Characterization of CFRP Laminates’ layups using through-Transmitting ultrasound waves

Ultrasound waves interact strongly with the orientation and sequence of the plies in a layup when propagating in the thickness direction of composite laminates. Also the layup orientation greatly influences its properties in a composite laminate. If the layup orientation of a ply is misaligned, it could result in the part being rejected and discarded. Now, most researchers cut a small coupon from the waste edge and use a microscope to optically verify the ply sequences on important parts. This may add a substantial cost to the production since the test is both labor intensive and performed after the part is cured. A nondestructive technique would be very beneficial, which could be used to test the part after curing and requires less time than the optical test. Therefore we have developed, reduced, and implemented a novel ply-by-ply vector decomposition model for composite laminates fabricated from unidirectional plies. This model decomposes the transmission of a linearly polarized ultrasound wave into orthogonal components through each ply of a laminate. High probability is found, by comparisons between the model and tests, in characterizing cured layups of the laminates by using the proposed method.     

Measurement of the shape in the radioactive area by ultrasonic wave sensor

The HANARO (High-flux Advanced Neutron Application Reactor) has been operated since 1995. The Cold Neutron (CN) hole was implanted in the reflector tank from the design stage. Before a vacuum chamber and a moderator cell for the cold neutron source are installed into the CN hole, it is necessary to measure exactly the size of the inside diameter and thickness of the CN hole to prevent the interference problem. Due to inaccessibility and high radiation field in the CN hole, a mechanical measurement method is not permitted. The immersed ultrasonic technique is considered as the best way to measure the thickness and the diameter of the CN hole. The 4-Axis manipulator was designed and fabricated for locating the ultrasonic sensors. The transducer of an ultrasonic sensor having 10 MHz frequency leads to high resolution as much as 0.03mm. The inside diameter and thickness of 550 points of the CN hole were measured using 2 channel ultrasonic sensors. The results show that the thickness and inside diameter of the CN hole is in the range of 3.3 - 6.7mm and 0 156-165mm, respectively. This data will be a good reference for the design of the cold neutron source facility.     

A possible mechanism of destruction of coastal trees by tsunamis: A hydrodynamic study on effects of coastal steep hills

In this paper, experimental and numerical studies are presented to understand why some trees close to the shoreline survived the 25 October 2010 Mentawai tsunami, while trees further inland before a steep coastal hill were all destroyed. A set of experiments were performed in a wave flume to measure the flow depths and forces acting on tree models, and the experimental results were used to verify our numerical model. Cross-shore distribution of the flow depth and the flow-induced bending moment acting on tree trunks were studied using our numerical model. Our results show that the presence of the steep hill increased both the flow depth and the bending moment acting on trees close to the steep hill, and might be an important mechanism responsible for the destruction of coastal trees.     

A 60-GHz-Band Analog Optical System-on-Package Transmitter for Fiber-Radio Communications

We developed an analog optical system-on-package (SoP) transmitter for a 60-GHz-band radio-over-fiber (RoF) link. The SoP transmitter consisted of an electroabsorption modulator, radio frequency amplifiers, and a bandpass filter. The 60-GHz RoF wireless link was prepared to measure the performance of the SoP transmitter. The transmission characteristics of 64-quadrature amplitude modulation (64-QAM) data of the 60-GHz RoF wireless link, including the SoP transmitter, were investigated by measuring the error vector magnitude (EVM) and signal-to-noise ratio (SNR) with a baseband frequency. The EVM of the 60-GHz RoF wireless link was between 2.25% and 2.80%, and the SNR was between 27.36 and 29.31 dB from 140 and 770 MHz, at input baseband power of -9 dBm. The noise figure had the minimum of 8.44 dB at 500 MHz. We successfully transmitted digital community antenna television (CATV) system signals through the 60-GHz RoF wireless link, including the SoP transmitter. Digital CATV signals of 86 channels could be transmitted through the 60-GHz RoF wireless link, and the total throughput was found to be 2.61 Gb/s.     

