Effect of Mg content on structural, electrical and optical properties of Zn1−xMgxO nanocomposite thin films

We report on the growth of Zn_1−xMg_xO (ZMO) thin films on quartz substrate using pulsed laser deposition (PLD) technique. The influence of varying Mg composition on structural, electrical and optical properties of ZMO films has been systematically investigated. Increase in Mg content (in the range 0.0?x?1.0), reflects the structural phase transition from wurtzite via mixed phase region to cubic one. X-ray diffraction (XRD) studies indicate the hexagonal wurtzite phase at Mg composition ranging from 0% to 30%; mixture of wurtzite and cubic phases for 40% and single cubic phase at Mg content greater than 50%. The variation of the cation-anion bond length to Mg content shows that the lattice constant of the hexagonal ZMO decreases with corresponding increase in Mg content, which result in the structure gradually deviating from the wurtzite structure. The optical measurements reveal a blue shift in absorption edge and increase in transmittance from 75% to 96% with increase in Mg content. Tuning of the band gap has been obtained from 3.41 to 6.58 eV with corresponding increase in Mg content from x=0.0 to 1.0, which demonstrates that the films are useful for window layer of solar cells that improve the overall efficiency by decreasing the absorption loss.     

Novel Approach for Pre-distributing Keys in WSNs for Linear Infrastructure

Wireless Personal Communications - There is a set of applications in wireless sensor networks that forms a particular topology through specific placements of sensor nodes. This set is known as...     

Synthesis of ethyl propionate catalyzed by poly(N‐AEAAm‐co‐AAc)‐cl‐MBAm hydrogel‐immobilized lipase of Bacillus coagulans MTCC‐6375

A purified alkaline thermotolerant bacterial lipase of Bacillus coagulans MTCC‐6375 was efficiently immobilized onto poly(N‐AEAAm‐co‐AAc‐cl‐MBAm)‐hydrogel at pH 8.5 and at temperature 55°C in 16 h. The hydrogel‐bound matrix possessed 1.04 U/g (matrix) lipase activity with a specific activity of 1.8 U/mg of protein. The immobilized lipase resulted in formation of 52.5 mM of ethyl propionate (52% conversion) at 55°C in 9 h in n‐nonane. Ethanol and propionic acid when used in a ratio of 300 : 100 mM, respectively, in n‐nonane along with 10 mg of hydrogel‐bound lipase resulted in optimal synthesis of ethyl propionate (82.5 mM). Addition of molecular sieves (3 Å, 0.7 g/reaction volume) further enhanced the conversion rate to 82.4% resulting in 83.5 mM of ethyl propionate. Incubation temperature below or above 55°C had a marked effect on the synthesis of ethyl propionate. However, esterification performed in n‐heptane at 65°C resulted in 87.5 mM of ethyl propionate with a conversation rate of 89.3%. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Model development and validation: Co-combustion of residual char, gases and volatile fuels in the fast fluidized combustion chamber of a dual fluidized bed biomass gasifier

A one-dimensional steady state model has been developed for the combustion reactor of a dual fluidized bed biomass steam gasification system. The combustion reactor is operated as fast fluidized bed (riser) with staged air introduction (bottom, primary and secondary air). The main fuel i.e., residual biomass char (from the gasifier), is introduced together with the circulating bed material at the bottom of the riser. The riser is divided into two zones: bottom zone (modelled according to modified two phase theory) and upper zone (modelled with core-annulus approach). The model consists of sub-model for bed hydrodynamic, conversion and conservation. Biomass char is assumed to be a homogeneous matrix of C, H and O and is modelled as partially volatile fuel. The exit gas composition and the temperature profile predicted by the model are in good agreement with the measured value.     

UBET-based numerical modeling of bulk deformation processes

The paper summarizes the development of numerical procedures for modeling bulk deformation process and preform designing techniques based on the upper bound elemental technique (UBET). UBET has a unique place where an approximate, but faster solution is needed for decision making. In designing and optimizing multistage forging and profile ring-rolling processes, an approximate solution can be used to identify the most influential process parameters. Once an optimum combination of process conditions are determined, computationally intensive, but more accurate finite element analysis can be used to verify and refine results. In this paper, UBET procedures for closed-die forging and profile ring rolling are high-lighted. Experimental investigations are used to validate the model predictions. Also, the UBET-based preform design tool is presented as a process and die design tool for multistage forging processes. Application of these techniques is presented with evidence of effective material usage and extended overall die-life.     

Methacrylic acid and dodecyl methacrylate (MAc‐DMA) hydrogel for enhanced catalytic activity of lipase of Bacillus coagulans MTCC‐6375

An alkaline thermotolerant bacterial lipase of Bacillus coagulans MTCC‐6375 was purified and immobilized on a methacrylic acid and dodecyl methacrylate (MAc‐DMA) hydrogel. The lipase was optimally bound to the matrix after 20 min of incubation at 55°C and pH 9 under shaking conditions. The matrix‐bound lipase retained approximately 50% of its initial activity at 70–80°C after 3 h of incubation. The immobilized lipase was highly active on medium chain length p‐nitrophenyl acyl ester (C: 8, p‐nitrophenyl caprylate) than other p‐nitrophenyl acyl esters. The presence of Fe³⁺, NH₄⁺, K⁺, and Zn²⁺ ions at 1 mM concentration in the reaction mixture resulted in a profound increase in the activity of immobilized lipase. Most of the detergents partially reduced the activity of the immobilized lipase. The immobilized lipase performed ～62% conversion in 12 h at temperature 55°C. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 1420–1426, 2006     

Experimental investigation on optimization of invert trap configuration for sewer solid management

Invert traps have been successfully used to collect sediments at convenient locations within the sewer network, where large volumes of solids can be stored. In the present study, experiments have been performed in 15 cm wide and 5 m long channel for the measurement of retention ratios of five different invert trap configurations (namely, rectangular, trapezoidal with one side vertical, trapezoidal, trapezoidal with rectangular base, rectangular with trapezoidal base) having top width of 32 cm and depth of 28 cm with slots of three different sizes (namely, 5, 9 and 15 cm) for the flow of seven different sediment types (namely, two types of sand, glass beads and four types of plastic beads) at different flow rates for each trap. The flow rates selected in present study cover entire range of flow rate expected in channels during dry weather flow and monsoon. Flow field and retention ratio predictions for each invert trap configuration have been carried out using CFD modeling with the help of FLUENT software using Renormalization Group (RNG) k–ε along with Discrete Phase Model (DPM). The simulation results are capable of showing particle trajectories, the effect of flow rate and trap geometry on the flow patterns, developed within the trap. Based on CFD modeling and experimental measurements, it is concluded that the invert trap having rectangular shape with trapezoidal base is the most efficient trap configuration with highest sediment retention ratio.