Tuning the Properties of CZTS Films by Controlling the Process Parameters in Cost-Effective Non-vacuum Technique

Highly dispersive Cu₂ZnSnS₄ (CZTS) nanoparticles were successfully synthesized by a simple solvothermal route. A low cost, non-vacuum method was used to deposit CZTS nanoparticle ink on glass substrates by a doctor blade process followed by selenization in a tube furnace to form Cu₂ZnSn (S,Se)₄ (CZTSSe) layers. Different selenization conditions and particle concentrations were considered in order to improve the crystallinity and surface morphology; the annealing temperature was varied between 400°C and 550°C and the annealing time was varied between 5 min and 20 min in a selenium-nitrogen atmosphere. The influence of annealing conditions on structural, compositional, optical and electrical properties of CZTSSe thin films was studied. An improvement in the structural and surface morphology was observed with increasing of annealing temperature (up to 500°C). An enhancement in the crystallinity and surface morphology were observed for thin films annealed for 10–15 min. Absorption study revealed that the band gap energy of as-deposited CZTS thin film was approximately 1.43 eV, while for CZTSSe thin films it ranged from 1.15 eV to 1.34 eV at different annealing temperatures, and from 1.33 eV to 1.38 eV for different annealing times.     

Pyrazolonderivate. III. [2] Ein Beitrag zur Stereochemie von N,N-disubstituierten 4-Aminomethylen-3-methyl-1-phenyl-Δ2-pyrazolinonen-(5)

Pyrazolone Derivatives. III. A Contribution to Stereochemistry of N, N-Disubstituted 4-Aminomethylene-3-methyl-1-phenyl-Δ²-pyrazolinones-(5) The N,N-disubstituted 4-aminomethylene-Δ²-pyrazolinones-(5) 1 and 2 show a hindered internal rotation around the bond indicating a considerable polarisation of the system. This assumption is supported by i.r.-spectroscopic measurements which show that the CO-bond order decreases with increasing solvent polarity. Compounds 1 and 2 exist in the Z-configuration relative to the exocyclic CC-double bond. That can be attributed to a steric hindrance in the E-configuration of the aminomethylene-substituents with the methyl-group at the pyrazolone-ring.     

SARS-CoV-2 Infection Dysregulates Cilia and Basal Cell Homeostasis in the Respiratory Epithelium of Hamsters

Similar to many other respiratory viruses, SARS-CoV-2 targets the ciliated cells of the respiratory epithelium and compromises mucociliary clearance, thereby facilitating spread to the lungs and paving the way for secondary infections. A detailed understanding of mechanism involved in ciliary loss and subsequent regeneration is crucial to assess the possible long-term consequences of COVID-19. The aim of this study was to characterize the sequence of histological and ultrastructural changes observed in the ciliated epithelium during and after SARS-CoV-2 infection in the golden Syrian hamster model. We show that acute infection induces a severe, transient loss of cilia, which is, at least in part, caused by cilia internalization. Internalized cilia colocalize with membrane invaginations, facilitating virus entry into the cell. Infection also results in a progressive decline in cells expressing the regulator of ciliogenesis FOXJ1, which persists beyond virus clearance and the termination of inflammatory changes. Ciliary loss triggers the mobilization of p73⁺ and CK14⁺ basal cells, which ceases after regeneration of the cilia. Although ciliation is restored after two weeks despite the lack of FOXJ1, an increased frequency of cilia with ultrastructural alterations indicative of secondary ciliary dyskinesia is observed. In summary, the work provides new insights into SARS-CoV-2 pathogenesis and expands our understanding of virally induced damage to defense mechanisms in the conducting airways.     

