A chemometric approach for the quantification of free fatty acids in cottonseed oil by Fourier transform infrared spectroscopy

The aim of this study was to quantify free fatty acid in cottonseed oil (Gossypium) variety by a chemometric approach using Fourier transform infrared spectroscopy. Calibration standards were prepared by gravimetrical mixing of oleic acid (0.1–40 g/100 g) in neutralized cottonseed oil containing <0.1% free fatty acids. Fourier transform infrared technique coupled with partial least square and principle component regression models were used to develop calibrations in the specific absorption region of carbonyl between 1690–1727 cm^?1. On the basis of regression coefficient and evaluated free fatty acids results with comparison to titration method, partial least square was found to be more accurate than principle component regression calibration model. All the analyzed cottonseed oil varieties showed high content of free fatty acids in the range of 17.1–38.5%. The results of the present study indicated that Fourier transform infrared method in combination with partial least square or principle component regression could be used as a greener alternative to the standard titration method.     

Secure sensors data acquisition and communication protection in eHealthcare: Review on the state of the art

Recent advances in hardware technology have led to the development of low cost, power efficient and more feature rich devices that are amongst the most critical parts of communication networks. These devices or sensors can now sense data with more accuracy, process it by themselves and send it to the neighboring node or the sink node. However, robust and reliable security mechanisms are not yet properly implemented on these sensors due to their limited energy and computation power. Sensors also play a very important role in eHealthcare systems where ubiquitous patient monitoring is performed. As data is generated from the sensor nodes, reliable, secure and attack-resistant data acquisition and transmission is important for an efficient eHealthcare systems. This survey focuses on security issues of sensors data acquisition and transmission protocols, describing their main security features and comparing them in the context of a secure eHealthcare system. A taxonomy of open issues and future challenges is also discussed with respect to specific security metrics described in the paper.     

N‐halamine‐modified polyglycolide (PGA) multifilament as a potential bactericidal surgical suture: In vitro study

In this study, new cationic homopolymer and anionic copolymer were synthesized, and deposited onto polyglycolide sutures using a layer‐by‐layer assembly technique. The coated sutures were rendered antibacterial by chlorinating with dilute solution of household bleach solution at pH 7. The chlorination treatment transformed the N? H groups of anionic copolymer into N‐halamine structures. The N‐halamine‐modified sutures were challenged with Staphylococcus aureus and Escherichia coli O157:H7 bacteria at different contact times. The suture with chlorine loading of 0.22% completely inactivated both bacterial strains in 30 min contact time. Fourier transform infrared spectroscopy, scanning electron microscopy, and analytical titration confirmed the successful deposition of the N‐halamine multilayers. The effect of layer‐by‐layer coatings of polyelectrolytes on the chlorine loading and antibacterial efficacy of sutures was evaluated. The straight‐pull and knot‐pull strength tests performed on the sutures reported slight decline in tensile properties after chlorination treatment. The in vitro hemolysis and cytocompatibility tests revealed that the N‐halamines‐based antibacterial sutures were biocompatible. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42483.     

Recent Advances in Rolling 2D TMDs Nanosheets into 1D TMDs Nanotubes/Nanoscrolls

Transition metal dichalcogenides (TMDs) van der Waals (vdW) 1D heterostructures are recently synthesized from 2D nanosheets, which open up new opportunities for potential applications in electronic and optoelectronic devices. The most recent and promising strategies in regards to forming 1D TMDs nanotubes (NTs) or nanoscrolls (NSs) in this review article as well as their heterostructures that are produced from 2D TMDs are summarized. In order to improve the functionality of ultrathin 1D TMDs that are coaxially combined with boron nitride nanotubes and single-walled carbon nanotubes. 1D heterostructured devices perform better than 2D TMD nanosheets when the two devices are compared. The photovoltaic effect in WS₂ or MoS₂ NTs without a junction may exceed the Shockley–Queisser limit for the above-band-gap photovoltage generation. Photoelectrochemical hydrogen evolution is accelerated when monolayer WS₂ or MoS₂ NSs are incorporated into a heterojunction. In addition, the photovoltaic performance of the WSe₂/MoS₂ NSs junction is superior to that of the performance of MoS₂ NSs. The summary of the current research about 1D TMDs can be used in a variety of ways, which assists in the development of new types of nanoscale optoelectronic devices. Finally, it also summarizes the current challenges and prospects.     

