卧式加工中心试验模态分析

应用变时基采样的锤击法对卧式加工中心进行了试验模态分析，研究了该加工中心的动态特性，获得了感兴趣低频段的加工中心低阶固有频率。通过对整机各阶模态振型的分析，找到了加工中心结构的薄弱环节，为进行结构的优化设计指出了改进的方向。     

国内外不锈钢精炼剂研究发展现状

分析了精炼剂组元元素的作用能力，讨论并总结了精炼剂组元的复合作用，介绍了几种国内、国外精炼剂产品，提出发展高效复合精炼剂的想法。     

Preparation and characterization of GaN films grown on Ga-diffused Si （111） substrates

Hexagonal GaN films were prepared by nitriding Ga2O3 films with flowing ammonia. Ga2O3 films were deposited on Ga-diffused Si (111) substrates by radio frequency (r.f.) magnetron sputtering. This paper have investigated the change of structural properties of GaN films nitrided in NH3 atmosphere at the temperatures of 850, 900, and 950℃ for 15 min and nitrided at the temperature of 900℃ for 10, 15, and 20 rain, respectively. X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and X-ray photoelectron spectroscopy (XPS) were used to analyze the structure, surface morphology and composition of synthesized samples. The results reveal that the as-grown films are polycrystalline GaN with hexagonal wurtzite structure and GaN films with the highest crystal quality can be obtained when nitrided at 900℃ for 15 min.     

高钒高速钢碳化钒形态的数值化分析

针对碳化钒的不同形态,设计出定量分析软件,并利用形状因子K,实现了高钒高速钢不同碳化物形态数值化处理,当K介于0.785～1.000之间碳化钒形态为团球状;K≤0.223,碳化钒呈开花状.高钒高速钢当碳含量达到4.2%时,K为0.86和当量直径D为0.78μm,碳化物呈团球状均匀分布.     

逆变电源的可靠性及其提高途径

影响逆变焊接电源可靠性的因素是多方面的.如产品的设计和生产等各个环节.根据实践经验提出了解决可靠性问题的一些有效途径和方法.     

探究用电检查管理中营配信息集成的重要作用

随着我国经济和科学技术的不断发展,用电检查也应从传统的实地管理模式转为自动化、信息化的管理模式。详细阐述、分析了营配信息集成在用电检查工作中的作用。     

Recover Fault Services via Complex Service-to-Node Mappings in Wireless Sensor Networks

With the motivation of seamlessly extending wireless sensor networks to the external environment, service-oriented architecture comes up as a promising solution. However, as sensor nodes are failure prone, this consequently renders the whole wireless sensor network to seriously faulty. When a particular node is faulty, the service on it should be migrated into those substitute sensor nodes that are in a normal status. Currently, two kinds of approaches exist to identify the substitute sensor nodes: the most common approach is to prepare redundancy nodes, though the involved tasks such as maintaining redundancy nodes, i.e., relocating the new node, lead to an extra burden on the wireless sensor networks. More recently, other approaches without using redundancy nodes are emerging, and they merely select the substitute nodes in a sensor node’s perspective i.e., migrating the service of faulty node to it’s nearest sensor node, though usually neglecting the requirements of the application level. Even a few work consider the need of the application level, they perform at packets granularity and don’t fit well at service granularity. In this paper, we aim to remove these limitations in the wireless sensor network with the service-oriented architecture. Instead of deploying redundancy nodes, the proposed mechanism replaces the faulty sensor node with consideration of the similarity on the application level, as well as on the sensor level. On the application level, we apply the Bloom Filter for its high efficiency and low space costs. While on the sensor level, we design an objective solution via the coefficient of a variation as an evaluation for choosing the substitute on the sensor level.     

“不择手段”——艺术设计基础课教学形式的多样化探索

教学是一个动态的过程,艺术设计的基础课教学更是如此,需要教师不断地更新适应时代发展的教学理念,在教学过程中更要"不择手段",探索丰富多样的教学形式。文章论述了在教学过程中对教学形式多样化的研究与实践,主要包括教学过程、学生作业形式、教学地点三个方面,以及对"基础"这一概念的再诠释。     

用于腺苷检测的基于级联扩增核酸适体电化学传感界面的构建研究

该文报道了一种基于酶级联扩增的电化学核酸适体检测腺苷的新方法。当腺苷存在时,滚环扩增的引物通过E.coli DNA连接酶的作用与通过巯基组装在金电极上的固定探针连接。在pHi29 DNA聚合酶的作用下,滚环扩增反应进行并产生一条与环形探针完全互补的长的单链,然后将大量金纳米粒子标记的核酸探针与滚环扩增的产物杂交。该传感界面电化学行为的结果表明,通过酶级联扩增的方法提高了检测腺苷的阻抗响应灵敏度,且选择性和重现性良好。用于腺苷的检测时,其线性范围为2.0μmol/L~100μmol/L,最低检测浓度为2.0μmol/L,表明该传感界面的设计可作为一种通用方法而有望用于其它目标物的检测。     

An empirical molecular docking study of a di-iron binding protein with iron ions

Various molecular docking software packages are available for modeling interactions between small molecules and proteins.However,there have been few reports of modeling the interactions between metal ions and metalloproteins.In this study,the AutoDock package was employed to example docking into a di-iron binding protein,bacterioferritin.Each binding site of this protein was tested for docking with iron ions.Blind docking experiments showed that all docking conformations converged into two clusters,one for internal iron binding in sites within the metalloprotein and the other for external iron binding on the protein surface.Local docking experiments showed that there were significant differences between two internal iron binding sites.Docking at one site gave a reasonable root-mean-square deviation(RMSD) distribution with relatively low binding energy.Analysis of the binding mode quality for this site revealed that more than half of the docking conformations were categorized as having good binding geometry,while no good conformations were found for the other site.Further investigations indicated that coordinating water molecules contributed to the stability of binding geometries.This study provides an empirical approach towards the study of molecular docking in metalloproteins.