Intrinsic carrier multiplication in layered Bi2O2Se avalanche photodiodes with gain bandwidth product exceeding 1 GHz

Emerging layered semiconductors present multiple advantages for optoelectronic technologies including high carrier mobilities, strong light-matter interactions, and tunable optical absorption and emission. Here, metal-semiconductor-metal avalanche photodiodes (APDs) are fabricated from Bi₂O₂Se crystals, which consist of electrostatically bound [Bi₂O₂]²⁺ and [Se]²⁻ layers. The resulting APDs possess an intrinsic carrier multiplication factor up to 400 at 7 K with a responsivity gain exceeding 3,000 A/W and bandwidth of ~ 400 kHz at a visible wavelength of 515.6 nm, ultimately resulting in a gain bandwidth product exceeding 1 GHz. Due to exceptionally low dark currents, Bi₂O₂Se APDs also yield high detectivities up to 4.6 × 10¹⁴ Jones. A systematic analysis of the photocurrent temperature and bias dependence reveals that the carrier multiplication process in Bi₂O₂Se APDs is consistent with a reverse biased Schottky diode model with a barrier height of ~ 44 meV, in contrast to the charge trapping extrinsic gain mechanism that dominates most layered semiconductor phototransistors. In this manner, layered Bi₂O₂Se APDs provide a unique platform that can be exploited in a diverse range of high-performance photodetector applications.

     

Protective Immunity against Listeria monocytogenes in Rats,Provided by HCl- and NaOH-Induced Listeria monocytogenes Bacterial Ghosts (LMGs) as Vaccine Candidates

Listeria monocytogenes (Lm) bacterial ghosts (LMGs) were produced by the minimum inhibitory concentration (MIC) of HCl, H₂SO₄, and NaOH. Acid and alkali effects on the LMGs were compared by in vitro and in vivo analyses. Scanning electron microscope showed that all chemicals form lysis pores on the Lm cell envelopes. Real-time qPCR revealed a complete absence of genomic DNA in HCl- and H₂SO₄-induced LMGs but not in NaOH-induced LMGs. HCl-, H₂SO₄- and NaOH-induced LMGs showed weaker or missing protein bands on SDS-PAGE gel when compared to wild-type Lm. Murine macrophages exposed to the HCl-induced LMGs showed higher cell viability than those exposed to NaOH-induced LMGs or wild-type Lm. The maximum level of cytokine expression (TNF-α, iNOS, IFN-γ, and IL-10 mRNA) was observed in the macrophages exposed to NaOH-induced LMGs, while that of IL-1β mRNA was observed in the macrophages exposed to HCl-induced LMGs. To investigate LMGs as a vaccine candidate, mice were divided into PBS buffer-injected, HCl- and NaOH-induced LMGs immunized groups. Mice vaccinated with HCl- and NOH-induced LMGs, respectively, significantly increased in specific IgG antibodies, bactericidal activities of serum, and CD4⁺ and CD8⁺ T-cell population. Antigenic Lm proteins reacted with antisera against HCl- and NOH-induced LMGs, respectively. Bacterial loads in HCl- and NaOH-induced LMGs immunized mice were significantly lower than PBS-injected mice after virulent Lm challenges. It suggested that vaccination with LMGs induces both humoral and cell-mediated immune responses and protects against virulent challenges.     

Experimental Investigation for Performance Study of Wire Electrochemical Spark Cutting of Silica Epoxy Nanocomposites

Purpose

Polymer Nanocomposites are advanced engineering composites with enhanced properties. These materials play a central role in various industrial sectors. The growing awareness of the key parameters (which influence the physical properties) with different combination of matrix-reinforcement, are making them more attractive in various applications. Machining of these materials is a challenging task for engineers with their properties (hardness and brittleness) due to various combinations of matrix-reinforcement. Therefore, the aim of present work is to investigate the machining behaviour of Silicon Dioxide (silica) Epoxy Nanocomposite due to straight cutting by using Wire Electrochemical Spark Cutting (WECSC) process.

Method

A specific number of experiments were conducted based on one parameter at-a-time approach to study the effect of influencing input parameters.

Result

The effect of various process parameters namely voltage supply, electrolyte concentration, wire velocity, pulse-on time and silica particle concentration (Cp) such as 3%, 4% and 5% (weight percent) on performance measures such as material removal rate (MRR) and surface roughness were demonstrated experimentally.

Conclusion

WECSC has been found effective technique for cutting of Silicon Dioxide Epoxy Nanocomposite. It is reported that MRR increases with decrease in silica particle concentration in Silicon Dioxide Epoxy Nanocomposite.

