Broadband system to increase bitrate in train communication networks

MVB (Multifunction Vehicle Bus), defined in IEC 61375, has been broadly adopted as the communication standard between embedded control systems on-board modern trains. In this work a new method to take advantage of the full bandwidth of the channel using an OFDM technique is described. With this new method it is possible to share the physical medium between standard MVB traffic and new OFDM traffic. A 90 Mbps theoretical bitrate can be achieved. The results of this work have been validated in a test bench including standard MVB nodes transmitting on a line similar to a real vehicle bus.     

Differential evolution solution to the SLAM problem

A new solution to the Simultaneous Localization and Modelling problem is presented in this paper. The algorithm is based on the stochastic search for solutions in the state space to the global localization problem by means of a differential evolution algorithm. This non linear evolutive filter, called Evolutive Localization Filter (ELF), searches stochastically along the state space for the best robot pose estimate. The set of pose solutions (the population) focuses on the most likely areas according to the perception and up to date motion information. The population evolves using the log-likelihood of each candidate pose according to the observation and the motion errors derived from the comparison between observed and predicted data obtained from the probabilistic perception and motion model.The proposed SLAM algorithm operates in two steps: in the first step the ELF filter is used at local level to re-localize the robot based on the robot odometry, the laser scan at a given position and a local map where only a low number of the last scans have been integrated. In the second step, the aligned laser measures and the corrected robot poses are used to detect whether the robot is revisiting a previously crossed area (i.e., a cycle in the robot trajectory exists). Once a cycle is detected, the Evolutive Localization Filter is used again to estimate the accumulated residual drift in the detected loop and then to re-estimate the robot poses in order to integrate the sensor measures in the global map of the environment.The algorithm has been tested in different environments to demonstrate the effectiveness, robustness and computational efficiency of the proposed approach.     

Activity recognition and intensity estimation in youth from accelerometer data aided by machine learning

Physical activity monitoring for youth is an area of increasing scientific and public health interest due to the high prevalence of obesity and downward trend in physical activity. However, accurate assessment of such activity remains a challenging problem because of the complex nature in which certain activities are performed. In this study, we formulated the issue as a machine learning problem—using a diverse set of 19 physical activities commonly performed by youth—via two approaches: activity recognition and intensity estimation. With the aid of training data, we implemented a distance metric learning method called DML-KNN that utilizes time-frequency features and is capable of effectively classifying both continuous and intermittent movement in youth subjects. Four different time-frequency feature extraction methods were then systematically evaluated. Our results show that the DML-KNN method performed competitively, especially when using features extracted by the Tamura method for intensity estimation, and by the Square Coefficient method for activity recognition.     

Efficient identity-based online/offline encryption and signcryption with short ciphertext

The technique of online/offline is regarded as a promising approach to speed up the computation of encryption, because the most part of computation, such as pairing over points on elliptic curve and exponentiation in groups, can be pre-computed in the offline phase without knowing the message to be encrypted and/or recipient’s identity. The online phase only requires light computation, such as modular multiplication. In this paper, we propose two novel identity-based online/offline schemes: a full secure identity-based online/offline encryption scheme and an identity-based online/offline signcryption scheme. Compared to the other schemes in the literature, our schemes achieve the shortest ciphertext size in both offline and online phases and demonstrate the best performance in offline computation. Our schemes are applicable to devices with limited computation power. They are proven secure in the random oracle model.     

ADSL传输技术概述

介绍ADSL传输技术使用情况及与ISDN等的比较。     

Fracture morphology and mechanical properties of thermocatalytically polymerized MMA-impregnated mortar

Mortar mixes with different water-cement ratios and consistency were impregnated with methyl-methacrylate monomer and polymerized thermally under water using the free radical initiator, -azobis (isobutyronitrile). Results on drying, impregnation and polymerization are presented. It is shown that a considerable amount of polymer remained strongly adhered or chemically inserted in the inorganic matrix. The molecular weight of the inserted polymer is higher than that obtained in the solvent extracted polymer and this is also higher than the polymer molecular weight obtained by bulk polymerization under the same conditions. The compressive and flexural strength of the impregnated mortar were found to be a function of the amount of polymer in the composites. Fracture behaviour under load, and polymer distribution inside the composites were examined by scanning electron microscopic techniques (SEM). It was observed that the polymer acts in two ways, first as a filler of porous and microcrack voids, secondly forming an anisotropic irregular network improving the bond characteristic of the interface between aggregate and matrix. Furthermore, due to the the adhesion of the polymer to both phases, it acts as a reinforcement and improves the mechanical properties, in particular the flexural strength.     

对油水乳浊液分离的研究

本文主要研究了操作条件的改变对分离效果的影响，在研究中还考察了NaCl和絮凝剂加入乳浊液后对分离过程产生的增效作用。得到了一个与实验数据相关联的数学方程，为估算油的去除率提供了一个有用的工具。在电浮选装置中采用不溶电极，为今后的分离技术提供了一个新思路。     

Iterative ultrasonic signal and image deconvolution for estimation of the complex medium response

The ill‐conditioned inverse problem of estimating ultrasonic medium responses by deconvolution of RF signals is investigated. The primary difference between the proposed method and others is that the medium response function is assumed to be complex‐valued rather than restricted to being real‐valued. Derived from the complex medium model, complex Wiener filtering is presented, and a Hilbert transform related limitation to inverse filtering type methods is discussed. We introduce a nonparametric iterative algorithm, the least squares method with point count regularization (LSPC). The algorithm is successfully applied to simulated and experimental data and demonstrates the capability of recovering both the real and imaginary parts of the medium response. The simulation results indicate that the LSPC method can outperform Wiener filters and improve the resolution of the ultrasound system by factors as high as 3.7. Experimental results using a single element transducer and a conventional medical ultrasound system with a linear array transducer show that despite the errors in pulse estimation and the noise in the RF signals, excellent results can be obtained, demonstrating the stability and robustness of the algorithm. © 2006 Wiley Periodicals, Inc. Int J Imaging Syst Technol, 15, 266–277, 2005     

科技项目统计信息系统的设计与实现

根据科技项目情况统计涉及的统计表类型繁多 ,要求统计数字准确、图表精美的特点 ,设计了一个由2 2个关联的表构成的科技项目统计关系数据库 ,对全省每年的科技项目进行各种统计、绘制统计图表 ,并介绍了VFP与 EXCEL间的通信 ,VFP生成图表等几个实现重点