On the generation of test patterns for multiple faults

This article presents a new method to generate test patterns for multiple stuck-at faults in combinational circuits. We assume the presence of all multiple faults of all multiplicities and we do not resort to their explicit enumeration: the target fault is a single component of possibly several multiple faults. New line and gate models are introduced to handle multiple fault effect propagation through the circuits. The method tries to generate test conditions that propagate the effect of the target fault to primary outputs. When these conditions are fulfilled, the input vector is a test for the target fault and it is guaranteed that all multiple faults of all multiplicities containing the target fault as component are also detected. The method uses similar techniques to those in FAN and SOCRATES algorithms to guide the search part of the algorithm, and includes several new heuristics to enhance the performance and fault detection capability. Experiments performed on the ISCAS'85 benchmark circuits show that test sets for multiple faults can be generated with high fault coverage and a reasonable increase in cost over test generation for single stuck-at faults.     

Tracking of moving interfaces in sedimentation processes using electrical impedance tomography

Sedimentation monitoring is widely used to control and optimize industrial processes. In this paper we propose a novel computational method for sedimentation monitoring using electrical impedance tomography (EIT). EIT measurements consist of electric current and voltage measurements that are made on the surface of the sedimentation tank and therefore they do not interfere with the sedimentation process. The proposed computational method is based on shape estimation and state estimation formulation of the EIT problem. The sedimentation is parameterized by the locations of the phase interfaces and conductivities of the phase layers. Three different evolution models for the state parameters are considered and the state estimates are computed using the extended Kalman filter algorithm. The performance of the method and the models are evaluated using simulated data from a six electrode EIT measurement configuration. From the results a promising performance of the method can be seen.     

High performance series-resonance energy-recovery circuit for plasma display panel

A new high performance series-resonance energy-recovery circuit (ERC) for a plasma display panel (PDP) is proposed. Two different ERCs are used for both sides of the PDP, and the slow falling and fast rising times are employed. Therefore, it features the zero voltage switching, low electromagnetic interference, low current stress, no severe voltage notch, and high energy-recovery capability.     

Sludge Production and Settleability in Biofilm-Activated Sludge Process

The sludge production and settleability have been estimated experimentally in a completely mixed biofilm-activated sludge reactor (hybrid reactor). A steady-state hybrid reactor was run at different stages of suspended biomass concentration (X) under constant values of influent substrate concentration (So) and hydraulic retention time (HRT). The values of X were gradually decreased in these stages until the system completely washed out of the suspended biomass and converted to pure biofilm reactor. As a result, the role of biofilm in the treatment gradually increased with an increase in the effluent substrate concentration (S). The experiment was supported by a mathematical expression for describing the sludge yield in the system under the previous conditions. The experimental and theoretical studies in the present work reveal that there is a critical phase of the hybrid system at which the system produces a high rate of excess sludge. That critical phase is found at a specific ratio between the suspended and the attached growth. Avoiding that critical phase enables the sludge production in the hybrid reactor to be reduced and optimized. Further, the minimum sludge production was found when the biofilm is theoretically inactive for chemical oxygen demand (COD) removal (S相似文献   

Dynamic anti-windup based control method for state constrained systems

Based on the dynamic anti-windup strategy, an alternative control methodology for state constrained systems is presented. The proposed method is an a posteriori approach for state constrained systems, which is differentiated from the usual a priori approach. That is, first a linear controller is designed to show a desirable nominal performance by ignoring state constraints. Then, an additional compensator is introduced to account for state constraints. By minimizing a reasonable performance index, a dynamic compensator is derived explicitly, which is expressed in plant and controller parameters. The proposed method not only provides a graceful performance degradation, but it also guarantees the total stability of the resulting systems. An illustrative example is given to show the effectiveness of the proposed method.     

Experiments on thermal stratification in inlet nozzle of steam generator

Nuclear power plant components suffer pipe shedding, cracking, thermal fatigue, bending and supporting bracket breakage during their life span. Notably, the horizontal inlet nozzle of steam generator is prone to thermal stratification frequently due to its operational characteristics. As a result, PWRs in many countries including the U.S.A. suffered a lot of pipe cracks and leakages around the late 1970s, as the thermal stress inflicted by thermal stratification formed in the horizontal inlet nozzle of steam generator during transition (auxiliary feedwater injection) was not reflected on power plant design. Therefore, we classified the nuclear power plants in Korea into KSNP and Westinghouse-type(W) power plants (Kori # 1,2,3,4, Yeonggwang # 1,2 and Uljin # 1,2) and conducted an experiment on thermal stratification and thermal cycling in relation to the volume of auxiliary feedwater injected into the horizontal inlet nozzle of steam generator and hot water flowing back from steam generator. As a result, it was found out that KSNP was hardly prone to thermal stratification while thermal stratification occurred in the horizontal inlet nozzle of steam generator in Westinghouse-tvpe(W) power plants, necessitating a solution to address such a phenomenon.••     

A systematic approach for model refinement considering blind and recognized uncertainties in engineered product development

In recent years, virtual testing has played an increasingly important role in the design and evaluation of engineered products. However, it is challenging to build the highly accurate computational models for virtual testing. Blind and recognized uncertainties are often unintentionally incorporated. These uncertainties consequently decrease the predictive capability of the models. To this end, this paper proposes a systematic approach for model refinement that minimizes the impact of unrecognized blind and recognized epistemic uncertainties in computational modeling. The approach consists of three steps: model invalidity analysis (MIA), development of an invalidity reasoning tree (IRT), and invalidity sensitivity analysis (ISA). First, in the MIA, possible causes that lead to discrepancies between the experimental and simulation responses are identified through brainstorming. Next, the IRT is built using the affinity diagram. It sequentially lists and screens potential candidate issues for model refinement at the stages of conceptual, mathematical, and computational modeling. Finally, the ISA quantifies the effect of incorporating updates in the model to address potential candidate issues with the goal of reducing the impact of the blind and recognized uncertainties. The most critical candidates are determined by using a weighted decision matrix. To demonstrate the effectiveness of the proposed approach, a case study examining a smartphone liquid crystal display fracture is presented.     

Electrospray‐deposited nickel ferrite thin film electrode for hydrogen production in PV‐assisted water electrolysis system

Nanocrystalline Ni ferrite thin film was prepared by electrospray deposition technique and characterized by different analytical techniques at different annealing temperatures. All these films were studied by photovoltaic‐assisted water electrolysis system for solar to hydrogen production efficiency measurement. Highly dense and uniform surface morphology was observed in as‐deposited film, which changed into agglomerated nanocrystalline grains of irregular size and shape with change in annealing temperature. The X‐ray photoelectron spectroscopy study showed that the as‐deposited film was a mixture of an oxyhydroxide form of iron and an Ni₂O₃ form of nickel, whereas it changed into ferrite phase with change in annealing temperature. The as‐deposited film was observed to be of amorphous phase, which changed to crystalline cubic spinel structure with change in annealing temperature. The solar to hydrogen production efficiency was found to increase in a film with an increase in annealing temperature. The film annealed at 500°C showed a high solar to hydrogen production efficiency (8.29%) with constant performance of up to initial 500 h. Thereafter, the performance slowly declined by 11% when up to 1000 h. Copyright © 2011 John Wiley & Sons, Ltd.