Transient response following frequency or amplitude switching in a cesium beam tube

The transient responses of an optically pumped cesium beam tube to square wave frequency and amplitude modulation is considered. The frequency transient is computed assuming a phase difference phi of either 0 or pi between the two oscillatory fields. We present theoretical and experimental data showing that, contrary to the frequency transient, the amplitude transient depends on the direction of switching. The knowledge of this property is useful for the design of the servo-loop controlling the amplitude of the microwave signal applied to the atomic resonator. A justification of this asymmetrical behavior is given. Experimental results confirm the theoretical predictions in the case phi=pi.     

A precise pneumatic co-axial jet gauging system for surface roughness measurements

Surface texture measurements have an anomalous position in the science of metrology. The property of surface texture is essentially qualitative. A quantitative index can only be assigned indirectly by reference to instrumentation operating in accordance with geometric parameters. The development of more refined production techniques, more exacting design requirements, and more precise measuring methods, coupled with the desire for a better understanding of the relationship between surface properties and surface functions, has stimulated the search for quantitative methods of assessment.Expensive electronic, optical and holographics instruments are available, but are time consuming, complicated, and if not correctly operated, confusing. Correctly used, they can provide the very certain, accurate results imperative for research and development work. For most production and workshop requirements, however, this high accuracy is unnecessary and wasteful.Considerable research effort has been expended on conventional single measuring nozzle gauging systems. No work has been done on coaxial jet gauging system.     

An adaptive multiuser detector for DS‐CDMA systems in multipath fading channels

In this paper, we investigate the performance of an adaptive multistage detection scheme for direct‐sequence code‐division multiple‐access (DS‐CDMA) systems. The first stage consists of an adaptive multiuser detector which is based on the linear constrained minimum variance (LCMV) criterion. The interference cancellation (IC) occurs in the second stage. The performance of the iterative receiver over both flat and frequency‐selective fading channels is investigated and compared to the single‐user bound. In all cases, and under heavy system loads with near‐far problems, the iterative receiver is shown to offer substantial performance improvement and large gain in user‐capacity relative to the standard LCMV. In flat‐fading channels, our results show that the performance of the iterative detector is very close to the single‐user bound. For the frequency‐selective channel, this performance is noted to be in the order of 1 dB far from the single‐user bound. Copyright © 2007 John Wiley & Sons, Ltd.     

Anticonvulsant Profiles of Certain New 6-Aryl-9-substituted-6,9-diazaspiro-[4.5]decane-8,10-diones and 1-Aryl-4-substituted-1,4-diazaspiro[5.5]undecane-3,5-diones

Synthesis and anticonvulsant potential of certain new 6-aryl-9-substituted-6,9-diazaspiro[4.5]decane-8,10-diones (6a–l) and 1-aryl-4-substituted-1,4-diazaspiro[5.5]undecane-3,5-diones (6m–x) are reported. The intermediates 1-[(aryl)(cyanomethyl)amino]cycloalkanecarboxamides (3a–f) were prepared via adopting Strecker synthesis on the proper cycloalkanone followed by partial hydrolysis of the obtained nitrile functionality and subsequent N-cyanomethylation. Compounds 3a–f were subjected to complete nitrile hydrolysis to give the respective carboxylic acid derivatives 4a–f which were cyclized under mild conditions to give the spiro compounds 5a–f. Ultimately, compounds 5a–f were alkylated or aralkylated to give the target compounds 6a–i and 6m–u. On the other hand, compounds 6j–l and 6v–x were synthesized from the intermediates 5a–f through alkylation, dehydration and finally tetrazole ring formation. Anticonvulsant screening of the target compounds 6a–x revealed that compound 6g showed an ED₅₀ of 0.0043 mmol/kg in the scPTZ screen, being about 14 and 214 fold more potent than the reference drugs, Phenobarbital (ED₅₀ = 0.06 mmol/kg) and Ethosuximide (ED₅₀ = 0.92 mmol/kg), respectively. Compound 6e exhibited an ED₅₀ of 0.019 mmol/kg, being about 1.8 fold more potent than that of the reference drug, Diphenylhydantoin (ED₅₀ = 0.034 mmol/kg) in the MES screen. Interestingly, all the test compounds 6a–x did not show any minimal motor impairment at the maximum administered dose in the neurotoxicity screen.     

