Laser irradiation of oligosiloxane copolymer thin films functionalized with side chain bulky carbosilane moieties

Linear oligosiloxanes functionalized with bulky side chain tris(trimethylsilyl)hexyl (TTSH) substituents were transformed into cross-linked materials by UV 193 nm excimer pulsed laser ablation. The process occurred without any catalyst, by reactions of radicals formed in UV laser induced photolysis of side tris(trimethylsilyl)hexyl groups. Chemical changes were monitored by FTIR, LC/UV, GC/MS and solubility tests.     

Preparation of Phase-Pure M1 MoVTeNb Oxide Catalysts by Hydrothermal Synthesis—Influence of Reaction Parameters on Structure and Morphology

This work presents a detailed investigation of the preparation of MoVTeNbO _x catalysts by hydrothermal synthesis. Phase-pure synthesis of M1 has been achieved applying the metals in a molar ratio Mo/V/Te/Nb = 1/0.25/0.23/0.12. Raman, UV/Vis spectroscopy, and SEM/EDX analysis show that the elements are inhomogeneously distributed in the initial suspension that is formed after mixing the metal salts in an aqueous medium. Iso- and heteropoly anions of molybdenum, free telluric acid as well as supra-molecular polyoxometalate clusters are observed in the solution, whereas all metals have been found in the precipitate. Complete rearrangement of molecular building blocks under hydrothermal conditions is essential for formation of phase-pure materials. Optimized synthesis conditions with respect to temperature and time result in the formation of a precursor consisting of nano-structured M1 characterized by an extended periodic organization in the [001] direction and a fairly homogeneous distribution of the elements. Residual ammonium containing supra-molecular species in the precursor result in the formation of phase mixtures during the subsequent crystallization by heat treatment in inert gas. Phase-pure M1 exhibits a distinct degree of flexibility with respect to the chemical composition that becomes obvious by incorporating Nb not exclusively into pentagonal bi-pyramidal units, but also into octahedral coordinated positions as shown by EXAFS. Anisotropic growth of the needle-like M1 crystals has been observed during the final heat treatment performed at 873–923 K in inert atmosphere disclosing a potential method to control the catalytic properties of MoVTeNbO _x catalysts.     

Linear and nonlinear methods for brain-computer interfaces

At the recent Second International Meeting on Brain-Computer Interfaces (BCIs) held in June 2002 in Rensselaerville, NY, a formal debate was held on the pros and cons of linear and nonlinear methods in BCI research. Specific examples applying EEG data sets to linear and nonlinear methods are given and an overview of the various pros and cons of each approach is summarized. Overall, it was agreed that simplicity is generally best and, therefore, the use of linear methods is recommended wherever possible. It was also agreed that nonlinear methods in some applications can provide better results, particularly with complex and/or other very large data sets.     

Development of an end-point detector for parylene deposition process

Parylene is an emerging material for MEMS. It is an organic material that is grown by using the chemical vapor deposition method at room temperature. The deposition thickness is commonly controlled by the amount of solid-phase dimer loaded in a sublimation chamber. In a conventional deposition machine, the end point of the process is designated by the moment the dimer is exhausted. However, this end-of-process criterion does not offer precise, repeatable control of film thickness. We present the results of the development of an in situ end-point detector for a Parylene chemical vapor deposition process. The detector is based on the thermal transfer principle and can be implemented on commercial parylene deposition systems with minimal system modification. Such a sensor enables a user to stop the deposition when a targeted thickness is reached. The end point detector is very simple to implement on existing parylene deposition systems. A series of such sensors with different target deposition thickness would allow extraction of the actual deposition rate within a deposition run.     

A 100-GOPS programmable processor for vehicle vision systems

New generations of automobiles will include driver assistance systems requiring powerful, low-cost processors to handle video/camera applications and to enable fast, convenient application development. Shrinking feature sizes on processors already in development will bring substantial increases in system speed and functionality.     

Performance study of linear and nonlinear diversity-combining techniques in synchronous FFH/MA communication systems over fading channels

Based on the Fourier-Bessel series and exponential characteristic function approach, the paper presents analytical bit-error-rate expressions for synchronous fast frequency-hopped spread-spectrum multiple-access systems over Rician fading channels with M-ary frequency-shift-keying modulation. Linear-combining, product-combining and clipper receivers are studied. Numerical results show that both the clipper and product-combining receivers perform significantly better than the linear-combining receiver. The clipper receiver with an optimum threshold level slightly outperforms the product-combining receiver. However, the product-combining receiver is the preferred diversity-combining method because it is completely nonparametric. In addition, the optimum diversity levels for various diversity-combining receivers over Rayleigh fading channels are higher than that of the Rician fading channels     

Runtime verification and monitoring of embedded systems

Ensuring the correctness of software applications is a difficult task. The area of runtime verification, which combines the approaches of formal verification and testing, offers a practical but limited solution that can help in finding many errors in software. Runtime verification relies upon tools for monitoring software execution. There are particular difficulties with regard to monitoring embedded systems. The concerns for arranging non-intrusive monitoring of embedded systems in a way that is suitable for use in runtime verification methods are considered here. A number of existing runtime verification tools are referenced, highlighting their requirement for monitoring solutions. Established and emerging approaches for the monitoring of software execution using execution monitors are reviewed, with an emphasis on the approaches that are best suited for use with embedded systems. A suggested solution for non-intrusive monitoring of embedded systems is presented. The conclusions summarise the possibilities for arranging non-intrusive monitoring of embedded systems, and the potential for runtime verification to utilise such monitoring approaches.     

Mycological survey for potential aflatoxin and ochratoxin producers and their toxicological properties in harvested Brazilian black pepper.

A mycological survey was carried out on 115 samples of whole dried black pepper seeds, from two main production regions of Brazil (Pará and Espírito Santo). A high incidence of contamination was verified in both regions when 99.1% of the samples showed filamentous fungi contamination. A total of 497 species of nine different genera were isolated (Aspergillus, Eurotium, Rhizopus, Penicillium, Curvularia, Cladosporium, Absidia, Emericella and Paecilomyces). The genus Aspergillus was the predominant (53.5%) followed by species from the Eurotium genus (24.5%). Eurotium chevalieri (16.4%) was the most predominant species followed by A. flavus (14.6%) present on 55 samples of black pepper (47.8%) analysed. Twenty-five samples (21.7%) were contaminated with aflatoxigenic strains of A. flavus and A. parasiticus. In relation to the types of aflatoxins produced by mycotoxigenic strains, it was observed that 25 strains (44.6%) of 56 isolated of A. flavus produced aflatoxins. From 12 samples, A. ochraceus species were isolated in low frequency (3.5%). Two strains of A. ochraceus from 16 isolated were producers of ochratoxin A. With respect to the aflatoxins and ochratoxin A natural contamination, none of the samples presented detectable levels of these mycotoxins using thin-layer chromatographic analysis.