and maximum endurance time (MET) developed by Ma et al. (2009). Seventy seven workers, including 38 males and 39 females, participated in the study. The muscular strength of pushing was measured after the subject pushed a stick, with a force of 2.5 kgf, for 0.5, 1.0, 1.5, 2.0, 2.5, and 3.0 min. Fatigue rate was determined based on a regression approach. In addition to the theoretical model, the MET for such a pushing task was also determined using four empirical models in the literature. The results indicated that females were more resistant to muscular fatigue than males in the pushing task. The results of the muscular strength prediction show that the predictability of the muscular strength model is acceptable. The prediction errors for muscular strength for female subjects were significantly lower than those of the male subjects. The predicted MET using the theoretical model, with a group constant k, was highly correlated with those using the empirical models compared in the current study.     

用于虚拟现实的360度视频编码技术新进展*

随着虚拟现实技术不断发展,360度视频编码开始成为研究热点。应用于虚拟现实的360度视频与传统的视频相比分辨率更高,编码数据量更大,在实际应用中面临传输带宽有限的瓶颈,编码效率问题有待解决。归纳分析了国际标准组织联合视频研究组（joint video exploration team, JVET）正在制定的360度视频编码投影变换技术及其编码优化方法,综合对比了各变换技术的编码性能。根据当前最新研究成果,对下一步研究需要解决的问题进行了探讨总结,给出未来的研究方向和思路。     

Influence of Grain Size on Ferroelastic Toughening and Piezoelectric Behavior of Lead Zirconate Titanate

Lead zirconate titanate specimens, at composition Zr_{48.9+- 1.0}/ Ti_51.1+-1.0 of grain sizes ranging from 0.5 to 15 (μm were prepared by hot pressing. The fracture toughness showed a 40% increase in the fine-grained specimens. Poling produced anisotropy in the fracture toughness. A tensor representation for the fracture toughness, now a function of the crack plane normal and the poling direction, is developed. The maximum and minimum values in the toughness tensor are shown to be related to the unpoled toughness by a simple phenomenological relationship. We also find that the piezoelectric coefficient, d₃₃ , shows a slight increase for the fine-grained specimens, which is in conflict with the general view that smaller-grained materials can sustain vanishingly small values of spontaneous polarization.     

Improvement of Microwave Loss Tangent and Tunability of Ba0.55Sr0.45TiO3/MgO Composites Using the Heterogeneous Precipitation Method

Ba_0.55Sr_0.45TiO₃/MgO composites were successfully prepared by the heterogeneous precipitation method and their structural, surface morphological, tunable properties, and dielectric properties at microwave frequency were systemically investigated. Compared with the sample prepared by the traditional solid-state method, the sample prepared by the heterogeneous precipitation method exhibits a smaller grain size, more uniform microstructure, higher tunability, and lower microwave loss, and these properties are very beneficial to the development of the microwave tunable devices application. Moreover, the effects of La₂O₃ doping on the dielectric and tunable properties of BST/MgO composites are investigated. The result shows that the La³⁺-doped sample has higher tunability and lower microwave loss than the undoped one.