Starting transients of three phase reluctance motors as affected bytorsional dynamics

In this paper, a rigorous mathematical model describing the transient behavior of three-phase reluctance motors under the effect of torsional dynamics is developed. Provisions are made to allow the analysis of both the three-phase balanced mode of operation and the single-phase mode of operation of such motors. The resulting state-space equations are then solved numerically in order to yield the required transient response curves. The outcome of this study will help in devising techniques to deal with the dangerous consequences of the electromechanical resonance phenomenon that may arise     

A comparative study on the starting methods of three phasewound-rotor induction motors. I

This paper presents a comparative study on the starting performance of three phase wound-rotor induction motors under different methods of starting. These methods are online direct starting, variable rotor resistance starting and double feed starting. In the double feed starting, the rotor winding is connected in parallel with the stator winding across the supply for a predetermined short period. By this connection, the motor produces an extremely high starting torque. For carrying out the investigations sought, a rigorous state space mathematical model has been developed and simulated. The effect of torsional dynamics has been taken into considerations     

An integrated FEC coding scheme for ATM transmission over regenerative satellite networks

The application of asynchronous transfer mode (ATM) on both wireless and satellite networks requires system adaptation. This adaptation has to improve the overall system's performance, and achieve high quality‐of‐service classes approaching that for fibre‐optic communications. In this paper, a new integrated forward‐error‐correction (FEC) coding scheme is introduced for ATM transmission over regenerative satellite networks. The proposed FEC scheme is a concatenation of two Reed–Solomon codes tailored for the header and payload parts of the ATM cell. This integrated coding scheme is shown to significantly improve the cell loss ratio as compared to the standard CRC code used in the ATM cell header. We obtain both upper and lower performance bounds for the concatenated code and check their accuracy when compared to exact system's performance. Both analytical and simulation results show that a cell loss ratio and bit‐error rate (BER) of 10^?25 and 10^?7 can be, respectively, achieved with minimum delay requirements on the SATCOM link. Finally, an approximation for the system's throughout is obtained. It is shown that using a hybrid selective‐repeat automatic‐repeat‐request (SR‐ARQ) with the RS code, a large throughput of approximately 0.843 can be achieved at BERs lower than 10^?7 for data services. Copyright © 2005 John Wiley & Sons, Ltd.     

Acoustic, piezoelectric, and dielectric nonlinearities of AlN in coupled resonator filters for high RF power levels

Coupled resonator filters (CRFs) are the new generation of BAW filters recently designed for the front-end modules of mobile transmission systems. Looking for designers' requirements, CRF devices have been characterized and modeled. The model based on equivalent circuits relies on material constants such as stiffness and electro-coupling coefficients, and works only for linear-mode propagation. Because of their positions between antennas and power amplifiers, they often work under high RF power, inducing nonlinear response in the AlN piezoelectric layer. In this work, we analyze for the first time the nonlinear behavior of AlN material particularly for coupled BAW resonators. To characterize the nonlinear effects in CRFs, we measure the 1-dB gain compression point (P1dB) and the intercept point (IP(3)). Then, we develop a nonlinear model of CRFs using harmonic balance (HB) simulation in commercially available software. The HB environment allows fitting simulations to measurements in terms of P(1dB) and IP(3). We find that a high RF power induces nonlinear changes in the material constants' real parts: elastic stiffness c(33) (4.9%), piezoelectric e(33) (17.4%), and permittivity ?(33) (5.2%). These nonlinear variations of material constants describe the nonlinear behavior of CRF devices using the same deposit process for AlN material.