Accelerated wear testing with a microfabricated surface to evaluate the lubrication ability of biomolecules on polyethylene

Wear of ultrahigh‐molecular‐weight polyethylene (UHMWPE) and wear‐particle‐induced osteolysis and bone resorption are the major factors causing the failure of total joint replacements. It is feasible to improve the lubrication and reduce the wear of artificial joints. We need further understanding of the lubrication mechanism of the synovial fluid. The objective of this study is to evaluate the lubricating ability of three major components in the synovial fluid: albumin, globulin, and phospholipids. An accelerated wear testing procedure in which UHMWPE is rubbed against a microfabricated surface with controlled asperities has been developed to evaluate the lubrication behavior. An analysis of the wear particle dimensions and wear amount of the tests has provided insights for comparing their lubrication performance. It is concluded that the presence of biomolecules at the articulating interface may reduce friction. A higher concentration of a biological lubricant leads to a decrease in the wear particle width. In addition, in combination with the wear results and mechanical analysis, the roles of individual biomolecules contributing to friction and wear at the articulating interface are discussed. These results can help us to identify the role of the biomolecules in the boundary lubrication of artificial joints, and further development of lubricating additives for artificial joints may be feasible. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Towards a new definition of EPOC parameters for anionic electrochemical catalysts: case of propene combustion

The electrochemical promotion of catalysis (EPOC) of propene combustion was investigated using Pt sputtered thin film on an O²⁻ conductor, 8 mol% Y₂O₃-stabilized-ZrO₂ (YSZ). In order to separate the influence of the thermal migration of the O²⁻ oxide ions from the electrolyte to the catalyst surface and the impact of an electrical polarization on the catalytic activity, several light-off experiments (cool down and heat up procedures) were successively performed under different polarizations, i.e. OCV, +2 and −2 V. These experiments have clearly shown that the presence of O²⁻ (thermally or electrochemically induced) inhibits the catalytic activity of the platinum for the propene deep oxidation. These results demonstrate the importance to define a normalized rate enhancement ratio, ρ _n , from a reference value of the catalytic rate corresponding to a Pt surface state free of O²⁻ ions.     

A strategy for the electro-organic synthesis of new hydrocaffeic acid derivatives

Electrochemical treatment processes can significantly contribute to the protection of the environment through the minimization of waste and toxic materials in effluents. From a pharmaceutical point of view and due to the existing resemblance between the electrochemical and biological reactions, it can be assumed that the oxidation mechanisms on the electrode and in the body share similar principles. In this paper, the application of electrochemical studies in the design of an environmentally friendly method was delineated for the new hydrocaffeic acid (HCA, 3,4-dihydroxy hydrocinnamic acid) derivatives synthesis at carbon electrodes in an undivided cell. In this cell, the EC mechanism reaction was involved, comprising two steps alternatively; (1) electrochemical oxidation and (2) chemical reaction. In particular, the electro-organic reactions of HCA, an important biological molecule, were studied in a water–acetonitrile (90:10 v/v) mixture in the presence of benzenesulfinic acid (3) and p-toluenesulfinic acid (4). The research included the use of a variety of experimental techniques, such as cyclic voltammetry, controlled-potential electrolysis and product spectroscopic identification.     

NiCoFe/C cathode electrocatalysts for direct ethanol fuel cells

A direct ethanol fuel cell (DEFC), which is less prone to ethanol crossover, is reported. The cell consists of PtRu/C catalyst as the anode, Nafion^® 117 membrane, and Ni–Co–Fe (NCF) composite catalyst as the cathode. The NCF catalyst was synthesized by mixing Ni, Co, and Fe complexes into a polymer matrix (melamine-formaldehyde resins), followed by heating the mixture at 800 °C under inert atmosphere. TEM and EDX experiments suggest that the NCF catalyst has alloy structures of Ni, Co and Fe. The catalytic activity of the NCF catalyst for the oxygen reduction reaction (ORR) was compared with that of commercially available Pt/C (CAP) catalyst at different ethanol concentrations. The decrease in open circuit voltage (V_oc) of the DEFC equipped with the NCF catalysts was less than that of CAP catalyst at higher ethanol concentrations. The NCF catalyst was less prone to ethanol oxidation at cathode even when ethanol crossover occurred through the Nafion^®117 film, which prevents voltage drop at the cathode. However, the CAP catalyst did oxidize ethanol at the cathode and caused a decrease in voltage at higher ethanol concentrations.     

