Synthesis of an AlN Polycrystalline Bulk Layer and Nanotubes by Using NH3 and Bi

A bulk layer of aluminum nitride (AlN) polycrystals was synthesized on a boron nitride crucible surface by heating Al chunks with 5 mol% of bismuth at 1273 K for 3 h under NH₃ gas flow. The fragments of the layer were characterized by X-ray diffraction, scanning electron microscopy, and transmission electron microscopy. The platelet grains of AlN with a size of 0.1–1.0 μm and having preferred orientation of the c -axis perpendicular to the layer were formed at the crucible side. Nanotubes 6–15 μm long and about 20–100 nm thick grew on the gas phase side of the layer.     

Diffusion-limited characteristics of mechanically induced currents in polypyrrole/Au-membrane composites

A mechanically induced current (MIC) in a polypyrrole/Au-coated membrane (PPy/Au-membrane) composite with various surface morphologies was investigated, and the electrolyte conditions were determined in an electrochemical cell. A MIC was induced on porous PPy/Au-membranes with a thin layer of PPy. Conversely, relatively small MICs were observed in non-highly porous films such as freestanding films and PPy/Au-membranes with thick PPy deposits. A MIC smaller by one order of magnitude was also observed in a Au-membrane without PPy. These results indicated that the MICs was due to a charging phenomenon in both the redox and the double layer capacitances. The MIC also varied with supporting electrolyte and their concentration. The MIC was strongly reduced in solutions with diluted electrolytes and with bulky cationic electrolytes, indicating that the number and the penetration speed of mobile ions limited the magnitude of the MIC. These characteristics indicated that the MIC was essentially a diffusion limited current. A two-electrode MIC cell was also configured to investigate a power generation film in a normal saline solution, which can possibly be utilized for biomedical applications.     

Programmed High‐Hole‐Mobility Supramolecular Polymers from Disk‐Shaped Molecules

In this paper a simple, casting solution technique for the preparation of two‐dimensional (2D) arrays of very‐high molecular weight (MW) 1D‐Pc supramolecular inorganic polymers is described. The soluble fluoroaluminium tetra‐tert‐butylphthalocyanine (ttbPcAlF) is synthesized and characterized, which can be self‐assembled to form 2D arrays of very‐high‐MW 1D‐Pc supramolecular inorganic polymers. High‐resolution transmission electron microscopy (HRTEM) demonstrates that the 1D‐ttbPcAlF, having a cofacial ring spacing of ～0.36 nm and an interchain distance of ～1.7 nm, self‐assembles into 2D‐nanosheets (～140 nm in length, ～20 nm in width, and equivalent to MW of 3.2 × 10⁵ g mol^?1). The film cast from a 1,2‐dichloroethane (DCE) solution shows a minimum hole‐mobility of ～0.3 cm² V^?1 s^?1 at room temperature by flash‐photolysis time‐resolved microwave conductivity (TRMC) measurements and a fairly high dark dc‐conductivity of ～1 × 10^?3 S cm^?1.     

Magnetic properties and phase diagram of Ni50Mn50−xGax ferromagnetic shape memory alloys

We present the magnetic properties and the magnetic phase diagram of Ni₅₀Mn_50?xGa_x ferromagnetic shape memory alloys across a wide concentration range. Martensitic transformation, intermediate transformation, B2–L2₁ order–disorder transformation, Néel and Curie temperatures are determined for the prepared samples. The martensitic transformation temperature decreases with increasing Ga concentration and bends two times when crossing the Curie temperature and the intermediate-phase transformation temperature. Spontaneous magnetization and its composition dependence were also investigated. Composition dependence of the transformation temperatures and the spontaneous magnetization in the martensite phase of Ni₅₀Mn_50?xGa_x are compared with those of Ni₅₀Mn_50?xIn_x and Ni₅₀Mn_50?xSn_x, revealing a similarity in the NiMn-based alloy systems.     

Selective oxidation of alcohols using novel crystalline Mo-V-O oxide as heterogeneous catalyst in liquid phase with molecular oxygen

Catalytic selective oxidation of benzyl alcohol with molecular oxygen under mild conditions was carried out over novel crystalline Mo-V-O oxide. The present research is focused on investigation of recycling, reusability and stability of the crystalline oxide in the liquid-phase reaction. The Mo-V-O oxide catalyst was used at least four times with comparable activities to that of fresh catalyst. The separation of the catalyst from reaction medium can stop the conversion of benzyl alcohol, and the addition of the catalyst to the reaction medium can trigger the reaction immediately. The catalytic oxidation of 2,3,6-trimethylphenol as a reference reaction suggested that there were no leached active species in the reaction mixture. The results of the ICP–MS analysis, XRD, and SEM characterization confirmed that the structure and composition of the catalyst were stable. Besides, the Mo-V-O oxide can catalyze the oxidation of a series of alcohols with high selectivities for corresponding carbonyl compounds.     

