An integrated intelligent machining system for axisymmetric parts using PC-based CAD and CAM software packages

Machining process planning involves the formation of a set of directions describing the machining operations required to transform raw stock into a finished part. Conventional process planning, performed manually, relies on the knowledge and competence of an experienced process planner and tends to be time consuming and error prone. In the past two decades, much effort has been spent on improving process planning by utilizing the power of a computer to emulate the capabilities of an experienced planner. During the same period, computer-aided design (CAD) and computer-aided manufacturing (CAM) software has been developed to enhance design productivity and to assist the NC code generation facets of the machining process. The entire planning process may be automated be integrating CAD and CAM using computer-aided process planing (CAPP). The research described in this paper outlines the design and development of an intelligent CAPP system integrating two commercial CAD and CAM software packages, Autocad and Mastercam.     

Is urine leukocyte esterase test a useful screening method to predict Chlamydia trachomatis infection in women?

We evaluated the use of the leukocyte esterase test (LET) on first-catch urine specimens from women as a screening test to predict infection with Chlamydia trachomatis. For diagnosis, we used Abbott's ligase chain reaction (LCR) on urine specimens and isolation by tissue culture (TC) on cervical brushes. Of 4,053 women attending sexually transmitted disease and family planning clinics, 4.3% (n = 174) were positive by TC and 5.9% (n = 239) were positive by LCR. When LET was compared to TC, the sensitivity, specificity, positive predictive value, and negative predictive value were 54.0, 67.0, 6.8, and 97.0%, respectively. The corresponding performance of LET versus LCR was 53.1, 67.3, 10.1, and 95.8%. Almost half of the laboratory-confirmed chlamydial infections were negative by LET. The low specificity probably reflects multiple causes of pyuria in women and results in a low positive predictive value. LET is neither sensitive nor specific as a predictor of chlamydial infection and cannot be recommended for use as a screening test for C. trachomatis with first-catch urine samples from females from low- or moderate-prevalence populations.     

Hydrolysis of tetracalcium phosphate in H3PO4 and KH2PO4

The activity product of tetracalcium phosphate (TTCP, Ca₄(PO₄)₂O), was determined at 37°C, and the hydrolysis of TTCP was investigated in 0.01–0.1 mol l^–1 H₃PO₄ and KH₂PO₄ solutions by means of calcium and phosphorus analyses, X-ray diffraction and infrared analysis. The activity product, defined as K _sp=(Ca²⁺)⁴ (PO ₄ ^3– )² (OH^–)², was 37.36 as pK _sp, which was smaller than that previously reported (42.4). TTCP easily hydrolysed to form calcium-deficient apatite (Ca-def OHAp, Ca_5–x (HPO₄) _x (PO₄)_3–x (OH)_1–x ), or dicalcium phosphate dihydrate (DCPD, CaHPO₄2H₂O), depending on the initial phosphate concentration. With 0.1 mol l^–1 H₃PO₄, TTCP hydrolysed to form DCPD within several minutes. In 0.025 mol l^–1 H₃PO₄ and 0.1 mol l^–1 KH₂PO₄, TTCP hydrolysed to form Ca-def OHAp through DCPD. In the latter solution, a small amount of octacalcium phosphate (OCP, Ca₈(H₂PO₄)₂(PO₄)₄5H₂O), was detected as an intermediate product. In 0.025 mol l^–1 KH₂PO₄, TTCP hydrolysed directly to form Ca-def OHAp. In 0.01 mol l^–1 H₃PO₄, hydrolysis of TTCP was not completed, although Ca-def OHAp was only a product. Thus the final product and the degree of hydrolysis depended on the pH and the overall Ca/P ratio in the reaction system. The rate of Ca-def OHAp formation seemed to be controlled by the dissolution rate of TTCP rather than the crystallization rate of the OHAp.     

Simple approximations of the DC flux influence on the core losspower electronic ferrites and their use in design of magnetic components

The effect of DC flux on the core loss is examined for the practical range of power and frequency. Relevant core loss equations are derived and applied to an optimization algorithm to determine the minimum core loss at a given ratio of s (DC flux density to AC peak flux density). It has been found that the curves of hysteresis loss density versus the ratio of s exhibit a peak at a critical ratio. Below or above this critical ratio, the loss density decreases drastically. On the other hand, the curves of eddy-current loss density versus the ratio of s exhibits a minimum point at a critical ratio. Below or above this critical ratio, the loss density increases gradually     

Comparative hall measurements on wet- and dry-oxidized 4H-SiC MOSFETs

Hall measurements have been used to compare the properties of 4H-SiC inversion-mode MOSFETs with “wet” and “dry” gate oxides. While the field-effect mobilities were approximately 3–5 cm²/Vs, the Hall mobilities in 4H-SiC MOSFETs in the wet and dry oxide samples were approximately 70–80 cm²/Vs. The dry-oxidized metal oxide semiconductor field effect transistors (MOSFETs) had a higher transconductance, improved threshold voltage, improved subthreshold slope, and a higher inversion carrier concentration compared to the wet-oxidized MOSFETs. The difference in characteristics between the wet- and the dry-oxidized MOSFETs is attributed to the larger fixed oxide charge in the dry oxide sample and a higher interface trap density in the wet oxide sample.     

Performance evaluation of a multichannel transceiver system forADSL and VHDSL services

The authors study the performance of a multichannel modulation method for asymmetric digital subscriber lines (ADSLs) and very high-speed digital subscriber lines (VHDSLs). In the ADSL case, over all unloaded North American subscriber lines in the test set, a unidirectional 1.536 Mb/s data rate service from the end office to the customer premises is possible on a single twisted pair at an error rate of 10^-7 with at least a 6 dB margin used coded multichannel modulation with sufficient transmit power. In the VHDSL case, data rates in excess of 100 Mb/s can be transmitted reliably, at an error rate of 10^-7, using uncoded multichannel modulation on a single twisted pair over a distance ⩽150 ft with a sufficiently high sampling rate (≈24 MHz) and transmit power. It is shown that a cost-effective multichannel transceiver design suggested for high-speed digital subscriber line (HDSL) service will also work well for ADSL and VHDSL services with only minimal modifications     

Exploratory analysis of brain connectivity with ICA.

Covariance-based methods of exploration of functional connectivity of the brain from functional magnetic resonance imaging (fMRI) experiments, such as principal component analysis (PCA) and structural equation modeling (SEM), require a priori knowledge such as an anatomical model to infer functional connectivity. In this research, a hybrid method, combining independent component analysis (ICA) and SEM, which is capable of deriving functional connectivity in an exploratory manner without the need of a prior model is introduced. The spatial ICA (SICA) derives independent neural systems or sources involved in task-related brain activation, while an automated method based on the SEM finds the structure of the connectivity among the elements in independent neural systems. Unlike second-order approaches used in earlier studies, the task-related neural systems derived from the ICA provide brain connectivity in the complete statistical sense. The use and efficacy of this approach is illustrated on two fMRI datasets obtained from a visual task and a language reading task.