Photo-vulcanization using thiol-ene chemistry: Film formation,morphology and network characteristics of UV crosslinked rubber latices

The photo-vulcanization with versatile thiol-ene chemistry represents an innovative approach to crosslink diene-rubber materials both in latex and in solid film state. In this work, the structure of elastomer-based thiol-ene networks and the morphology after film formation are studied in detail using electron microscopic techniques, atomic force microscopy and multiple-quantum solid-state NMR spectroscopy. Additionally, film formation properties and corresponding macroscopic properties of photo-vulcanized natural rubber (NR) latex and its synthetic counterpart, isoprene rubber (IR) latex, are determined in dependence on the curing procedure (pre- and post-vulcanization). The results reveal that thiol-ene cured elastomers comprise homogenously distributed crosslinks with a low amount of short chain defects. Whilst photochemically pre-cured NR latex particles provide coherent films, the film formation and mechanical properties of IR are strongly governed by the crosslink density of the latex particles. In film state, photo-vulcanization promotes narrow crosslink distributions and excellent tensile properties of both NR and IR.     

Brassica Plant Responses to Mild Herbivore Stress Elicited by Two Specialist Insects from Different Feeding Guilds

Compensation growth and chemical defense are two components of plant defense strategy against herbivores. In this study, compensation growth and the response of primary and secondary metabolites were investigated in Brassica rapa plants subjected to infestation by two herbivores from contrasting feeding guilds, the phloem-feeding aphid Brevicoryne brassicae and the leaf-feeding caterpillar Pieris brassicae. These specialist herbivores were used at two different densities and allowed to feed for seven days on a young caged leaf. Changes in growth rates were assessed for total leaf area and bulb mass, whereas changes in primary and secondary metabolites were evaluated in young and mature leaves, roots, and bulbs. Mild stress by caterpillars on young plants enhanced mean bulb mass and elicited a contrasting regulation of aliphatic and indolic glucosinolates in the leaves. In contrast, mild stress by aphids enhanced leaf growth and increased glucosinolate concentrations in the bulb, the most important storage organ of B. rapa. A similar mild stress by either herbivore to older plants did not alter plant growth parameters or concentrations of the metabolites analyzed. In conclusion, Brassica plant growth was either maintained or enhanced under mild herbivore stress, and defense patterns differed strongly in response to herbivore type and plant development stage. These results have implications for the understanding of plasticity in plant defenses against herbivores and for the management of Brassica rapa in agroecosystems.     

Functional Characterization of the Solute Carrier LAT-1 (SLC7A5/SLC2A3) in Human Brain Capillary Endothelial Cells with Rapid UPLC-MS/MS Quantification of Intracellular Isotopically Labelled L-Leucine

The solute carrier L-type amino acid transporter 1 (LAT-1/SLC7A5) is a viable target for drug delivery to the central nervous system (CNS) and tumors due to its high abundance at the blood–brain barrier and in tumor tissue. LAT-1 is only localized on the cell surface as a heterodimer with CD98, which is not required for transporter function. To support future CNS drug-delivery development based on LAT-1 targeting, we established an ultra-performance liquid chromatography–tandem mass spectrometry (UPLC-MS/MS) assay for stable isotopically labeled leucine ([¹³C₆, ¹⁵N]-L-leucine), with a dynamic range of 0.1–1000 ng/mL that can be applied for the functional testing of LAT-1 activity when combined with specific inhibitors and, consequently, the LAT-1 inhibition capacity of new compounds. The assay was established in a 96-well format, facilitating high-throughput experiments, and, hence, can support the screening for novel inhibitors. Applicable recommendations of the US Food and Drug Administration and European Medicines Agency for bioanalytical method validation were followed to validate the assay. The assay was applied to investigate the IC₅₀ of two well-known LAT-1 inhibitors on hCMEC/D3 cells: the highly specific LAT-1 inhibitor JPH203, which was also used to demonstrate LAT-1 specific uptake, and the general system L inhibitor BCH. In addition, the [¹³C₆, ¹⁵N]-L-leucine uptake was determined on two human brain capillary endothelial cell lines (NKIM-6 and hCMEC/D3), which were characterized for their expressional differences of LAT-1 at the protein and mRNA level and the surface amount of CD98. The IC₅₀ values of the inhibitors were in concordance with previously reported values. Furthermore, the [¹³C₆, ¹⁵N]-L-leucine uptake was significantly higher in hCMEC/D3 cells compared to NKIM-6 cells, which correlated with higher expression of LAT-1 and a higher surface amount of CD98. Therefore, the UPLC-MS/MS quantification of ([¹³C₆, ¹⁵N]-L-leucine is a feasible strategy for the functional characterization of LAT-1 activity in cells or tissue.     

