活性酯硬化水玻璃砂的研究

用焙烧活性砂混制而成的活性酯硬化水玻璃砂与普通酯硬化水玻璃砂相比，强度成倍提高，从而减少水玻璃的加入量，改善水玻璃砂的溃散性。实验证明：原砂的表面活性直接影响在水玻璃砂中水玻璃的加入量，是改善水玻璃砂溃散性的关键之一。焙烧活性砂的水玻璃加入量只要１．５％～２．０％，即能满足实际生产的强度要求。     

Preparation and properties of nanosize MnZn ferrite from δ-FeOOH

Ferrous ion was transformed into feroxyhyte (δ-FeOOH) by oxidation. Then, manganese sulfate and zinc sulfate in some ratio were added to the feroxyhyte solution. The co-precipitation was boiling reflux conditions sometime under constant stirring. The nanosize MnZn ferrite powder was formed. The mechanism of preparation of the nanosize MnZn ferrite was discussed, and the formation of feroxyhyte which was playing a key role during the process was mentioned. The properties of powder was tested by means of X-ray diffraction, transmission electron microscopy and vibrating sample magnetometer. The results show that the samples of spherical particles about 20 nm, which have characteristics of ferrimagnetism, has larger saturation magnetization, but the remanent magnetization and coercivity are comparatively smaller. The spinel MnZn ferrite nanosize powder was successfully prepared from δ-FeOOH at low temperature, with low-carbon steel and peroxide as main material.     

航空发动机滑油系统镁合金微生物腐蚀与防护

针对航空发动机滑油系统镁合金部件的工作环境特点，结合外场出现的滑油系统故障分析和返厂大修某发动机统计资料，发现微生物是引起其腐蚀的主要原因。同时，提出一些防护措施。     

Electron Emission from Barium Strontium Titanate Ceramics

This paper focuses on understanding the influence of materials' properties on the ferroelectric electron emission. Ferroelectric ( x =1.0 and 0.8) and paraelectric ( x =0.67 and 0.5) compositions of barium strontium titanate (Ba _x Sr_{(1− x )}TiO₃) system were chosen for study based on their different ferroelectric and dielectric properties. Similar emission current waveforms were obtained from four compositions with negative triggering voltage applied to the rear electrode of the samples. It was difficult to explain the experimental results using the spontaneous polarization-switching model. The mechanism of electron emission from Ba _x Sr_{(1− x )}TiO₃ ceramics was ascertained to surface plasma emission.     

Degree of crosslinking and mechanical properties of crosslinked poly(vinyl alcohol) beads for use in solid-phase organic synthesis

The limited swellability in polar media of the commonly used polystyrene/divinylbenzene (PS-DVB) support materials for solid-phase organic synthesis has led to the development of novel, highly swellable hydrophilic gels designed for use in aqueous or polar media. Poly(vinyl alcohol) beads crosslinked with epichlorohydrin (PVA-EP) were prepared by a two-step inverse-suspension polymerization method. While it is known that the morphology of the resulting beads can be controlled by the ratio of EP versus PVA as well as by the pre-crosslinking time, the actual degree of crosslinking of the beads and their mechanical properties remain unknown. It is therefore the purpose of this study to evaluate the actual degree of crosslinking of beads prepared with different quantities of crosslinker in the feed by spectroscopic (Raman, nuclear magnetic resonance) and chemical (functional group loading) methods. The mechanical properties of these swollen PVA-EP beads will be evaluated by single-bead unconfined compression in solvents such as water, N,N-dimethylformamide (DMF), and tetrahydrofuran (THF) and compared to model PS-DVB beads commonly used for solid phase synthesis.     

节涌流化床压力波动动力学研究(Ⅱ)模拟与实验

研究了节涌流化床多自由度随机波动模型参数,提出了确定气栓和料栓长度的试差迭代法、床层底部的“白噪声”扰动函数和床层表面的正态扰动函数.模型模拟计算的结果对于节涌流化床波动结构的动力学特征、压力波动的频谱特征和波动的传播与衰减等与实验结果取得了较好的吻合.     

NBR／EPDM的增容共混研究

本文采用第三组份增容途径,改善了NBR/EPDM并用胶的相容性、加工性和力学性能。通过对不同增容体系的研究对比,发现不同增容剂的增容效果差异很大,其巾以EVA-14增容效果最为显著,加入该增容剂的并用胶,在适当的工艺条件及硫化体系下,可获得最佳力学性能。本文还研究了不同增容剂对并用炭黑胶各种性能的影响,可以做到在不降低并用胶的力学性能的同时,提高并用胶的耐热空气老化、耐大气老化和耐臭氧老化性能.透射电镜实验和动态力学谱图证明了加与未加增容剂时,NBR/EPDM并用胶均为两相结构,增容剂起表面活性剂的作用,加强了两相界面间的相互作用,使分散相EPDM细微化和均匀化。     

环糊精和表面活性剂在室温磷光中的应用

介绍了环糊精和表面活性剂作为有序介质在室温磷光中的研究进展．并对各种方法的特点和应用情况作了简要概括。认为环糊精和表面活性剂混合介质能大大提高发光物质的室温磷光．而且操作简便．应用前景广阔。     

PVC／PU合金的制备与研究

叙述了选择混炼型聚氨酯(PU)与分子量适中的Ⅱ型聚氯乙烯(PVC)树脂制备PVC/PU合金的过程,讨论了PVC/PU共混比、填充剂、硫化体系、共混工艺等因素对PVC/PU合金性能的影响。结果表明:选择PVC/PU=60/40(质量比),硫化剂TD15份,白炭黑30份,混炼温度140—160℃,可制得性能优良的PVC/PU合金。动态力学性能实验显示了PVC/PU合金有较好的相容性。     

4-(6′甲基苯并噻唑-2′-偶氮)-3,5-二氨基吡唑与钯显色反应的研究和应用

对6种苯并噻唑偶氮吡唑化合物的分析特性进行了探讨,着重研究了4—(6′—甲基苯并噻唑-2′-偶氮)-3,5-二氨基吡唑(MBTAP)与钯离子显色反应的光度性质。在非离子表面活性剂 Brij35存在下与钯离子形成橙红色的配合物。适宜的 pH 值范围为9.0～10.5.配合物的最大吸收波长为510nm,表观摩尔吸光系数为3.01×10~4L·mol~(-1)·cm~(-1)。钯在0～14μg/25mL,范围内服从比尔定律.显色体系可稳定11h。在柠檬酸存在下可消除 Fe~(3+)、Co~(2+)、Cu~(2+)、Ni~(2+)等离子的干扰。