激光引信数据采集处理系统的研制

文中介绍了为建立目标和背景的激光反射特性数字模型而研制的用于脉宽几十纳秒的数据采集系统的设计和工作方式。针对测量窄脉冲信号幅值及实现不间断连续采集过程的使用目的,将窄脉冲回波信号的身值展宽成100us的方波,以系统设置的发射 基信号或回波信号自身作为采集的同步控制信号,并将基准信号展宽为5-50us的方波,以其上升沿触发采集,实现发射与采集同步,提高了采集存储的有效性;而且,在作用距离范围内,不管目标或背景位于多远处,都能保证于脉宽峰值处采集,保证了采集精度。系统的各项技术指标均达到使用要求并经过了测试试验验证。     

一种基于S1-MME信令的CSFB寻呼优化

TD-LTE系统是纯IP网络,话音解决方案有单卡双待和话音回落两种,话音回落方案对终端电池的续航能力有较大提升。本文重点介绍TD-LTE系统话音回落的寻呼优化,针对寻呼过程中影响成功率的末端原因进行逐一分析定位,对失败占比较大的寻呼无响应、TAU、干扰进行了详细的分析并给出优化建议。     

Organic Tribotronic Transistor for Contact‐Electrification‐Gated Light‐Emitting Diode

Tribotronics is a new field about the devices fabricated using the electrostatic potential created by contact electrification as a “gate” voltage to tune/control charge carrier transport in semiconductors. In this paper, an organic tribotronic transistor is proposed by coupling an organic thin film transistor (OTFT) and a triboelectric nanogenerator (TENG) in vertical contact‐separation mode. Instead of using the traditional gate voltage for controlling, the charge carrier transportation in the OTFT can be modulated by the contact‐induced electrostatic potential of the TENG. By further coupling with an organic light‐emitting diode, a contact‐electrification‐gated light‐emitting diode (CG‐LED) is fabricated, in which the operating current and light‐emission intensity can be tuned/controlled by an external force–induced contact electrification. Two different modes of the CG‐LED have been demonstrated and the brightness can be decreased and increased by the applied physical contact, respectively. Different from the conventional organic light‐emitting transistor controlled by an electrical signal, the CG‐LED has realized the direct interaction between the external environment/stimuli and the electroluminescence device. By introducing optoelectronics into tribotronics, the CG‐LED has open up a new field of tribophototronics with many potential applications in interactive display, mechanical imaging, micro‐opto‐electro‐mechanical systems, and flexible/touch optoelectronics.     

IC Surface Corrosion Inspection by C-Mode Scanning Acoustic Microscopy

C-mode scanning acoustical microscopy, C-SAM, is widely used in plastic package evaluations and for failure analysis. It permits to detect subsurface delaminations, cracks and pores （air bubbles） for different microelectronics packages. In this study, abnormality was observed in C-SAM daily test, the images showed no delaminations but inhomogeneities on the IC surface. Corrosion was found by optical microscope and scanning electron microscope after decapsulation. It can be revealed as the acoustic impedance is different between corrosion and normal area. The presence of inhomogeneities and discontinuities along ultrasonic waves＇ propagation paths inside the matter causes modifications in the amplitude and polarity of ultrasonic waves. However, C-SAM＇s capability in detecting IC surface corrosion has not been presented. The capability will be illustrated and the inspection mechanism will be discussed in this paper.     

LightSheer半导体激光脱毛的疗效评价

目的:评价LightSheer半导体激光脱毛的治疗效果。方法:运用LightSheer半导体激光脱毛系统,对97名患者共113个部位进行脱毛治疗,波长800nm,能量密度24-40J/cm2,脉冲宽度30ms,分别对治疗一次、二次及三次后的有效性进行分级评价。结果:97名患者共113个部位一次治疗后均出现毛发再生减少、再生延迟,再生毛发细小、浅淡。随着治疗次数的增加有效性分级提高。二次治疗后,60%以上可达到3级(毛发减少40-59%);三次治疗后,80%以上可达到3级。腋窝和唇毛部位约50%可达到4级(毛发减少60-79%)。结论:LightSheer半导体激光脱毛系统对亚洲人是安全和有效的,80%的患者经三次治疗后毛发可减少近60%,但要达到更好的疗效需更多次治疗。     

一种二维神经网络模型及其应用

本文提出一种二维神经网络模型,并将它用来实时求解一类矩阵方程.理论和模拟结果表明,该网络可以在时常数数量级(纳秒)内求出与准确解任意接近的解.     

氮激光诱导荧光光谱法对动脉粥样硬化斑块的诊断研究

采用波长为337nm的N_2分子激光作光源,利用激光诱导荧光光谱法测量血管组织的自荧光,选择波长为390nm和476nm处的荧光强度比值可以很好地鉴别动脉血管的正常组织和粥样硬化斑块,阈值为1.25。     

YBa2Cu3O7—δ超导体的磁穿透深度及相对能隙

根据测得的表面电阻R_S(T),通过在BCS理论框架中引入一个修正电导率,计算出YBa_2Cu_3O_(7-δ)(YBCO)超导材料的磁穿透深度和简约能隙与温度的相关性.引入修正电导率主要是根据YBCO超导体中电子结构表示Cu-O链对微波表面电阻的贡献.计算得到的磁穿透深度和相对能隙与实验结果符合得相当好.     

推荐一组陆用拖车载设备振动试验条件

通过某牵引拖挂装车式陆用火控雷达跑车试验,进行振动数据采集分析和处理得到垂直,纵向,横向三个方向的振动和加速度功率谱密度曲线,将之与美军标ＭＩＬ．ＳＴＤ．８１０Ｅ与国军标ＧＪＢ１５０中振动试验和加速度谱密度曲线进行比较,和工程实践对照,拓展形成一组更加符合实际条件且在实验室再现的功率谱密度曲线,并推荐将这组曲线作为陆用拖车载设备的振动试验条件。     

素域上部分bent函数的谱特征

本文在素域上讨论了部分bent函数的谱特征,得到了素域上部分bent函数的几个新的刻画,揭示了部分bent函数的平衡性、线性结构及非零谱值点之间的相互关系,并对部分bent函数的恒变线性结构进行了分类,指出了它们之间的相互关系。