Purification, characterization, and sequence determination of phospholipase D secreted by Streptoverticillium cinnamoneum

Phospholipase D (PLD), secreted into the culture medium of an actinomycete, Streptoverticillium cinnamoneum, has been purified to homogeneity and characterized. The Stv. cinnamoneum PLD efficiently catalyzes both the hydrolysis and transphosphatidylation of various phospholipids, including phosphatidylethanolamine (PE), phosphatidylcholine (PC), and phosphatidylserine (PS). However, the substrate specificity differs between the two reactions; PE serves as the most preferred substrate for the hydrolysis, but PC and PS are better substrates than PE for the transphosphatidylation. In addition, the transphosphatidylation but not the hydrolysis of PE and PC is markedly activated on the addition of metal ions, especially Al3+. Nucleotide and amino acid sequence determination of the Stv. cinnamoneum PLD revealed the presence of common structural motifs identified in all PLD sequences from various species.     

Follicular dendritic cell tumor of the mesentery

Follicular dendritic cell (FDC) tumor is an exceedingly rare malignant neoplasm and occurs mainly in the cervical lymph nodes. We report a mesenteric FDC tumor occurring in a 66-year-old female, that manifested with intraabdominal multifocal recurrence 7 years after resection of the primary tumor. Histologically, both primary and recurrent tumors were composed of oval to spindle cells with paley eosinophilic cytoplasms, indistinct cell borders, round to elongated nuclei with clear or finely dispersed chromatin, and medium to large nucleoli. Characteristically, the tumor cells were growing in sheets, fascicles, and sometimes in whorls and a storiform pattern. In addition, focal necrosis, nuclear pleomorphism and abnormal mitoses were also observed. The neoplastic cells were intimately admixed with small lymphocytes. The diagnosis was confirmed by positive immunoreactivity with CD21 and CD35 antibodies and by ultrastructural demonstration of convoluted interdigitating cell processes connected by scattered desmosome-like junctions. Although our case showed a low proliferative activity evaluated by MIB-1, multifocal recurrence has occurred. The clinicopathologic features and differential diagnosis of FDC tumors are discussed with the review of the literature.     

Framework for Performance-Based Design of Building Structures

Abstract:   This article proposes a new framework for performance-based design (PBD) of building structures. This framework was proposed under the 3-year Japanese Government Comprehensive Research and Development Project on "Development of a New Engineering Framework for Building Structures" launched in the fiscal year of 1995. The primary objective of the project is to create a system in which the performance of buildings is clearly stated, and consumers, that is, occupants, are well informed of how their buildings will perform and how much it will cost to maintain their performance. The framework emphasizes the establishment of target performance, the performance evaluation, and the performance statement as the main three elements. It also stresses that an institutional framework and support systems need to be provided to enable PBD to be practiced efficiently. The implementation of the proposed framework is also expected to promote engineering innovation, progress in building engineering, and globalization. The new framework will also bring other benefits, such as improved design techniques, greater design flexibility, and international harmonization. It is also important for building structural performance to become one of the most important indexes for consumers to define a building's value. The Japanese building code was changed to the performance-based code, based in the clear and comprehensive manner proposed in this article. In the United States, "Vision 2000" ( SEAOC, 1995 ) was published, then many research activities were conducted simultaneously.     

Cloning and characterization of cDNAs encoding S-RNases from almond (Prunus dulcis): primary structural features and sequence diversity of the S-RNases in Rosaceae

The ability of histamine H3 receptor ligands to interact with 5-HT3 receptors in NG108-15 cells was studied using the whole cell patch clamp recording technique. Imetit, a histamine H3 receptor agonist, generated inward currents and exhibited weak partial agonist activity at the 5-HT3 receptor (EC50 = 11.8 microM). Imetit-induced currents were slow to desensitize and at a high concentration reduced in size. The histamine H3 receptor antagonists iodophenpropit and thioperamide did not generate inward currents but were able to inhibit 5-hydroxytryptamine (5-HT) responses with an IC50 of 1.57+/-0.3 microM and 13.7+/-3.5 microM, respectively. Thioperamide is probably a non-competitive antagonist which may have more than one binding site on the receptor.