What is the relationship between indoor air quality parameters and airborne microorganisms in hospital environments? A systematic review and meta-analysis

Airborne microorganisms in hospitals have been associated with several hospital-acquired infections (HAIs), and various measures of indoor air quality (IAQ) parameters such as temperature, relative humidity, carbon dioxide (CO₂), particle mass concentration, and particle size have been linked to pathogen survival or mitigation of pathogen spread. To investigate whether there are quantitative relationships between the concentration of airborne microorganisms and the IAQ in the hospital environment. Web of Science, Scopus and PubMed databases were searched for studies reporting airborne microbial levels and any IAQ parameter(s) in hospital environments, from database inception to October 2020. Pooled effect estimates were determined via random-effects models. Seventeen of 654 studies were eligible for the meta-analysis. The concentration of airborne microbial measured as aerobic colony count (ACC) was significantly correlated with temperature (r = 0.25 [95% CI = 0.06–0.42], p = 0.01), CO₂ concentration (r = 0.53 [95% CI = 0.40–0.64], p ˂ 0.001), particle mass concentration (≤5 µg/m³; r = 0.40 [95% CI = 0.04–0.66], p = 0.03), and particle size (≤5 and ˃5 µm), (r = 0.51 [95% CI = 0.12–0.77], p = 0.01 and r = 0.55 [95% CI = 0.20–0.78], p = 0.003), respectively, while not being significantly correlated with relative humidity or particulate matter of size >5 µm. Conversely, airborne total fungi (TF) were not significantly correlated with temperature, relative humidity, or CO₂ level. However, there was a significant weak correlation between ACC and TF (r = 0.31 [95% CI = 0.07–0.52], p = 0.013). Although significant correlations exist between ACC and IAQ parameters, the relationship is not definitive; the IAQ parameters may affect the microorganisms but are not responsible for the presence of airborne microorganisms. Environmental parameters could be related to the generating source, survival, dispersion, and deposition rate of microorganisms. Future studies should record IAQ parameters and factors such as healthcare worker presence and the activities carried out such as cleaning, sanitizing, and disinfection protocols. Foot traffic would influence both the generation of microorganisms and their deposition rate onto surfaces in the hospital environment. These data would inform models to improve the understanding of the likely concentration of airborne microorganisms and provide an alternative approach for real-time monitoring of the healthcare environment.     

Optimizing Approach of Water Allocation to Off-Takes During Reduced Flows

Multi-objective optimization models with an index were developed based on farmers’ preferences, local requirements, supplies available at the head of the canal, system losses, crop demand about different growth stages, and field soil moisture balance. The models were applied using linear programming. The Model 1 determines the cropping pattern by maximizing net economic benefits using a monthly basis lumped volume available at the head of the canal and is set to the minimum and maximum area constraints along with the constraint of minimum main crop area. The areas for different crops given by the first model form input for the Model 2. The other inputs of Model 2 included periodic supply available at the head of the primary canal (7-day period in this study), root growth depth, demand, and soil moisture constants. The Model 2 optimizes the sum of relative yields of all the crops and provide the irrigation levels of various crops for specified periods. Finally, the distributed area and irrigation levels determined by Model 2 are used in conjunction with the losses to decide flow rates of off takes. The complete program was implemented in the West branch irrigated area of Mirpurkhas subdivision. The results showed that the resources were allocated to off-takes in a competitive and conflict-free manner.