     

Influence of 2,6 (N-pyrazolyl)isonicotinic acid on the photovoltaic properties of a dye-sensitized solar cell fabricated using poly(vinylidene fluoride) blended with poly(ethylene oxide) polymer electrolyte

A novel method of introducing a synthesized organic nitrogenous compound 2,6 (N-pyrazolyl)isonicotinic acid (BNIN) and its effect on the conduction behavior of poly(vinylidene fluoride) (PVdF)–poly(ethylene oxide) (PEO) polymer-blend electrolyte with potassium iodide (KI) and iodine (I₂) and the corresponding performance of the dye-sensitized solar cells (DSSCs) were studied. A systematic investigation of the blends using FTIR provides evidence of interaction of BNIN with the polymer. Differential scanning calorimetry (DSC) study proves the miscibility of these polymers. Due to the coordinating and plasticizing effects of BNIN, the ionic conductivity of polymer blend electrolytes is enhanced. The efficiency of DSSC using BNIN doped polymer blend electrolyte was 7.3% under an illumination of 60 mW cm⁻² were observed for the best performance of a solar cell in this work.     

Sensitivity of Viscosity on Molten Ti Infusion into a B4C-Packed Bed at the Microscale

Metallurgical and Materials Transactions B - The effect of the surface tension–viscosity dissipation driving liquid Ti flow into a B4C packed bed was analyzed at 1941 K and 2573 K. The model...     

Filter Bank Channelizers for Multi-Standard Software Defined Radio Receivers

The ability to support multiple channels of different communication standards, in the available bandwidth, is of importance in modern software defined radio (SDR) receivers. An SDR receiver typically employs a channelizer to extract multiple narrowband channels from the received wideband signal using digital filter banks. Since the filter bank channelizer is placed immediately after the analog-to-digital converter (ADC), it must operate at the highest sampling rate in the digital front-end of the receiver. Therefore, computationally efficient low complexity architectures are required for the implementation of the channelizer. The compatibility of the filter bank with different communication standards requires dynamic reconfigurability. The design and realization of dynamically reconfigurable, low complexity filter banks for SDR receivers is a challenging task. This paper reviews some of the existing digital filter bank designs and investigates the potential of these filter banks for channelization in multi-standard SDR receivers. We also review two low complexity, reconfigurable filter bank architectures for SDR channelizers based respectively on the frequency response masking technique and a novel coefficient decimation technique, proposed by us recently. These filter bank architectures outperform existing ones in terms of both dynamic reconfigurability and complexity.     

Tunable Thermoelectric Performance in Porous Armchair Graphene Nanoribbons as a Function of Strain,Pore Morphology and Temperature

In this paper, the thermoelectric performance of porous armchair graphene nanoribbons under tensile and compressive strain is investigated as a function of pore morphology and temperature. For all the porous structures irrespective of their pore size, the performance improves at a compressive strain of 10%, while for tensile nature, the minimum cut-off strain required for improved thermoelectric figure of merit (ZT) shows an inverse relation with the pore size. In addition, optimal pore shape geometry can yield better performance, even at lower values of strain. Further analysis reveals that tensile strain is not able to improve the performance at low and intermediate temperatures of around 300 K, whereas tensile/compressive strain is effective in enhancing the performance of porous armchair graphene nanoribbons at higher temperatures. Furthermore, the structures are found to be more sensitive to compressive strain than the tensile one since the effect of compressive strain is found to improve ZT more significantly. Our analysis based on Non-Equilibrium Green’s function calculations suggests a possible route for tailoring the functionality of nanomaterials so as to achieve great potentials for thermoelectric applications at various temperatures.     

Room temperature response and enhanced hydrogen sensing in size selected Pd-C core-shell nanoparticles: Role of carbon shell and Pd-C interface

In the present work, the effect of carbon shell around size selected palladium (Pd) nanoparticles on hydrogen (H₂) sensing has been studied by investigating the sensing response of Pd-C core-shell nanoparticles having a fixed core size and different shell thickness. The H₂ sensing response of sensors based on Pd and Pd-C nanoparticles deposited on SiO₂ and graphene substrate has been measured over a temperature range of 25 °C–150 °C. It is observed that Pd-C nanoparticle sensor shows higher sensitivity with increase in shell thickness and faster response/recovery in comparison to that of Pd nanoparticle samples. Pd-C nanoparticles show room temperature H₂ sensitivity in contrast to Pd nanoparticles which respond only at higher temperatures. Role of carbon shell is also understood by investigating H₂ sensing properties of Pd and Pd-C nanoparticles on graphene substrates. These results show that higher catalytic activity and electronic interaction at Pd-C interface, a complete coverage and protection of Pd surface by carbon and presence of structural defects in nanoparticle core are important for room temperature and higher sensing response.     

Experimental Investigation and Simulation of Magnetic Flux Leakage from Metal Loss Defects

Journal of Failure Analysis and Prevention - Magnetic flux leakage (MFL) principle is widely used in detecting defects in cross-country pipelines. The tools based on the MFL techniques termed as...