Thin-film solar cells

The R&D status of cells and modules based on hydrogenated amorphous silicon (a-Si:H) and those based on CdTe and CuInSe₂ is reviewed. The stability of a-Si:H solar cells is still a major concern. Improvements have been achieved on an empirical basis by application of multijunction structures, optimization of interfaces, etc. Stabilized efficiencies of close to 10% have been reported. In parallel, the introduction of the ‘defect-pool model’ led to remarkable progress in understanding; it follows that a-SiGe:H instead of a-Si:H should be used for the i-layer (absorber). Improved cell engineering concepts, however, such as enhancement of the built-in electric field via reduction of the i-layer thickness and/or folded structures, are believed to be more promising. Polycrystalline thin-film cells based on CdTe and CuInSe₂ are not affected by inherent degradation mechanisms. the specific properties of these materials demand heterojunctions, and particular problems arise due to the polycrystallinity of the films and to the lattice mismatch and mismatch of the electronic band structures of the materials involved. These are discussed in conjunction with measures currently applied for optimizing solar cell performance. Both cell types exhibit eficiencies in the range 16-17%. Estimations of production costs and energy payback times of thin-film photovoltaic modules are reviewed (even below 1 US$ W_p⁻¹ and as low as 4 months, respectively) and environmental concerns, especially for Cd-containing cells, are summarized.     

Composition of bacterial and archaeal communities in freshwater sediments with different contamination levels (Lake Geneva, Switzerland)

The aim of this study was to compare the composition of bacterial and archaeal communities in contaminated sediments (Vidy Bay) with uncontaminated sediments (Ouchy area) of Lake Geneva using 16S rRNA clone libraries. Sediments of both sites were analysed for physicochemical characteristics including porewater composition, organic carbon, and heavy metals. Results show high concentrations of contaminants in sediments from Vidy. Particularly, high contents of fresh organic matter and nutrients led to intense mineralisation, which was dominated by sulphate-reduction and methanogenesis. The bacterial diversity in Vidy sediments was significantly different from the communities in the uncontaminated sediments. Phylogenetic analysis revealed a large proportion of Betaproteobacteria clones in Vidy sediments related to Dechloromonas sp., a group of dechlorinating and contaminant degrading bacteria. Deltaproteobacteria, including clones related to sulphate-reducing bacteria and Fe(III)-reducing bacteria (Geobacter sp.) were also more abundant in the contaminated sediments. The archaeal communities consisted essentially of methanogenic Euryarchaeota, mainly found in the contaminated sediments rich in organic matter. Multiple factor analysis revealed that the microbial community composition and the environmental variables were correlated at the two sites, which suggests that in addition to environmental parameters, pollution may be one of the factors affecting microbial community structure.     

Probing molecular mobility during crosslinking process of commercial resins by NMR multiexponential relaxation data analysis

In this study, we present the experimental results for the crosslinking process of a commercial polyester resin based on measurements of the spin lattice relaxation time T₁ of protons, as function of the crosslinking time evolution. Multiexponential decomposition of the evolution of magnetization measured in inversion‐recovery experiments is performed. The population of “rigid” and “mobile” nuclear spin sites was estimated as function of time evolution. In analogy to the usual monomer conversion u, site conversion from “mobile” to “rigid” sites u_M were also estimated as a function of time evolution and initial concentrations of the reagents. The multiexponential decomposition approach of T₁ relaxation data allows one to follow crosslinking processes. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Current Trends in Pretreatment and Fractionation of Lignocellulose as Reflected in Industrial Patent Activities

The pretreatment process to disintegrate lignocellulose and to fractionate its three main components hemicellulose, cellulose, and lignin, is a crucial step to enable sustainable and economic value chains based on biomass feedstock. This review provides an overview of the recent patenting activities on pretreatment. Most of these activities focus on optimization of different known processes to improve economics, such as increased catalyst efficiency, effluents recirculation, or lignin valorization. However, also a number of patents and demonstration activities based on emerging concepts for pretreatments are observed.     

Potent,Metabolically Stable 2‐Alkyl‐8‐(2H‐1,2,3‐triazol‐2‐yl)‐9H‐adenines as Adenosine A2A Receptor Ligands

Inhibition of adenosine A_2A receptors has been shown to elicit a therapeutic response in preclinical animal models of Parkinson’s disease (PD). We previously identified the triazolo‐9H‐purine, ST1535, as a potent A_2AR antagonist. Studies revealed that ST1535 is extensively hydroxylated at the ω‐1 position of the butyl side chain. Here, we describe the synthesis and evaluation of derivatives in which the ω‐1 position has been substituted (F, Me, OH) in order to block metabolism. The stability of the compounds was evaluated in human liver microsomes (HLM), and the affinity for A_2AR was determined. Two compounds, (2‐(3,3‐dimethylbutyl)‐9‐methyl‐8‐(2H‐1,2,3‐triazol‐2‐yl)‐9H‐purin‐6‐amine ( 3 b ) and 4‐(6‐amino‐9‐methyl‐8‐(2H‐1,2,3‐triazol‐2‐yl)‐9H‐purin‐2‐yl)‐2‐methylbutan‐2‐ol ( 3 c ), exhibited good affinity against A_2AR (K_i=0.4 nM and 2 nM , respectively) and high in vitro metabolic stability (89.5 % and 95.3 % recovery, respectively, after incubation with HLM for two hours).     

Experimental and calculated liquid-liquid interfacial tension in demixing metal alloys

Liquid-liquid interracial tension in binary and temary Al-based monotectic systems has been determined experimentally with a tensiometric method in a wide temperature interval. The temperature dependence of the interfacial tension is well described by a power law function of the type σαβ - （1 - T/Tc）δ with the critical exponent δ= 1.3 and a critical temperature Tc. Theoretical models describing the liquid-liquid interface in monotectic alloys and their applicability for calculation of the interfacial tension and its temperature dependence in binary systems are considered.