Effect of Conditions of High-Temperature Treatment on the Structure and Tribological Properties of Nickel-Based Laser-Clad Coating

Russian Journal of Non-Ferrous Metals - Laser cladding, which is characterized by the minimal thermal impact on the substrate, is an advanced technique to restore the working dimensions of parts...     

Microdistortions,Hardness, and Young’s Modulus of Multicomponent Bcc Solid Solutions

Powder Metallurgy and Metal Ceramics - The phase composition, type II microstresses, and coherent scattering domains (CSDs) of multicomponent (medium- and high-entropy) bcc solid solutions with an...     

The Influence of Hydrogen Concentration in an Ar–H2 Mixture on the Electrical Properties of Solid Oxide Fuel Cells

Powder Metallurgy and Metal Ceramics - Fuel cells are today among the most efficient and environmentally friendly devices for the production of electricity. They are developing rapidly and are...     

Lead and cadmium in teeth,bone and kidneys of rats with a standard Pb‐Cd supply

Male Wistar rats received a combination of 25 ppm PbCl₂ and 5 ppm CdCl₂ in drinking water at different developmental stages. Pb and Cd levels of incisors, molars, epiphyses, diaphyses and kidney cortex were recorded by atomic absorption spectrophotometry. The results confirmed that Pb has an affinity for hard tissue and especially to teeth, but it also accumulated in soft tissues under the above conditions. In addition, the results indicated none or only a moderate placental or mammary barrier for Pb, and suggested a high absorption of lead from the intestine of sucklings. The results also confirmed that kidney cortex is a primary target for Cd, and indicated that Cd has crossed the placental and mammary barriers to some degree. The positive significant correlation between Cd levels in molars and kidney cortex suggested that rodent molars indicate a degree of Cd absorption, whereas incisors do not. It is supposed that rodent molars are comparable to human deciduous teeth. It is thus confirmed that human deciduous teeth indicate previous lead exposure. It is further inferred that they also can be used as indicators of previous Cd‐exposures.     

Removal of Lissamine Red From Wastewater Using Waste Materials

Feasibility of a waste material, flyash, as a material for purification of wastewater containing Lissamine Red has been studied. Effects of time and concentration, temperature and pH on the removal of the dye have been studied. Lower concentrations favour the uptake of dye from water and the maximum removal was observed at a dye concentration of 20 mgL m 1 , 30°C, pH of 7 and adsorbent particle size of 53 µm. Dynamics of the uptake was studied using Lagergren's equation. The mass transfer coefficient was found to be 0.05 cmmin m 1 at a concentration of 20 mgL m 1 , 30°C and 53 µm particle size.     

Environmental studies on impacts of dredging

The coastal zone acts as a major interface between the ocean and continents. Harbours located in this zone face grave problems from sedimentation, which is a global issue for most of the harbours of the world. Dredging which counter acts sedimentation, brings about innumerable environmental impacts — both positive and negative. As a case study, this paper reports the impacts of dredging conducted at Cochin harbour which is the second largest port along the west coast of India; this port is a nodal center in trade and commerce connecting south east Asia to European sector. The harbour operation mainly depends on maintenance form of dredging bringing about impacts which have both direct and indirect effects in the long term. The important parameters selected for this study are salinity, current, extinction coefficient, turbidity, nutrients, chlorophyll and bottom fauna. An assessment is made on both positive and negative impacts which indicate rise in turbidity, changes in nutrient content and biota. The current practice on dredging is conducive to harbour operations, regulating the material made available to the near shore areas and highlights the possible venues for utilization of spoil for reclamation of land and wetland development. A flow chart identifies the areas vulnerable to impacts arising out of dredging and its consequential environmental issues.     

Hydrocarbon stress response of four tropical plants in weathered crude oil contaminated soil in microcosms

Responses to hydrocarbon stress of four tropical plants Panicum maximum, Zea mays, Centrosema sp. and Pueraria sp. grown in crude oil contaminated soils (1%, 5% and 10% w/w) were evaluated in a green house. Plants’ percentage survival, shoot heights, biomass development, and phytotoxicity susceptibility were used as indicators of growth, stress response and hydrocarbon tolerance. Relative to control, shoot heights and biomass of plants reduced with increasing hydrocarbon concentration, but 1% w/w oil-in-soil, stimulated shoot heights (5.9% and 6.4%) and weights (21.9% and 2.3%) in P. maximum and Centrosema sp. respectively. P. maximum tolerated the contaminant stress with biomass yields of 113% and 57% of control respectively in 1% and 10% w/w oil-in-soil. All the plants had 100% survival in 1% w/w, but considerably reduced survival in 10% w/w oil-in-soil. These results show that P. maximum has great potential for phytoremediation of petroleum contaminated soil.     

Development of a continuous respirometer

A continuous oxygen uptake meter or continuous respirometer was developed which produced a rapid and reliable response to systemic shocks. The respirometer basically is a 101. Plexiglas laboratory activated sludge unit with a variable volume air tight side car. The feed enters the completely mixed aeration basin and is pumped into the side car. The side car is the site of the oxygen uptake measurements as indicated by a continuously monitoring dissolved oxygen probe. The system was most sensitive to changes in influent concentrations when run at an F/M = 0.1. Response time for a change in DO of 0.1 ppm was less than 4 min. The continuous respirometer was tested employing both synthetic and raw industrial wastes.     

The Options Available for Ammonia Removal at Davyhulme Sewage-Treatment Works

Davyhulme sewage-treatment works, which serves the Manchester drainage area, is one of the lagest in the UK. The dry-weather flow is 300 000 m³/d, and the plant receives a wide range of industrial effluents. The works has been identified as a major source of pollution in the Mersey estuary, with an average discharge of 6500 kg ammonia/day. As part of its initiative to improve the Mersey estuary, North West Water intends to reduce the daily ammonia load from Davyhulme to about 1000 kg/d by 1995. In order to assess the capabilities of both conventional and novel processes to achieve this degree of ammonia removal, a number of on-site pilot plants were established. This paper reports on the pilot-plant studies and the selection of process options. Recommendations with regard to design parameters and final process selection are given.     

Modification of Polycaproamide Composites Based on 1H,1H,13H-rihydroperfluorotridecan-1-ol and Montmorillonite

Fibre Chemistry - Modification of polycaproamide by 1H,1H,13H-trihydroperfluorotridecan-1-ol immobilized on montmorillonite produced an F-containing polymer composite. The structure of the...