排队等待区行人服务水平评价方法

通过行人问卷调查分析了排队等待区行人主观感受和等待区的设备条件、交通条件等因素之间的关系,利用数理统计方法确定了等待区行人服务水平评价的指标体系.提出了排队等待区行人服务水平模糊综合评价方法.通过实例验证了评价方法的有效性.     

仓式静态连续好氧堆肥发酵工艺的水气研究

采用仓式静态连续好氧堆肥发酵工艺,通过建立水平衡体系,系统地研究了水分对整个发酵工艺的影响,得出了仓式静态连续好氧堆肥发酵具有工艺简便,热交换快,水气蒸发量大等特点;好氧堆肥发酵过程中发酵温度保持在65℃左右,含水量控制在45%～55%有利于有机物降解,垃圾堆肥可在40～50d腐熟;静态连续好氧一次堆肥发酵物料的含水量需控制在35%以下,机械自动分选(类)筛分效率高,筛分率在90%～95%,垃圾减容在50%～60%.二次堆肥发酵物料的含水量需控制在25%～30%,机械除杂(碎石、碎玻璃等)效果好,有机肥中杂质含量低于0.8%.静态好氧二次堆肥发酵可以用垃圾渗沥水补充水分,达到资源循环再利用,可实现污水零排放.     

Synthesis and characterization of soluble aromatic azopolyamides containing sulfone and ether units

A series of new polyamides 3a–d containing aryl-azo, ether and sulfone groups in the main chain were synthesized from bis[4-(4-aminophenoxy)phenyl sulfone] 1 and several azo aromatic diacyl chlorides 2a–d by the low temperature solution polycondensation technique. FTIR spectroscopy, nuclear magnetic resonance (NMR) and elemental analyses confirmed the structure of these polymers. Owing to the aryl and amide groups in the main chain, these polymers exhibit photochromic properties as well as excellent thermal stabilities. The transition temperatures (T _g) are between 242 and 265 °C, and the char yields at 800 °C in nitrogen atmosphere were above 39%. Based on incorporation of flexible ether linkages and polar sulfone groups, the polyamides show desirable solubility in organic solvents such as DMAc, N,N-dimethylformamide (DMF), N-methyl-2-pyrroidinone (NMP) and dimethylsulfoxide (DMSO). And it is exemplified that polyamide containing 2 and 2′ substitutes performed better solubility. Funded by the National Natural Science Foundation of China (No. 50572081)     

A Reconfigurable Manufacturing System for In-site Machining Component with Large Scale

To cope with various unpredictable changes in large scale parts,the concept of reconfigurable manufacturing system (RMS) for machining these components is presented.Considering with large-size space measurement and the fixed-free manufacture mode,an automatically localizing machining method for large scale part is studied in this paper,and the architecture of the RMS for machining large scale parts is proposed.According to the method and structure,the automatically localizing model is established.The theoretical analysis and simulation examples demonstrate the feasibility and validity of the proposed method,and the results indicate that the method is suitable and effective for machining large scale components in significant scientific projects.     

纳米碳管的非线性热电传输

利用Landauer-Büttiker公式对金属导线/单臂纳米碳管/金属导线结构的热电传输进行理论计算.在有限温度梯度下,利用迭代法计算非线性热电势和热电导,研究表明,热电势和热电导与系统电子的传输行为密切相关,热电势随系统化学势的变化而振荡,且可为正也可为负值,这种行为完全依赖于电子电导的变化.研究结果对分子器件热传输的实际应用有意义.     

Effect of Cooling Rate on the Solidification Behavior and Microstructure of SiC_w/Al-18Si Composites

Al-18Si alloy reinforced with 15%,20% and 25%(volume fraction) SiC whiskers were prepared by squeeze casting technique and the solidification behavior and microstructure of as-prepared composites at different cooling rates were studied by DSC,optical microscope,SEM and TEM.The results show that silicon phase is nucleated on SiC whiskers.With the increase of cooling rate,the degree of undercooling increases in the composites as well as in the alloys.The increase of cooling rate leads to a reduction in the size of eutectic Al-Si and also changes its morphology from short stick to equiaxed.However,the change of primary Si is complex.The primary Si size is refined,and then coarsened with increasing cooling rate.The primary Si morphology of composites changes from agglomerate to stick.     

The Construction of Heparin Sulfate-collagen Protein Based Scaffolds and Its Effects on the Neural Stem Cells

The objective of this study was to construct the heparin sulfate-collagen pro-tein-based scaffolds and to explore its effects on the proliferation and differentiation abilities of neural stem cells(NSCs).The heparin sulfate-collagen protein-based scaffolds were produced by injection molding/freezing/cross-linking technique.The proliferation ability was detected by MTT and the dif-ferentiation ability was detected by immunofluorescence technique.The results indicate that the heparin sulfate-collagen protein-based scaffolds with porous and longitudinal parallel structures are successfully constructed.The NSCs grow well in the pores of scaffold and still maintain the prolif-eration and differentiation abilities.It is concluded that the scaffolds possess stable porous and longi-tudinal parallel structures and great biocompatibility to NSCs.The combination of scaffold and NSCs may suggest a possible treatment strategy for spinal cord injury     

三维地形可视域分析的显示技术

为了使可视域分析结果在3D GIS中显示以方便用户使用,探讨了在规则DEM数据基础上三维地形的显示手段,分析了观察点的拾取、可视域的分析及结果显示的方法.其中观察点的获取采用Java3D拾取技术;可视域分析采用参考面法得到可视点;分析结果显示是按照地形的起伏、在地形上方以半透明的方式来显示可视区域.仿真结果表明,这种方法对可视域分析结果描述准确,且对原地形的显示效果和交互操作影响较小.     

基于多特征融合的运动物体识别方法研究

为了实现运动目标的实时检测,本文基于多特征融合,提出了一种运动物体分级识别方法.首先通过对运动目标的分割,分析得到各个物体的形状矩特征、面积大小及运动速度.对上述特征,采用支持向量机方法对其矩特征进行快速的一级分类,然后对一级分类结果及各物体的面积、速度等信源根据其对分类的重要程度,采用模糊积分技术进行多特征融合分类.实验表明,本方法具有较强的学习能力及较高的识别精度,可有效地应用于道路监控等系统.     

PCNN模型在彩色图像分割中的应用

针对脉冲耦合神经网络(PCNN)模型主要应用于灰度图像处理的局限性,利用脉冲发生器将颜色信息引入模型作为输入,与灰度信息共同控制神经元的内部行为,控制等灰度值的不同颜色区域分期点火,实现彩色图像的精确分割.双输入PCNN模型实现了彩色图像的分割,同时保持了PCNN模型对噪声的鲁棒性,从简单的仿真图像和实际图像两方面验证了此分割方法的有效性.