Systematic comparison of the use of annular and Zernike circle polynomials for annular wavefronts

The theory of wavefront analysis of a noncircular wavefront is given and applied for a systematic comparison of the use of annular and Zernike circle polynomials for the analysis of an annular wavefront. It is shown that, unlike the annular coefficients, the circle coefficients generally change as the number of polynomials used in the expansion changes. Although the wavefront fit with a certain number of circle polynomials is identically the same as that with the corresponding annular polynomials, the piston circle coefficient does not represent the mean value of the aberration function, and the sum of the squares of the other coefficients does not yield its variance. The interferometer setting errors of tip, tilt, and defocus from a four-circle-polynomial expansion are the same as those from the annular-polynomial expansion. However, if these errors are obtained from, say, an 11-circle-polynomial expansion, and are removed from the aberration function, wrong polishing will result by zeroing out the residual aberration function. If the common practice of defining the center of an interferogram and drawing a circle around it is followed, then the circle coefficients of a noncircular interferogram do not yield a correct representation of the aberration function. Moreover, in this case, some of the higher-order coefficients of aberrations that are nonexistent in the aberration function are also nonzero. Finally, the circle coefficients, however obtained, do not represent coefficients of the balanced aberrations for an annular pupil. The various results are illustrated analytically and numerically by considering an annular Seidel aberration function.     

Recent Advances in Rolling 2D TMDs Nanosheets into 1D TMDs Nanotubes/Nanoscrolls

Transition metal dichalcogenides (TMDs) van der Waals (vdW) 1D heterostructures are recently synthesized from 2D nanosheets, which open up new opportunities for potential applications in electronic and optoelectronic devices. The most recent and promising strategies in regards to forming 1D TMDs nanotubes (NTs) or nanoscrolls (NSs) in this review article as well as their heterostructures that are produced from 2D TMDs are summarized. In order to improve the functionality of ultrathin 1D TMDs that are coaxially combined with boron nitride nanotubes and single-walled carbon nanotubes. 1D heterostructured devices perform better than 2D TMD nanosheets when the two devices are compared. The photovoltaic effect in WS₂ or MoS₂ NTs without a junction may exceed the Shockley–Queisser limit for the above-band-gap photovoltage generation. Photoelectrochemical hydrogen evolution is accelerated when monolayer WS₂ or MoS₂ NSs are incorporated into a heterojunction. In addition, the photovoltaic performance of the WSe₂/MoS₂ NSs junction is superior to that of the performance of MoS₂ NSs. The summary of the current research about 1D TMDs can be used in a variety of ways, which assists in the development of new types of nanoscale optoelectronic devices. Finally, it also summarizes the current challenges and prospects.     

High-feed turning of AISI D2 tool steel using multi-radii tool inserts: Tool life,material removed,and workpiece surface integrity evaluation

Multi-radii tool inserts offer novel configuration that comprises of multiple radii at tool nose. A review of the available literature indicates that there exists a need for experimental investigation on certain key machining characteristics of such tools. This paper reports on tool wear/life, material removed, and workpiece surface roughness when multi-radii mixed alumina TiN coated tool inserts are employed for turning D2 steel. Inserts of three different nose radii (0.40, 0.80, 1.20?mm) at six levels of feed rates (ranging from 0.157 to 0.562?mm/rev) are used. Results show that flank wear is the dominant wear mode with catastrophic tool failure occurring at highest nose radius (1.20?mm) and feed rate (0.562?mm/rev) combination. Also, there is ～59% reduction in tool life accompanied by ～62% increase in quantity of material removed as the feed rate increases from 0.157 to 0.562?mm/rev at maximum nose radius (1.20?mm). Feed rate is found to be statistically significant factor for all three responses considered herein at 95% confidence level. Surface integrity assessment at maximum feed rate reveals presence of a strain hardened layer extending to the depth of 150?µm below the machined surface without any observance of white layer for all the tool conditions and nose radius.     

Use of proteins to minimize the physical aging of EUDRAGIT sustained release films

The objective of this study was to investigate the influence of two proteins, albumin and type B gelatin, on the physical aging of EUDRAGIT® RS 30 D and RL 30 D coated theophylline pellets. The physicomechanical properties of sprayed films, thermal properties of cast films, influence of proteins on the zeta potential and particle size of the dispersion, and the release of proteins from cast films under simulated dissolution conditions were investigated. The release rate of theophylline decreased significantly over time from pellets coated with an acrylic dispersion containing 10% albumin when there was no acidification of the acrylic dispersion; however, when pellets were coated with an acidified EUDRAGIT®/albumin dispersion, the theophylline release rate was stable for dosage forms stored in the absence of humidity. The drug release rate was faster for pellets coated with acrylic dispersions containing 10% gelatin compared to the albumin-containing formulations. When sprayed films were stored at 40°C/75% RH, the water vapor permeability decreased significantly for both EUDRAGIT® films and those containing EUDRAGIT® and albumin; however, there was no significant change in this parameter when 10% gelatin was present. Albumin was released from the acrylic films when the pH of the dissolution media was below the isoelectric point of the protein while no quantitative release of gelatin was observed in pH 1.2 or 7.4 media. The effect of gelatin to prevent the decrease in drug release rate was due to stabilization in water vapor permeability of the film. Acidification of the polymeric dispersion resulted in electrostatic repulsive forces between albumin and the acrylic polymer, which stabilized the drug release rate when the dosage forms were stored in aluminum induction sealed containers at both 40°C/75% RH and 25°C/60% RH.     