The effect of ionic interaction on the miscibility and crystallization behaviors of poly(ethylene glycol)/poly(L‐lactic acid) blends

The effect of end groups (2NH₂) of poly(ethylene glycol) (PEG) on the miscibility and crystallization behaviors of binary crystalline blends of PEG/poly(L ‐lactic acid) (PLLA) were investigated. The results of conductivity meter and dielectric analyzer (DEA) implied the existence of ions, which could be explained by the amine groups of PEG gaining the protons from the carboxylic acid groups of PLLA. The miscibility of PEG(2NH₂)/PLLA blends was the best because of the ionic interaction as compared with PEG(2OH, 1OH‐1CH₃, and 2CH₃)/PLLA blends. Since the ionic interaction formed only at the chain ends of PEG(2NH₂) and PLLA, unlike hydrogen bonds forming at various sites along the chains in the other PEG/PLLA blend systems, the folding of PLLA blended with PEG(2NH₂) was affected in a different manner. Thus the fold surface free energy played an important role on the crystallization rate of PLLA for the PEG(2NH₂)/PLLA blend system. PLLA had the least fold surface free energy and the fast crystallization rate in the PEG(2NH₂)/PLLA blend system, among all the PEG/PLLA systems studied. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

新建工科院校应用型工程教育探讨

黑龙江工程学院是一所新建工科院校,是世纪之交一批由高工专升本的教学型工科院校之一.这批工科院校的产生是在我国经济快速发展、高等教育进入大众化阶段的社会历史背景下,高等工程教育新的结构调整和分工.可以说,这一类型的工科院校不应是原来专科的简单放大和拓展,也不应盲目攀高进行脱胎换骨的改造,更不能亦步亦趋地模仿跟踪现有本科院校模式,其新的职能和定位是应用型工程本科教育.如何开展应用型工程教育,这是新建工科院校一直努力探讨和实践的课题.本文结合黑龙江工程学院的办学实践,对应用型工程教育问题作一点粗浅的探讨.     

真空蒸馏脱硒的研究

本文从理论上分析了真空蒸馏脱Se的影响因素时间和温度,并通过实验给予验证,提出了最佳条件,对工业采用真空蒸馏脱出含Se物料中的Se具有一定的指导性。     

Grain size dependence of the activation parameters for plastic deformation: Influence of crystal structure,slip system,and rate-controlling dislocation mechanism

A critical review of available results on the dependence of grain size on the activation parameters for deformation, specifically, the activation volume, V*, and the thermal component of flow stress, σ*, has been carried out with a view to verifying the Armstrong prediction that identifies the Hall-Petch (H-P) intercept with the easy slip system and the H-P slope with the most difficult system in polycrystals. The influence of slip system choice is demonstrated using results on Cd and Zr. The Armstrong prediction is valid for basal slip hcp metals, such as Cd and Zn, with V* and σ* determined by the difficult pyramidal slip. For the prism slip metals such as Zr and Ti, V* and σ* are controlled by interstitial solutes and are independent of grain size. The results on Zr are used to highlight the influence of dynamic strain aging on the H-P parameters. In bcc metals, in which the Peierls-Nabarro barrier is the rate-controlling obstacle, V* and σ* are again independent of grain size. For fcc metals, correlation of the H-P slope with the cross-slip stress, predicted by the Armstrong model, has been demonstrated for a few cases. The variation of V* with grain size in Ni as reported by Narutani and Takamura (Acta Metall. Mater., 1991, vol. 227, pp. 2037–49) is newly interpreted in terms of the Armstrong model that associates the H-P intercept in fcc metals with dislocation intersections and the H-P slope with cross-slip, and provides realistic results for the activation volumes for the two processes. This article is based on a presentation given in the symposium “Dynamic Deformation: Constitutive Modeling, Grain Size, and Other Effects: In Honor of Prof. Ronald W. Armstrong,” March 2–6, 2003, at the 2003 TMS/ASM Annual Meeting, San Diego, California, under the auspices of the TMS/ASM Joint Mechanical Behavior of Materials Committee.     

Instrumental characterization of clay by XRF,XRD and FTIR

Instrumental characterizations of the clay were performed by different techniques such as XRF, XRD and FTIR. XRF shows the chemical compositions of the clay where Al-oxide and silica oxide are present in major quantity whereas XRD confirms the presence of these minerals in clay. FTIR studies show the presence of quartz, alumina, haematite and different mineral matters.     

钛硅分子筛催化环己酮氨肟化反应过程--本征动力学

对钛硅分子筛(HTS)催化环己酮氨肟化反应本征动力学进行了研究。利用经验方程拟合了试验数据，并采用Marquardt算法对经验方程的参数进行确定，获得了不同试验条件下的反应初速率，然后再用高斯-牛顿法对本征动力学模型进行了参数估计，得出了氨肟化反应以及该反应体系中H2O2分解的本征动力学。并对该模型进行了残差分析和F检验，对氨肟化反应和H2O2分解的动力学模型的计算值与试验值进行了比较，获得相对误差绝对值的平均值分别为5．21％和6．25％。表明该模型能真实反映HTS催化环己酮氨肟化的反应特性，是合理可靠的，能为进一步的过程开发与工程设计提供一些理论上的指导和设计上的依据；而H2O2分解副反应动力学模型仅适用于该反应体系。