Homonucleotide tracts, short repeats and CpG/CpNpG motifs are frequent sites for heterogeneous mutations in the neurofibromatosis type 1 (NF1) tumour-suppressor gene

Glutamatergic synaptic potentials induced by micromolar concentrations of the potassium conductance blocker 4-aminopyridine (4-AP) were recorded intracellularly from rat neostriatal neurons in the presence of 10 microM bicuculline (BIC). These synaptic potentials originate from neostriatal cortical and thalamic afferents and were completely blocked by 10 microM 6-cyano-7-nitroquinoxaline-2,3-dione (CNQX) plus 100 microM D-2-amino-5-phosphonovaleric acid (2-APV). Their inter-event time intervals could be fitted to exponential distributions, suggesting that they are induced randomly. Their amplitude distributions had most counts around 1 mV and fewer counts with values up to 5 mV. Since input resistance of the recorded neurons is about 40 M omega, the amplitudes agree to quantal size measurements in mammalian central neurons. The action of a D2 agonist, quinpirole, was studied on the frequency of these events. Mean amplitude of synaptic potentials was preserved in the presence of 2-10 microM quinpirole, but the frequency of 4-AP-induced glutamatergic synaptic potentials was reduced in 35% of cases. The effect was blocked by the D2 antagonist sulpiride (10 microM). Input resistance, membrane potential, or firing threshold did not change during quinpirole effect, suggesting a presynaptic site of action for quinpirole in some but not all glutamatergic afferents that make contact on a single cell. The present experiments show that dopaminergic presynaptic modulation of glutamatergic transmission in the neostriatum does not affect all stimulated afferents, suggesting that it is selective towards some of them. This may control the quality and quantity of afferent flow upon neostriatal neurons.     

Causal modeling to estimate sensitivity and specificity of a test when prevalence changes

The suppressive effect of the halogenated inhalation anesthesia on cortical somatosensory evoked potentials (cSSEPs) has been well documented. Less studied and appreciated is the effect of nitrous oxide often with a narcotic as an alternative to a potent agent for spinal cord monitoring. This study sought to define more clearly the influence of nitrous oxide on cSSEPs elicited to posterior tibial nerve stimulation. A secondary purpose was to demonstrate the advantage of a total intravenous propofol anesthesia in facilitating uncompromised large-amplitude cSSEPs. Fifty adult patients undergoing anterior cervical discectomy served as the study sample. Brainstem and cortical posterior tibial nerve SSEPs were recorded under two independent anesthesia conditions, namely, nitrous oxide and propofol. Results demonstrated a significant amplitude reduction and latency prolongation with the nitrous oxide versus propofol protocol. cSSEP amplitude with propofol was, on the average, approximately two times larger than that with nitrous oxide. Based on these findings, the use of nitrous-oxide anesthesia is not recommended when limited to monitoring cSSEPs that are already amplitude compromised secondary to existing spinal cord disease.     

基于非线性规划的指数自回归模型的辨识

讨论了指数自回归模型的辨识问题，证明了该模型最小二乘估计的目标函数的非凸性，并给出了使该函数为凸的条件，最后给出了辨识该模型的算法及该算法的收敛性，并以数值例子加以说明。     

Particle-bombardment-mediated DNA vaccination with rotavirus VP4 or VP7 induces high levels of serum rotavirus IgG but fails to protect mice against challenge

We recently reported that epidermal immunization using the PowderJet particle delivery device with plasmid vector pcDNA1/EDIM6 encoding rotavirus VP6 of murine strain EDIM induced high levels of serum rotavirus IgG but failed to protect mice against EDIM infection (Choi, A. H., Knowlton, D. R., McNeal, M. M., and Ward, R. L. (1997) Virology 232, 129-138.). This was extended to determine whether pcDNA1/EDIM4 or pcDNA1/EDIM7, which encode either rotavirus VP4 or VP7, the rotavirus neutralization proteins, could also induce rotavirus-specific antibody responses and if these responses resulted in protection. Titers of rotavirus serum IgG increased with the first dose in mice immunized with pcDNA1/EDIM7, but little or no serum rotavirus IgG was detected in mice immunized with pcDNA1/EDIM4. In vitro assays with these plasmids in rabbit reticulocyte lysates showed that VP4 was expressed but the amount was considerably lower than VP6 or VP7. To improve expression of VP4 and induction of rotavirus-specific humoral responses, the coding region of VP4 was cloned into the high-expression plasmid WRG7054 as a fusion protein containing the 22-amino-acid secretory signal peptide of tissue plasminogen activator (tPA) at its N terminus. In vitro expression of tPA::VP4 was significantly higher than unmodified VP4, and mice inoculated with WRG7054/EDIM4 generated high titers of rotavirus IgG. The coding sequence of VP7 without the first 162 nucleotides was also cloned into WRG7054, but no difference was observed between titers of serum rotavirus IgG in mice immunized with this plasmid (WRG7054/EDIM7Delta1-162) and pcDNA1/EDIM7. The rotavirus-specific IgG titers in all immune sera were predominantly IgG1 indicating induction of Th 2-type responses. None of the mice immunized with any of the VP4 or VP7 plasmids developed serum or fecal rotavirus IgA or neutralizing antibody to EDIM. When immunized mice were challenged with EDIM virus, there was no significant reduction in viral shedding relative to unimmunized controls. Therefore epidermal immunization with VP4 or VP7 alone elicited rotavirus IgG responses but did not protect against homologous rotavirus challenge.     

