STM32和OV2640的嵌入式图像采集系统设计

基于STM32嵌入式系统及200万摄像头OV2640设计了图像采集系统,分析了系统的基本硬件架构,分别对不同模块的功能特点作出了简单的介绍;对系统的软件设计给出了详细的说明,介绍了系统初始化的基本思路和流程,以及相关外围设备模块在程序中的使用;并给出了系统的整体设计思路,实现了系统的稳定运行。     

工科专业复变函数与积分变换课程实践教学探析

讨论了如何在复变函数与积分变换课程中引入实践教学的方法,分析指出了目前工科专业复变函数与积分变换课程的教学内容存在的突出问题。提出在实际教学中应淡化理论推导及运算技巧,注重复变函数与积分变换课程的思想方法介绍及应用实例;压缩课堂教学时数,增加实践教学内容。     

Hot-compression behavior of Al-1Mn-1Mg alloy

The hot-compression of Al-1Mn-1Mg (mass fraction, %) alloy sample was carried out on a Gleeble-1500 thermo-simulator at deformation temperatures from 320 to 400 ℃ and strain rates from 0.1 to 10 s-1 by total strain of 1.4. Microstructure and texture evolution of the hot-compressed alloy were investigated by optical microscopy and X-ray diffraction analysis, respectively. The results show that the relationship among flow stress σ, deformation temperature T and strain rate ε can be expressed in the form of βσ...     

Numerical analysis on thermal regime in double-loop channel inductor

In order to investigate the temperature distribution, a three-dimensional finite element model (FEM) was developed to simulate the temperature regime in the channels of double-loop inductor, and the simulated results were compared with experimental data from low load trials of a 400 kW inductor. The results of numerical simulations, such as the temperature and Joule heating rate, show reasonable correlation with experimental data. The results indicate that Joule heating rate and the temperature reach the maximum at the corners and the minimum at the centre of the cross-section area. The temperature difference between the inlet and outlet is in an inverse proportion to mass transport. Joule heating rate and the temperature are directly proportional to power frequency. It is concluded that mass transport and power frequency play a critical role in determining the temperature regime and Joule heating rate, the relative permeability of the magnetic core shows no significant influence on temperature regime and Joule heating rate, when the relative permeability varies from 5 000 to 10 000.     

Air electrode supported manganese electrocatalysts for neutral electrolyte magnesium air cell

The catalysts of air electrode were prepared by sintering the active carbon loaded with manganese nitrate and potassium permanganate at 360 °C The air electrode was made up of a catalyst layer, a waterproof and gas-permeable layer, a current collecting substrate and a second waterproof and gas-permeable layer. The cell was assembled by the air electrode, pure magnesium anode and 10% NaCl solution used as electrolyte. The microstructures of air electrodes before and after discharging were characterized by SEM. The electrochemical behaviors of the air electrodes were determined by means of polarization curves, volt-ampere curves and constant current discharge curves. The polarization voltage of air electrode is—173 mV (vs SCE) at the current density of 50 mA/cm². The air electrodes exhibits good activity and stability in neutral electrolyte. The magnesium-air cell could work at 5 W for more than 7 h.     

再生混凝土内钢筋腐蚀速率的初步试验研究

在对再生混凝土内钢筋腐蚀速率的试验中,采用盐水浸泡以加速钢筋锈蚀,利用电化学线性极化法对普通混凝土与再生混凝土内钢筋腐蚀电流密度进行对比研究．考虑不同水灰比与再生骨料取代率的情况,得出在相同条件下,再生混凝土内钢筋腐蚀速度高于普通混凝土;随着水灰比的减小,再生混凝土内钢筋腐蚀速度减小;随着再生骨料取代率的提高,腐蚀速度加大．     

基于多层动态索引的相似炉型检索方法研究

针对炉型设计涉及的原始数据量庞大,合理炉型的界定范围广,界限模糊等问题,提出应用基于实例的推理方法辅助炉型初始方案的生成.分析了高炉炉型设计的特征属性,并建立了层次结构,针对其特征索引较多,权重系数小,检索效率低等问题,建立一种多层动态索引策略来改进传统的最近邻法,实现了炉型初始设计方案的智能生成.从而提高了相似实例检索的准确性和有效性,为后续对比调整提供了具有可比性和高参考价值的设计方案.     

有1的环R上的n元多项式的矩阵表示

定义了一类环P上矩阵环,并给出有1的环R上的n元多项式环的矩阵表示.     

Synthesis and characterization of CdS nanocrystals embedded on solid electrolyte films

In this article nano‐sized CdS crystal embedded in a PEO matrix was successfully prepared by a complex transformation method that is universal for preparing nanosized compounds containing transition metals. The size of embedded CdS particles was in the nanoscale from 2 to 10 nm determined by X‐ray diffusion. The nanosized CdS displayed the expected blue shift of the onset absorbance in the UV spectrum. The amount of blue shift depends upon the dipping time of the PEO–cadmium complex film in a sodium sulfide solution as well as its concentration. The most effective means for adjusting the size of CdS nanocrystals is to change the ratio of the oxygen along with the PEO chain to the cadmium ion in the complex film. The alkali salt in the film would contribute to the conductivity of the composite film. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 1263–1268, 2002; DOI 10.1002/app.10459     

改进鱼眼变换技术的图像适应

目的 为解决目前基于鱼眼变换技术的图像适应方法难以解决的焦点检测和多焦点冲突两大问题,提出一种基于改进鱼眼变换技术的图像适应方法。方法 提出的方法根据源图像的能量计算出图像中所有最优高能量线并组成高能量线集合,作为源图像的高能量部分,即图像的焦点区域;以能量线而不是传统的图像区域为单位进行鱼眼变换以得到目标图像。结果 改变鱼眼变换技术的变换模式并应用于图像适应中,实验结果表明,本文方法解决了基于鱼眼变换技术的图像适应方法存在的问题,通过本文算法所得到的目标图像具有较好的视觉效果,用户满意度接近4分。算法运行速度较快,将源图像(512×384)长度缩小一半的情况下仅需6 s的运算时间。结论 本文方法一方面保留了鱼眼变换图像适应方法的优势,在突出显示图像重要部分的同时,不会忽略图像的次要部分;另一方面解决了鱼眼变换图像适应方法存在的焦点检测和多焦点冲突问题。实现效果和用户主观评价结果表明,该方法是一种有效可行的图像适应方法。