Exploring Social Networks and Improving Hypertext Results for Cloud Solutions

Internet technologies are constantly evolving as well as the way people use them. Search engines help users to find higher and better relevant results to their searches. Cloud Computing is an evolution of the Internet services and provides a step further ecosystem that can be used to improve the search of more relevant results. Each search engine is based on different modules in order to retrieve the results expected by users using specific keywords. Social networks appear as a reliable Web technology that can directly support a content search. Several studies have been performed showing the growth of social networks in people lives. Using the cloud computing paradigm it is possible to propose a more scalable and efficient way to explore public information available on online social networks. This paper includes the analyses of several social networks services, available contents, cloud-crawlers, and information extraction. In order to collect relevant data from social networks, a social crawler on cloud is proposed. The new approach provides a cloud-based crawler for low-cost, effective, and personalized search models. Moreover, a new algorithm to rank Web documents is proposed and demonstrated. The proposed system is evaluated in comparison with the top Internet search engine, Google, its behavior is very promising, and it is ready for use.     

Selective Sharing of Load Current Components Among Parallel Power Electronic Interfaces in Three-phase Four-wire Stand-alone Microgrid

This paper investigates selective sharing of load current components among the parallel operation of distributed generators (DGs) in three-phase four-wire stand-alone microgrids. The proposed control method is based on master-slave operation of DGs, and the goal of selective sharing of load current components is to have DGs located in close proximity of the load operating in slave mode, in order to inject their available energy and also compensate the non-active load current components, while the distant DGs might operate in master mode to share the remaining load autonomously. Droop control is employed due to impracticality of communication at remote nodes, and resistive line impedance compensation is adopted to decouple active and reactive power controllers and ensure proper active power sharing among master DGs, irrespective of the mitigation of non-active current components by the slave inverters. The sharing factors for each current component are determined by a higher level control. The Conservative Power Theory (CPT) decompositions provide decoupled power and current references for the inverters, resulting in a selective sharing strategy. The principles supporting the developed control strategy are discussed, and the effectiveness of the control is demonstrated through computational simulations using PSIM software.     

Preparation of dandelion-type silica spheres and their application as catalyst supports

Dandelion-type silica spheres with a dendrimer-like porous structure were prepared by adding pore modifiers into aqueous synthetic mixtures of tetraethylorthosilicate (TEOS), hexadecyltrimethylammonium bromide (CTAB), ammonium hydroxide, and acetone. The formation of silica spheres and their porous characteristics were investigated using various techniques, including electron microscopy, nitrogen adsorption, and thermogravimetric analysis. Benzyl acetate (BENA) was very effective in the formation of a dendrimer-like porous structure. However, the composition of TEOS, CTAB, acetone, and BENA strongly influenced the size and shape of the silica spheres and their porous structure. The synthetic mixture of 1 TEOS: 0.22 CTAB: 1.9 BENA: 0.32 NH₄OH: 36 acetone: 236 H₂O produced dandelion-type silica spheres with diameters of ~300 nm. The phosphazenium hydroxide (PzOH) catalyst supported on the dandelion-type silica spheres prepared by adding BENA showed high catalytic performance in the transesterification of soybean oil with methanol due to its high feasibility for rapid access of large triglyceride molecules into the basic PzOH moieties incorporated in the pores.     

Motion planning algorithms for molecular simulations: A survey

Motion planning is a fundamental problem in robotics that has motivated research since more than three decades ago. A large variety of algorithms have been proposed to compute feasible motions of multi-body systems in constrained workspaces. In recent years, some of these algorithms have surpassed the frontiers of robotics, finding applications in other domains such as industrial manufacturing, computer animation and computational structural biology. This paper concerns the latter domain, providing a survey on motion planning algorithms applied to molecular modeling and simulation. Both the algorithmic and application sides are discussed, as well as the different issues to be taken into consideration when extending robot motion planning algorithms to deal with molecules. From an algorithmic perspective, the paper gives a general overview of the different extensions to sampling-based motion planners. From the point of view of applications, the survey deals with problems involving protein folding and conformational transitions, as well as protein–ligand interactions.     

Linear-Time Construction of Two-Dimensional Suffix Trees

The two-dimensional suffix tree of a matrix A is a compacted tree that represents all square submatrices of A. We present the first complete version of a deterministic linear-time algorithm to construct the two-dimensional suffix tree by applying a divide-and-conquer approach.