漫射红外技术的智能家居无线局域网设计

分析了红外技术在短距离无线通信中的优势,并将其应用在智能家居局域网中;结合安华高科技公司的HSDL-3020红外收发模块搭建了硬件电路,构成网络的主从节点;介绍了网络组建的过程,包括IrDA协议栈结构、数据编码格式、链路连接、网络管理机制等。本设计实现了对家居设备的统一管理,具有较高的应用价值。     

Feedback predictive control for constrained fuzzy systems with Markovian jumps

In this paper, a feedback model predictive control method is presented to tackle control problems with constrained multivariables for uncertain discrete‐time nonlinear Markovian jump systems. An uncertain Markovian jump fuzzy system (MJFS) is obtained by employing the Takagi‐Sugeno (T‐S) fuzzy model to represent a discrete‐time nonlinear system with norm bounded uncertainties and Markovain jump parameters. To achieve more generality, the transition probabilities of the Markov chain are assumed to be partly unknown and partly accessible. The predictive formulation adopts an on‐line optimization paradigm that utilizes the closed‐loop state feedback controller and is solved using the standard semi‐definite programming (SDP). To reduce the on‐line computational burden, a mode independent control move is calculated at every sampling time based on a stochastic fuzzy Lyapunov function (FLF) and a parallel distributed compensation (PDC) scheme. The robust mean square stability, performance minimization and constraint satisfaction properties are guaranteed under the control move for all admissible uncertainties. A numerical example is given to show the efficiency of the developed approach. Copyright © 2011 John Wiley and Sons Asia Pte Ltd and Chinese Automatic Control Society     

A simple and cost-effective method for fabrication of integrated electronic-microfluidic devices using a laser-patterned PDMS layer

We report a simple and cost-effective method for fabricating integrated electronic-microfluidic devices with multilayer configurations. A CO₂ laser plotter was employed to directly write patterns on a transferred polydimethylsiloxane (PDMS) layer, which served as both a bonding and a working layer. The integration of electronics in microfluidic devices was achieved by an alignment bonding of top and bottom electrode-patterned substrates fabricated with conventional lithography, sputtering and lift-off techniques. Processes of the developed fabrication method were illustrated. Major issues associated with this method as PDMS surface treatment and characterization, thickness-control of the transferred PDMS layer, and laser parameters optimization were discussed, along with the examination and testing of bonding with two representative materials (glass and silicon). The capability of this method was further demonstrated by fabricating a microfluidic chip with sputter-coated electrodes on the top and bottom substrates. The device functioning as a microparticle focusing and trapping chip was experimentally verified. It is confirmed that the proposed method has many advantages, including simple and fast fabrication process, low cost, easy integration of electronics, strong bonding strength, chemical and biological compatibility, etc.     

实验室排课系统开发与使用

实验室是学生实践实验的必要场所,但是所有高校都会面临着实验室少,学生人数多,如何更好分配实验室的使用,是实验室管理人员值得考虑的首要问题。针对此问题,本院校实验室结合自己实验室的真实情况编写实验室排课系统。     

多媒体教学中的问题与对策

随着计算机技术及多媒体技术的发展,多媒体在教学中的应用越来越广泛,多媒体有着传统教学媒体不具备的独特优势,但在实际教学中也有不足之处,在教学中必须根据实际情况灵活运用多媒体才能取得理想的教学效果。     

Effect of Heat Treatment on Microstructure and Mechanical Properties of Extruded PM Ti–6Al–4V Alloy With Deformation Flowlines

Metallurgical and Materials Transactions A - Two heat treatments, namely 955°C/2h/AC (AC = air cooling) and 955°C/4h/FC (FC = furnace cooling), were carried out on...     

应变速率对中碳低温贝氏体钢强塑性的影响

摘要：为探索低温贝氏体钢的断裂行为,研究应变速率对低温贝氏体钢TRIP效应的影响,采用不同应变速率的拉伸试验对低温贝氏体钢的强塑性进行研究。利用扫描电镜（SEM）、透射电镜（TEM）及X射线衍射（XRD）等试验方法对低温贝氏体钢的微观组织、断口形貌及裂纹走向进行表征。结果表明,随着应变速率的提高,试验钢的屈服强度由771MPa上升至806MPa,抗拉强度由1554MPa上升至1606MPa,断后伸长率由13.5%下降至9.0%。主要原因是高应变速率拉伸引发的绝热温升抑制了残余奥氏体的马氏体相变,对试验钢塑性造成负面影响。     

SBTV铁电材料的制备和微观组织结构

采用固相反应法合成了SrBi2Ta2O9(简称SBT)和V掺杂SrBi2Ta2O9(简称SBTV)陶瓷,通过TG-DTA、XRD、SEM、TEM等技术手段研究了材料的烧结工艺、相组成和微观组织结构.研究表明V2O5是一种很好的助烧剂,掺杂后材料的烧结温度可降低200℃烧结后纯SBT均为单一的钙钛矿相SBT;掺杂后2种成型工艺所制备的SBTV除了生成少量Bi4(V2O11)外,仍主要由钙钛矿相组成;同时所有的材料都发生了一定程度的择优取向.掺杂后材料的晶粒形态发生变化棒状转化为片状.同时V掺杂后引起了晶格畸变,产生应变,SBTV材料在透射中观察到具有α-边界特征的90°畴.     

淀粉丙烯酸接枝共聚吸水性树脂的研究进展

基于淀粉丙烯酸接枝共聚作为吸水性树脂具有环保和可生物降解的优良特性 ,目前 ,人们普遍关注的是如何提高其吸水性 ,抗温性 ,控制水份释放 ,压力下保水 ,以及电解液的吸收等。这些特性的改进将使产品的用途更为广泛 ,可以预见 ,淀粉丙烯酸接枝共聚作为吸水性树脂具有广阔的应用和发展前景。     

Honey bees mating optimization algorithm for process planning problem

Process planning is a very important function in the modern manufacturing system. It impacts the efficiency of the manufacturing system greatly. The process planning problem has been proved to be a NP-hard problem. The traditional algorithms cannot solve this problem very well. Therefore, due to the intractability and importance of process planning problem, it is very necessary to develop efficiency algorithms which can obtain a good process plan with minimal global machining cost in reasonable time. In this paper, a new method based on honey bees mating optimization (HBMO) algorithm is proposed to optimize the process planning problem. With respect to the characteristics of process planning problem, the solution encoding, crossover operator, local search strategies have been developed. To evaluate the performance of the proposed algorithm, three experiments have been carried out, and the comparisons among HBMO and some other existing algorithms are also presented. The results demonstrate that the HBMO algorithm has achieved satisfactory improvement.