广义物质平衡计算在凝析气藏开采动态预测中的应用

从经济的角度考虑 ,对小型凝析气藏衰竭式开采动态的预测往往不必或不值得进行数值模拟研究。常规物质平衡 (黑油 )计算方法只局限于黑油和干气藏 ,应用于凝析气藏则存在很大的误差。Walsh提出的广义物质平衡计算方法 ,可用于包括黑油、干气藏、挥发油气藏和凝析气藏在内的所有油气藏。文中将一个小型凝析气藏衰竭式开采动态的数值模拟结果与广义物质平衡计算结果进行了对比 ,结果表明 ,Walsh方法简便、应用更广泛 ,可用于规模较小、不适合进行数值模拟研究的凝析气藏的现场开发优化。     

镀锌层银盐黑色钝化工艺

在含ＡｇＮＯ３０．５～１ｇ／Ｌ，ＣｒＯ３５～１０ｇ／Ｌ，Ｈ２ＳＯ４０．５～１ｍｌ／Ｌ，光泽控制剂１０～２５ｍＬ／Ｌ的钝化液中处理镀锌层，可获得结合力良好、光亮的黑色钝化膜。     

全双极WTA模型的改进及其实现

提出了一种相似度的新定义，使双极ＷＡＴ模型的实现更加简洁明了。增加一个阈值使系统能判别非存储模式或因其信息量过低而无法鉴定的输入模式，阈值的大小与要求的容错能力有关。双极相似度及阈值通过光学方法实现。阈值的光学实现使系统仍具有照明不变性。通过电路实现取及ＷＴＡ网络的迭代运算。     

GaAs／AlGaAs多量子阱红外探测器的光电流谱

测量了ＧａＡｓ／ＡｌＧａＡｓ多量子阱红外探测器在零偏压、小偏流和大偏压等条件下的光电流谱，并结合理论计算的光跃迁能量讨论了光电流谱的多峰结构和异常增强特性。     

IPA模型对Hopfield模型神经网络的改进

考虑Ｈｏｐｆｉｅｌｄ模型中假态之间的布尔逻辑关系，提出利用ＩＰＡ模型对神经网络中的假态进行抑制，并和原网络的性能进行了比较，结果表明：改进后的网络性能比Ｈｏｐｆｉｅｌｄ模型和ＩＰＡ模型均有较大提高。     

有源OTA─C高通滤波器

本文提出了一种实现高通滤波特性的高阶ＯＴＡ－Ｃ滤波器，其实验结果和理论分析相一致。     

ANALYSIS AND PROCESSING OF LMF－COSTAS STEPPED FREQUENCY RADAR SIGNAL

Linear Modulated Frequency (LMF) Costas Stepped Frequency Radar (SFR) signal is introduced. Its ambiguity function is derived and analyzed in detail and its feasibility is validated in theory. The scheme of the proposed signal processing is also presented. The results of theoretic analysis and simulation show that, by using the proposed signal and increasing the bandwidth of the total stepped frequency, the ambiguity sidelobe is well suppressed and the range-velocity coupling in the stepped frequency radar is also greatly weakened.     

模内贴箔装饰的自动化生产

详细介绍了一种新型装饰工艺－模内贴箔工艺的自动化过程及生产要求。     

Comments on “Multiphase systolic algorithms for spectraldecomposition” [and reply]

Comments that the paper by Liu and Yao (see ibid., vol.40, no.1, p.190, 1992) presented an efficient algorithm for spectral decomposition, but the parallel algorithm and architecture for the Hessenberg reduction has a problem. The matrix obtained from the unitary similarity transformation is not necessarily a Hessenberg matrix. The authors reply that the Hessenberg reduction described is not in the Hessenberg form. Only the first column is in its proper form. There are many ways to overcome such a problem. One simple way is to use the multiphase rectangular systolic array