Solar/UV-induced photocatalytic degradation of three commercial textile dyes.

The photocatalytic degradation of three commercial textile dyes with different structure has been investigated using TiO(2) (Degussa P25) photocatalyst in aqueous solution under solar irradiation. Experiments were conducted to optimise various parameters viz. amount of catalyst, concentration of dye, pH and solar light intensity. Degradation of all the dyes were examined by using chemical oxygen demand (COD) method. The degradation efficiency of the three dyes is as follows: Reactive Yellow 17(RY17) > Reactive Red 2(RR2) > Reactive Blue 4 (RB4), respectively. The experimental results indicate that TiO(2) (Degussa P25) is the best catalyst in comparison with other commercial photocatalysts such as, TiO(2) (Merck), ZnO, ZrO(2), WO(3) and CdS. Though the UV irradiation can efficiently degrade the dyes, naturally abundant solar irradiation is also very effective in the mineralisation of dyes. The comparison between thin-film coating and aqueous slurry method reveals that slurry method is more efficient than coating but the problems of leaching and the requirement of separation can be avoided by using coating technique. These observations indicate that all the three dyes could be degraded completely at different time intervals. Hence, it may be a viable technique for the safe disposal of textile wastewater into the water streams.     

Characterization of the cavity nucleation factor for life prediction under creep-fatigue interaction

It is understood that grain boundary cavitation is one of the detrimental processes for the degradation of materials that reduces the creep-fatigue life at high temperatures. In a previous investigation, a model for life prediction under creep-fatigue conditions was proposed in terms of cavity nucleation and growth. In that model, the cavity nucleation factor (P) was introduced to correlate between the number of cavities and the plastic strain range from which athermal vacancies are generated. It was considered to be a material specific constant which was independent of the experimental conditions. However, in this study, it is found that the cavity nucleation factor is a function of the plastic strain range but is independent of the testing temperature at near 0.5 T _m. In the light of this dependency, a new cavity nucleation factor (P'), is introduced. Using this new cavity nucleation factor (P'), a modified equation for life prediction is proposed, and it is shown that there is good agreement between predicted and experimental lives. Additionally, an interesting approach has been made to find the physical meaning of the new cavity nucleation factor (P'). According to this study, it is suggested that the new cavity nucleation factor, which is regarded as a material specific constant, is found to be strongly related to the density of the grain boundary precipitates with a linear relationship existing between them.     

Growth and characterization of hot-wall epitaxial CdTe on (111) HgCdTe and CdZnTe substrates

Thin CdTe films were deposited by hot-wall epitaxy (HWE) on (111) HgCdTe and CdZnTe substrates at temperatures from about 140 to 335°C. X-ray rocking curves were used to show that crystal quality of the CdTe (111)B films improved as substrate temperature increased from 140 to about 250°C. Rocking curve values for full width at half maximum (FWHM) decreased from 2–4 degrees at 140–150°C to less than 100 arc-s at 250°C, and a FWHM of 59 arc-s was the lowest value observed near 250°C. The FWHM of the HWE CdTe was found to be insensitive to growth rate below about 400Å/min, but increased to four degrees at 1250Å/min. X-ray diffraction confirmed that films grown on the B-face at higher temperatures were epitaxial, but contained a significant volume fraction, 35% to 50%, of rotational in-plane twins. Electron microscopy confirmed a coarse twin density, and photoluminescence spectra showed an absence of excitonic emission in the HWE films. Simultaneous growth on two (111) HgCdTe substrates with different surface polarities between 230°C and 335°C showed that deposition rate on the A-face decreased relative to that on the B-face as temperature increased. Films grown on the B-face exhibited better surface morphologies than those grown on the A-face.     

Improved performances of a S-SEED using extremely shallowquantum-wells and asymmetric Fabry-Perot cavity structure

The authors report significantly improved performances of a symmetric self-electrooptic-effect device (S-SEED), with high on-off contrast ratio (>30:l) and large optical bistability loop widths (ΔP=44%) at an applied bias of V_a=0 V, i.e., with no power supply. The S-SEED is made of extremely shallow quantum wells (ESQWs) in an asymmetric Fabry-Perot (AFP) cavity structure. At V_a =5 V ΔP increased by up to 95%, preserving the high contrast ratio. The reflectivity changes at V_a=0 and 5 V were about 15% and 30%, respectively. These are believed to be the largest values ever reported for such structures     

Excited-state-absorption cross sections and amplifier modeling inthe 1300-nm region for Nd-doped glasses

The performance of Nd³⁺-doped fibre amplifiers is limited by strong excited-state absorption (ESA) of the signal, and, even for fluorozirconate glasses, ESA prevents the important region below 1320 nm from being used. To quantify this limitation and explore alternative host materials, ESA and stimulated-emission cross sections have been measured for a representative group of glass compositions. These parameters have been used in an accurate fiber-amplifier model to provide the first quantitative comparisons of performance for Nd³⁺ -doped glasses in the 1300-nm band as a function of host