     

Synergistic effect of high-intensity ultrasound and β-cyclodextrin treatments on browning control in apple juice

This work evaluated the synergistic effects of combined high-intensity ultrasound (HIU) with β-cyclodextrin (β-CD) treatments on inhibiting browning of apple juice and explored the mechanism through simulation system. The combined treatment of 300 W HIU with 0.006 g mL⁻¹ β-CD had a synergistic impact on maintaining juice colour, resulting in a 39.06% reduction in browning degree, only a 36.64% decrease in total phenolic content, and a 17.82% reduction in PPO activity. The inhibition of enzymatic browning in simulated system revealed that HIU suppressed the enzyme (Polyphenol oxidase, PPO) and β-CD inhibited enzyme (PPO) and embedded substrate (polyphenol). The results of spectroscopic analysis showed that the particle-size distribution of PPO narrowed, the content of α-helix in the secondary structure increased, the fluorescence intensity increased, and the maximum wavelength was red-shifted after HIU and β-CD treatment. Changes in structure could further result in PPO activity loss. Hence, the combined treatment could synthetically alleviate the browning of apple juice.     

A selective organosilica membrane for ethyl acetate dehydration by pervaporation

Organosilica bis(triethoxysilyl) ethane (BTESE) membranes were explored for pervaporation dehydration of binary and ternary mixtures of ethyl acetate (EA) by undiluted sol coating combined with flash firing. Three BTESE membranes (M1, M2, and M3) were fabricated on macroporous supports by varying BTESE concentrations (0.5, 2.5, and 5 wt% BTESE, respectively) in polymer sols. The membranes were characterized by DLS, SEM, FTIR, XRD, contact angle, AFM, and pervaporation performance to discuss the effect of the BTESE contents in the polymer sol on the formation and dehydration performance of resulting organosilica membranes. It was found that 5 wt% loading of BTESE led to a highly selective membrane for dehydration of EA/H₂O mixture. Among the synthesized membranes, M3 delivered flux of 0.84 ± 0.05 kg.m⁻².h⁻¹ with a selectivity of >10,000 for EA/H₂O mixture (98/2 wt%) at 60°C. The time course of pervaporation dehydration for the EA/H₂O mixture (95/5 wt%) confirms the stability of BTESE membrane in the investigated time period of 120 h. Further, the membrane exhibited excellent selectivity larger than 10,000 for separation of ternary mixtures (90/2/8 wt%) of ethyl acetate/ethanol/water and n-propyl acetate/isopropanol/water respectively, the composition of which is similar to the top product of the distillation column used in the industrial esterification process. The best separation performance and excellent acid stability of BTESE membranes in this study suggest that the simple synthesis protocol of undiluted sol coating and flash firing will provide a cost-effective, quick, and efficient synthesis route for practical membrane based applications.     

Designing Visceral,Behavioural and Reflective Products

Designers and manufacturers often see consumption as the primary objective of a product–with implications such as discarded products,obsolete wastes,and ecological degradation.The paper aims to find the answer to the question,how emotional design can adapt the discarded and undesirable products into something valuable in a long term?This paper presents a framework combining Chapman’s theory and Norman’s theory on three levels of emotional design to highlight what long lasting connection with products entails.A design approach is presented combing the Wabi Sabi philosophy that promotes the celebration of decay and damage.This is used as one of the design principles for the experiments conducted on discarded products.Through constant user interaction before,during and after the experiments the evaluation of design as an agent of transformation is done.The user conducted the evaluation based on the Kansei elements of looks,sound,smell,and feel of the product.The experiments confirmed that a long-term value is only achieved through redesigning and reconstructing the perception of people towards products on a reflective level,rather than the visceral and behavioural elements of the product.The research found attachment to the visceral and behavioural elements of a product instead of an emotional one was causing users to discard products faster than required.The research indicated that many people,including designers and manufacturers,are unconsciously focusing on usability(behavioural level)and physical look(visceral level)of a product that are easily replaced,than on a meaningful way (reflective level)to create and maintain long-lasting emotions.The research concluded with a proposition towards digitization of products which could perhaps be an all round solution to make products more appropriate to human emotions.Digitization could give products the ability to capture,store and then communicate the stories,journey and memories back,in order to empower people to understand the value of longer-term use of products.