Enabling Coarse X-ray Fluorescence Imaging Scans with Enlarged Synchrotron Beam by Means of Mosaic Crystal Defocusing Optics

Trace elements, functionalized nanoparticles and labeled entities can be localized with sub-mm spatial resolution by X-ray fluorescence imaging (XFI). Here, small animals are raster scanned with a pencil-like synchrotron beam of high energy and low divergence and the X-ray fluorescence is recorded with an energy-dispersive detector. The ability to first perform coarse scans to identify regions of interest, followed by a close-up with a sub-mm X-ray beam is desirable, because overall measurement time and X-ray dose absorbed by the (biological) specimen can thus be minimized. However, the size of X-ray beams at synchrotron beamlines is usually strongly dependent on the actual beamline setup and can only be adapted within specific pre-defined limits. Especially, large synchrotron beams are non-trivial to generate. Here, we present the concept of graphite-based, convex reflection optics for the one-dimensional enlargement of a 1 mm wide synchrotron beam by a factor of 5 to 10 within a 1 m distance. Four different optics are tested and characterized and their reflection properties compared to ray tracing simulations. The general shape and size of the measured reflection profiles agree with expectations. Enhancements with respect to homogeneity and efficiency can be expected with improved optics manufacturing. A mouse phantom is used for a proof-of-principle XFI experiment demonstrating the applicability of coarse and fine scans with the suggested optics design.     

The hawk/goose story: The classical ethological experiments of Lorenz and Tinbergen, revisited.

We present a historical account of the story behind the famous hawk/goose experiments of Lorenz and Tinbergen in a wider context of cognitive ethology. We discuss their significance, for ethological experimentation in general, and specifically for understanding innate constraints on cognition. As examples of the continuing significance of the hawk/goose paradigm of selective habituation, we discuss its relation to “exposure therapy” of human phobias and the use of hawk silhouettes as deterrents for songbirds. Finally we rephrase Uexküll's thesis of taxon-specific worlds (“Umwelten”) as a “Theory of World.” (PsycINFO Database Record (c) 2011 APA, all rights reserved)     

A fast Monte Carlo algorithm for studying bottle-brush polymers

Obtaining reliable estimates of the statistical properties of complex macromolecules by computer simulation is a task that requires high computational effort as well as the development of highly efficient simulation algorithms. We present here an algorithm combining local moves, the pivot algorithm, and an adjustable simulation lattice box for simulating dilute systems of bottle-brush polymers with a flexible backbone and flexible side chains under good solvent conditions. Applying this algorithm to the bond fluctuation model, very precise estimates of the mean square end-to-end distances and gyration radii of the backbone and side chains are obtained, and the conformational properties of such a complex macromolecule are studied. Varying the backbone length (from Nb=67 to Nb=1027), side chain length (from N=0 to N=24 or 48), the scaling predictions for the backbone behavior as well as the side chain behavior are checked. We are also able to give a direct comparison of the structure factor between experimental data and the simulation results.     

New Microalloyed Steels for Forgings

Microalloyed steels for forging applications have been newly developed in order to increase strength and toughness properties which thereby give the possibility for light weight constructions.The properties of these steels are set up by a controlled cooling directly from the forging heat without an additional heat treatment.This aim can be achieved on the one hand by a further development of precipitation hardening ferritic pearlitic steels (AFP-steel) due to an extended use of microalloying elements (AFP-M steel) and on the other hand by microalloyed steels which employ a bainitic microstructure (HDB steel).To adjust the targeted microstructure the temperature control has to be assured down to approx.500℃ for the AFP-M steels and down to approx.300℃ for the HDB steels.     

The effect of ultra-thin graphite on the morphology and physical properties of thermoplastic polyurethane elastomer composites

Composites of thermoplastic polyurethane (TPU) and ultra-thin graphite (UTG) with concentrations ranging from 0.5 wt.% to 3 wt.% were prepared using a solution compounding strategy. Substantial reinforcing effects with increased loadings are achieved. Compared to neat TPU, values for storage modulus and shear viscosity are enhanced by 300% and 150%, respectively, for UTG concentrations of 3 wt.%. Additionally, an enhancement of thermal properties is accomplished. The crystallization temperature and thermal stability increased by 30 °C and 10 °C, respectively, compared to neat TPU. Furthermore, the use of oxidized UTG (UTGO) with its added functional oxygen groups suggests the presence of chemical interactions between UTG and TPU, which additionally impact on the thermal properties of the corresponding composites. Controlling the oxidation degree, thus offers further possibilities to obtain composites with tailored properties. The presented approach is straightforward, leads to homogeneous TPU-UTG composites with improved materials properties and is especially suitable for commercial UTG materials and further up-scaled production.