Visual control of step length during overground locomotion: Task-specific modulation of the locomotor synergy.

This study evaluated the dynamics of gait adaptations during overground locomotion. Step length of 20 Ss increased or decreased (by 50% or 30%) on visual cues given at several different times (3 or 2) in the step cycle while walking or running, respectively. Ground reaction forces and temporal data were analyzed for each of the 10 trials per condition. Results showed that both vertical and horizontal impulses are modulated. The cuing time affected the way Ss altered step length. For example, during late cuing Ss made changes during free flight phase. Both magnitude and duration of force were altered suggesting modulation of a higher order parameter, the impulse. Success rate was lower for later cuing times. It was also lower for shorter step length than longer one. This suggests that balance requirements constrain the adaptations that can be made. The study implies far greater on-line peripheral control of locomotion than suggested by a dominant central pattern generator control theory. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Lossless image compression: application of Bi-level Burrows Wheeler Compression Algorithm (BBWCA) to 2-D data

This research paper demonstrates the robustness of Bi-level Burrows Wheeler Compression Algorithm (BBWCA) in terms of the compression efficiency for different types of image data. The scheme was designed to take advantage of the increased inter-pixel redundancies resulting from a two pass Burrows Wheeler Transformation (BWT) stage and the use of Reversible Colour Transform (RCT). In this research work, BBWCA was evaluated for raster map images, Colour Filter Array (CFA) images as well as 2-D ElectroEncephaloGraphy (EEG) data and compared against benchmark schemes. Validation has been carried out on various examples and they show that BBWCA is capable of compressing 2-D data effectively. The proposed method achieves marked improvement over the existing methods in terms of compression size. BBWCA is 18.8 % better at compressing images as compared to High Efficiency Video Codec (HEVC) and 21.2 % more effective than LZ4X compressor for CFA images. For the EEG data, BBWCA is 17 % better at compressing images as compared to WINRK and 25.2 % more effective than NANOZIP compressor. However, for the Raster images PAQ8 supersedes BBWCA by 11 %. Among the different schemes compared, the proposed scheme achieves overall best performance and is well suited to small and large size image data compression. The parallelization process reduces the execution time particularly for large size images. The parallelized BBWCA scheme reduces the execution time by 31.92 % on average as compared to the non-parallelized BBWCA.     

Design and Performance Evaluation of Sub-10 nm Gaussian Doped Junctionless SOI and SELBOX FinFET

Silicon - In this paper influences of uniform and non-uniform doping on the performance of SOI and SELBOX FinFET at gate length of sub-7 nm are evaluated. Junctionless devices require very...     

Molecular Mechanisms of Nitric Oxide (NO) Signaling and Reactive Oxygen Species (ROS) Homeostasis during Abiotic Stresses in Plants

Abiotic stressors, such as drought, heavy metals, and high salinity, are causing huge crop losses worldwide. These abiotic stressors are expected to become more extreme, less predictable, and more widespread in the near future. With the rapidly growing human population and changing global climate conditions, it is critical to prevent global crop losses to meet the increasing demand for food and other crop products. The reactive gaseous signaling molecule nitric oxide (NO) is involved in numerous plant developmental processes as well as plant responses to various abiotic stresses through its interactions with various molecules. Together, these interactions lead to the homeostasis of reactive oxygen species (ROS), proline and glutathione biosynthesis, post-translational modifications such as S-nitrosylation, and modulation of gene and protein expression. Exogenous application of various NO donors positively mitigates the negative effects of various abiotic stressors. In view of the multidimensional role of this signaling molecule, research over the past decade has investigated its potential in alleviating the deleterious effects of various abiotic stressors, particularly in ROS homeostasis. In this review, we highlight the recent molecular and physiological advances that provide insights into the functional role of NO in mediating various abiotic stress responses in plants.     

Amphiphilic antidepressant drug amitriptyline hydrochloride under the influence of ionic and nonionic hydrotropes; micellization and phase separation

Herein we report the micellization and cloud point of an amitriptyline hydrochloride (AMT) under the influence of cationic, anionic and nonionic hydrotropes. Anionic hydrotropes were employed to know the micellar and surface behaviors, besides studying the clouding behavior of AMT drug with cationic, anionic and nonionic hydrotropes. Tensiometric study has been performed and the properties studied include the critical micelle concentration (cmc), maximum surface excess at the air/water interface (Γ_max), the minimum area per of amphiphilic molecule at air/water interface (A_min), and the different thermodynamic parameters, besides clouding phenomenon. Interaction parameters of micelles (β^m) and monolayer (β^σ) indicate that drug-hydrotrope systems show better interaction at the interface than in micelles.     

Keratin K15 as a Biomarker of Epidermal Stem Cells

Keratin 15 (K15) is type I keratin protein co-expressed with the K5/K14 pair present in the basal keratinocytes of all stratified epithelia. Although it is a minor component of the cytoskeleton with a variable expression pattern, nonetheless its expression has been reported as a stem cell marker in the bulge of hair follicles. Conversely, suprabasal expression of K15 has also been reported in both normal and diseased tissues, which is inconsistent with its role as a stem cell marker. Our recently published work has given evidence of the molecular pathways that seem to control the expression of K15 in undifferentiated and differentiated cells. In this article, we have critically reviewed the published work to establish the reliability of K15 as an epidermal stem cell marker.