Extracting dust from soil: a simple solution to a tricky task

Air quality is commonly assessed by the ambient concentration of airborne particles sized smaller than 10 microm (PM10). However, in addition to concentration, particle shape as well as the type and bioaccessibility of elements adsorbed to this particulate fraction are likely to be related to subsequent respiratory health effects. In order to investigate this relationship, a relatively large mass of the relevant size fraction is needed since sample preparation is necessary prior to analysis. Most existing methods for sampling dust have been developed for analysing the dust directly, without prior handling or digestion. In order to provide sufficient material to be used for subsequent bioaccessibility analysis, these methods require repetitive and time consuming sampling as well as special equipment and procedures which are high in both cost and maintenance. This paper describes an inexpensive and relatively simple procedure for extracting the PM10 fraction from soil to be used for lung bioaccessibility studies. The method described involves dry and wet sieving in order to exclude larger size fractions as far as possible. Vacuum filtering of the wet-sieved soil solution through a 10 microm mesh was then employed to extract the required fraction. In order to avoid frequent blocking of the mesh, Stokes's law was applied in the construction of a tube which enables separation of the solution holding the smallest fraction.     

Recycled water: potential health risks from volatile organic compounds and use of 1,4-dichlorobenzene as treatment performance indicator

Characterisation of the concentrations and potential health risks of chemicals in recycled water is important if this source of water is to be safely used to supplement drinking water sources. This research was conducted to: (i) determine the concentration of volatile organic compounds (VOCs) in secondary treated effluent (STE) and, post-reverse osmosis (RO) treatment and to; (ii) assess the health risk associated with VOCs for indirect potable reuse (IPR). Samples were examined pre and post-RO in one full-scale and one pilot plant in Perth, Western Australia. Risk quotients (RQ) were estimated by expressing the maximum and median concentration as a function of the health value. Of 61 VOCs analysed over a period of three years, twenty one (21) were detected in STE, with 1,4-dichlorobenzene (94%); tetrachloroethene (88%); carbon disulfide (81%) and; chloromethane (58%) most commonly detected. Median concentrations for these compounds in STE ranged from 0.81 μg/L for 1,4-dichlorobenzene to 0.02 μg/L for carbon disulphide. After RO, twenty six (26) VOCs were detected, of which 1,4-dichlorobenzene (89%); acrylonitrile (83%) chloromethane (63%) and carbon disulfide (40%) were the more frequently detected. RQ(max) were all below health values in the STE and after RO. Median removal efficiency for RO was variable, ranging from −77% (dichlorodifluoromethane) to 91.2% (tetrachloroethene). The results indicate that despite the detection of VOCs in STE and after RO, their human health impact in IPR is negligible due to the low concentrations detected. The results indicate that 1,4-dichlorobenzene is a potential treatment chemical indicator for assessment of VOCs in IPR using RO treatment.     

Automating mode detection for travel behaviour analysis by using global positioning systemsenabled mobile phones and neural networks

Travel surveys collect trip data such as origin, destination, mode, duration, distance and purpose of trips, as well as socioeconomic and demographic data for analysis. Transportation planners, policymakers, state departments of transportation, metropolitan planning organisations, industry professionals and academic researchers use survey data to better understand the current demand and performance of the transportation infrastructure, and to plan in preparation for future growth. Next-generation travel surveys will utilise global positioning systems (GPS) to collect trip data with minimal input from survey participants. Owing to their ubiquity, GPS-enabled mobile phones are developing into a promising survey tool. TRAC-IT is a mobile phone application that collects real-time GPS data and requires minimal input from the user for data such as trip purpose, mode and vehicle occupancy. To ease survey burden on participants and enable real-time, modespecific location-based services, new techniques must be explored to derive more information directly from GPS data. As part of travel survey collection, TRAC-IT is able to passively determine trip mode using GPSenabled mobile phones and neural networks. The mode detection technique presented in this article can be optimised using a critical point, pre-processing algorithm to reduce the size of required GPS datasets obtained from GPS-enabled mobile phones, thus reducing data collection costs while conserving precious mobile phone resources such as battery life.     

Kinetic features of optically stimulated luminescence in aluminum nitride powder

Room-temperature optically stimulated luminescence (OSL) response in UV-irradiated aluminum nitride (AlN) powders has been studied. Excitation of AlN powder by UV photons with energies within 3–5 eV gives rise to an intense afterglow that is related to isothermal quenching of recombination processes involving shallow donor centers. It is established that a useful OSL response separated on the background of this recombination afterglow represents a superposition of two components with decay kinetics order b = 1.0–1.2 and 1.7–2.1. Superlinear UV-dose dependences of the OSL light sum have been measured and the corresponding coefficients for each component have been analyzed in comparison to the available published data.     

