A steady-state model for the rotating biological disc reactor

A steady-state model for substrate removal in a rotating biological disc reactor is presented. The model considers the consumption of substrate by micro-organisms in the biofilm attached to the rotating disc, and mass transfer from the attached liquid film to the biofilm. A mass balance on substrate over the liquid in the trough provides an expression for effluent substrate in terms of the microbial kinetic constants, the geometry of the system and the operating conditions. In order to simplify the solution of the equations in the model, first order kinetics are assumed for the rate of microbial growth and substrate utilization. This simplified model can be solved, for example, by using a programmable calculator. The model predicts that the fractional removal of substrate per stage is strongly dependent on the hydraulic loading rate per unit disc area but independent of feed substrate concentration. It predicts constant removal independent of disc size provided the hydraulic loading per unit area is kept constant. The rotational speed has only a slight predicted effect on the rate of substrate removal. The predictions of the model are compared with published data from the literature for both domestic wastewater and some industrial wastes. Trends observed in the field are predicted qualitatively by the model.     

Continuous monitoring of short term dissolved oxygen and algal dynamics

Dissolved oxygen (DO) in coastal bays with frequent algal blooms can undergo significant diurnal changes. Short-term DO and algal dynamics in a sub-tropical, nitrogen-limited, marine ecosystem are studied by means of a specially designed telemetry system. The high resolution data show clearly the importance of the vertical DO structure, and its relationship with environmental variables (solar radiation, water temperature, wind, tidal current) and phytoplankton dynamics. The design, instrumentation and calibration, and operational experience of the system are described. The simple and robust system has proved useful in (i) providing continuous data for full testing of water quality models, and (ii) the planning of field experiments to study algal dynamics.     

Indirect check of aggregate pore effects on concrete

It is very difficult to quantify aggregate pores directly in a way that allows pore/water interaction to be accurately related to hardened concrete properties. This work examines, a number of aggregates through water absorption checks and gives results of tests on some concretes made with them. Three especially relevant concrete properties are examined, initial surface absorption, freeze/thaw behaviour and drying shrinkage; it is shown that aggregate absorption is reflected in these properties.     

Effect of chlorination practice on soluble organics

As the practice of chlorination for the disinfection of waste effluents is apparently to be extended, this study was initiated to examine the possibility that chlorinated organics could be formed in the disinfection process. A group of pure compounds that had been demonstrated to be susceptible to chlorination were examined under conditions likely to apply under normal disinfection practice.From the results obtained, it appears only organics with ring structures and electron activating substituents, or amino groupings are capable of chlorination. The frequent presence of ammonia or amino groups means that chloramine formation with its asociated toxicity is likely. However, the presence of ammonia or amino groups will retard the reaction with other compounds making chlorination of these unlikely.     

Conceptual aspects of water re-use

A simplified model of a municipal water recycle system is presented and gives a clear picture of the relationship between process variables such as the intensity of the treatment, the accumulation of pollutants and the number of times the water is re-used. The model can be used to determine the necessary requirements for the treatment process in order to reach a certain desired drinking water quality. This model is extended to cover a variety of practical conditions. It is also shown that accumulation under practical conditions is limited, even if there is no treatment. The model predicts that the recycle system can utilise a low quality supplementary supply, e.g. brackish water. Although the model is derived for a recycle system for domestic water supply it can be used for any closed loop water system.     

Lead in glasgow street dirt and soul

The levels of lead in city street dirt and in soil from various locations in Glasgow were investigated during spring 1976. Lead concentrations in street dirt ranged from 150–2300 ppm, mean 960 ppm, and were significantly elevated with respect to the observed “natural” level of 78 ppm. Lead derived from anti-knock compounds in petrol and introduced to the environment via automobile exhausts was clearly implicated as the main source of lead pollution in a series of soil lead measurements at the centre and periphery of eight Glasgow parks.Various chemical leaching techniques were employed and compared. Less than 5% of street dirt and soil lead was found to be associated with the organic phase.     

Assessment of nitrification in groundwater filters for drinking water production by qPCR and activity measurement

In groundwater treatment for drinking water production, the causes of nitrification problems and the effectiveness of process optimization in rapid sand filters are often not clear. To assess both issues, the performance of a full-scale groundwater filter with nitrification problems and another filter with complete nitrification and pretreatment by subsurface aeration was monitored over nine months. Quantitative real-time polymerase chain reaction (qPCR) targeting the amoA gene of bacteria and archaea and activity measurements of ammonia oxidation were used to regularly evaluate water and filter sand samples. Results demonstrated that subsurface aeration stimulated the growth of ammonia-oxidizing prokaryotes (AOP) in the aquifer. Cell balances, using qPCR counts of AOP for each filter, showed that the inoculated AOP numbers from the aquifer were marginal compared with AOP numbers detected in the filter. Excessive washout of AOP was not observed and did not cause the nitrification problems. Ammonia-oxidizing archaea grew in both filters, but only in low numbers compared to bacteria. The cell-specific nitrification rate in the sand and backwash water samples was high for the subsurface aerated filter, but systematically much lower for the filter with nitrification problems. From this, we conclude that incomplete nitrification was caused by nutrient limitation.     

Toxicity, accumulation and elimination studies of α-hexachlorocyclohexane (α-HCH) with freshwater organisms of different trophic levels

A short- and long-term toxicity study with α-hexachlorocyclohexane (α-HCH) was carried out with freshwater organisms of different trophic levels (algae, crustaceae and fishes). In this study mortality, immobilization, growth, reproduction, histopathologic changes and enzyme activities were chosen as criteria.Furthermore accumulation and elimination processes were investigated in separate organisms as well as the uptake of α-HCH by one organism and through a food-chain.Finally a tentative method for deriving an “ecological limit” for χ-HCH in surface water is described.     

The relative influence of wind,sunlight and temperature on user comfort in urban outdoor spaces

This paper presents the development of a comfort index that measures adaptivity in outdoor spaces. Over a 9-month period 649 people were surveyed in three locations, in temperatures between 10 and 28 °C. An exploratory factor analysis develops a 15-item scale of comfort that includes measures of adaptivity: clothing, exposure time and seating location. The scale is regressed on physical measures: average instantaneous wind speed; maximum wind speed; mean-exposed radiant temperature; mean-shaded radiant temperature and ambient temperature. The results model the relative contributions of the microclimatic factors for the comfort in the outdoor space. Analyses suggest gustiness and wind speed are most important in determining user satisfaction. There is strong support for the theory that people actively adapt to microclimatic conditions.