Use of statistical checks as maintenance tools for TLD readers

Although the values of different parameters may remain within permissible limits during the operation of a thermoluminescent dosemeter (TLD) reader, certain effects can become apparent only when a long-term followup of these parameters is performed. In order to ensure an accurate and reliable operation of a TLD reader, the system characteristics must be monitored continuously. Long-term statistical checks of key system parameters may give a broader insight into the operational characteristics of the TLD reader and may help for proper maintenance of the system. The photomultipliers noise, the internal reference light source stability and the A to D reference voltage were found to be critical parameters, which have a major influence on the accuracy and stability of the system. A followup of these parameters for a period of about 10 y is presented, and some problems are seen to be reflected in the distributions.     

Hypercalcemia during pulse vitamin D3 therapy in CAPD patients treated with low calcium dialysate: the role of the decreasing serum parathyroid hormone level

Oral pulse therapy with vitamin D is effective in suppressing parathyroid hormone (PTH) secretion in continuous ambulatory peritoneal dialysis patients with secondary hyperparathyroidism (2'hpt). However, this treatment often leads to hypercalcemia. The goals of the study were: (1) to examine whether the incidence of hypercalcemia decreases when dialysate calcium is reduced from 1.25 to 1.0 mmol/L; (2) to determine the relative role of the factors involved in the pathogenesis of hypercalcemia; and (3) to study the efficacy of a low oral pulse dose of alfacalcidol in preventing the recurrence of 2'hpt. Fourteen continuous ambulatory peritoneal dialysis patients with 2'hpt were treated with pulse oral alfacalcidol and calcium carbonate and dialyzed with a 1.0-mmol (n = 7) or a 1.25-mmol (n = 7) dialysate calcium. The response rate (87%) and the incidence (71%) and severity of hypercalcemia were similar in both groups. In the early response stage, PTH decreased by 70% in both groups, and serum ionized calcium (iCa) increased from 1.18 +/- 0.02 to 1.27 +/- 0.04 mmol/L (P < 0.005) in the 1.0 group and from 1.19 +/- 0.02 to 1.29 +/- 0.02 mmol/L in the 1.25 group (P < 0.005). Nine of the 12 responders had a further decrease in serum PTH, which was associated with an additional increase in iCa from 1.28 +/- 0.02 to 1.47 +/- 0.04 (P < 0.005). Multivariate analysis showed that the early increase in iCa was positively correlated with alfacalcidol dosage (r = 0.69). In contrast, the late increase in iCa was mostly accounted for by the decrease in serum PTH (r = -0.93). This occurred while calcium carbonate, alfacalcidol dosage, and serum 1,25 hydroxy D3 remained unchanged compared with the early response stage. Finally, an alfacalcidol dose of 1 microg twice weekly was unable to maintain serum PTH at an adequate level in the long term. These data show that a reduction in dialysate calcium from 1.25 to 1.0 mmol does not reduce the occurrence of hypercalcemia and suggest that lowering serum PTH reduces the ability of the bone to handle a calcium load within a few weeks, thus causing hypercalcemia.     

Effect of brain, body, and magnet bore temperatures on energy metabolism during global cerebral ischemia and reperfusion monitored by magnetic resonance spectroscopy in rats

To record brain temperature for comparison with rectal and temporalis muscle temperatures in preliminary studies before MR spectroscopy experiments, a thermistor was inserted into the basal ganglia in eight anesthetized, ventilated, and physiologically monitored rats. The rats were placed in an MR spectrometer and subjected to 60 min of global cerebral ischemia and 2 h of reperfusion without radiofrequency (RF) pulsing. Body temperature was maintained at 37.5-38.0 degrees C (normothermia) or 36.5-37.0 degrees C (mild hypothermia). Brain temperature during ischemia, which dropped to 31.9 +/- 0.3 (hypothermia) and 33.6 +/- 0.5 degrees C (normothermia), correlated with temporalis muscle temperature (r2 = 0.92) but not with body or magnet bore temperature measurements. Ischemia reduced brain temperature approximately 1.7 degrees C in rats subjected to mild hypothermia (1 degree reduction of body temperature). Parallel MR spectroscopy experiments showed no significant difference in energy metabolites between normothermic and hypothermic rats during ischemia. However, the metabolic recovery was more extensive 20-60 min after the onset of reperfusion in hypothermic rats, although not thereafter (P < 0.05). Mild hypothermia speeds metabolic recovery temporarily during reperfusion but does not retard energy failure during global ischemia in rats.