<乙酸乙酯>合成实验中产品产率计算的讨论

乙酸乙酯合成实验的方法、产品产率计算几种情况的分析讨论。     

服装与热舒适

本文参阅国内外研究成果，对服装环境、服装材料、服装穿着与人体热舒适关系的有关问题进行了分析，认为热舒适对作业者的身心健康、对提高其工作效率有着重要意义。     

Influence of Rare-earth Elements on Mechanical Properties of Palladium

The influence of 0.1-0.6 at.-%RE additions (RE= La, Ce, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Er, Yb) on themechanical properties of Pd was studied. All above RE additions increased not only the strengthproperties at ambient temperature but also the tensile strength, creep rupture time and activation en-ergy at high temperatures, simultaneously increased the elongation of Pd. In the range of dilute con-centration, the strength properties of Pd-RE alloy enhanced linearly with RE concentration. Whenthe strength properties of Pd-RE alloys were normalized at 0.1 at.-%RE, it was found that light REelements had stronger effect on the properties of Pd than heavy RE, whereas Eu, Yb, Ce had anoma-lous effect. In all Pd-RF alloys, Pd-Eu alloy had the highest strength properties, successively Pd-Yband Pd-Ce alloy. The effect mechanisms of RE in alloy, such as purifying impurities, increasingrecrystallization temperature, refining grain size. expanding crystal lattice, increasing dislocation den-sity and decreasing stacking fault energy, forming stable RE oxidation by internal oxidation, and soon, were observed. They were strengthening sensitive factors. The influence of the factors onstrength properties and elongation of Pd was discussed.     

气凝胶──一种结构可控的新型功能材料

气凝胶是一种结构可控的新型轻质纳米多孔性非晶固态材料，具有许多特殊性质，因而蕴藏着广阔的应用前景。本文综述了气凝胶材料的制备方法、结构控制原理、性质和各种可能的应用。     

The relations of impregnated cathode properties to the tungsten matrix structure

Some data of emission and evaporation properties related to tungsten matrix structures of the impregnated cathodes are analyzed. The results indicate that the particle size of tungsten powder and the pore size in the porous matrix determine the total inside surface area of all pores, the diffusion length of barium atoms over tungsten grain surfaces, and the diameter and length of the path through which barium atoms are transported. These factors all relate to the properties and operation mechanism of an impregnated cathode; therefore, it would not be strictly correct to use only the matrix porosity for characterizing the cathode properties. Finally, the preferred structures of porous tungsten matrix depending on different applications of impregnated, cathodes are proposed.     

FeSiB薄膜的巨磁阻抗和应力阻抗效应研究

软磁材料中存在巨磁阻抗 (giantmagneto impedance ,GMI)效应以及与之相同来源的应力阻抗 (stress impedance ,SI)效应 ,利用这两种效应可以制成具有高灵敏度的微型化的磁场和应力 应变传感器。本文基于传感器的实际应用 ,对图形化的、较大磁致伸缩的FeSiB单层和多层薄膜的巨磁阻抗和应力阻抗效应中频率和退火的影响进行了研究。结果表明 ,对于两种效应 ,经过退火处理的单层和多层膜均可在较低的频率下得到较高的灵敏度 ,而多层膜中的应力阻抗效应将为新型高灵敏传感器的设计和研制开辟一条崭新的途径     

High concentration erbium doping of silicon-rich SiO2 thin films on silicon

In this work, high concentration erbium doping in silicon-rich SiO₂ thin films is demonstrated. Si plus Er dual-implanted thermal SiO₂ thin films on Si substrates have been fabricated by using a new method, the metal vapor vacuum arc ion source implantation with relatively low ion energy, strong flux and very high dose. X-Ray photoelectron spectroscopy measurement shows that very high Er concentrations on the surfaces of the samples, corresponding to 10 at.% or the doping level of 10²¹ atoms cm⁻³, are achieved. This value is much higher than that obtained by using other fabrication methods such as the high-energy ion implantation and molecular beam epitaxy. Reflective high-energy electron diffraction, atomic force microscopy and cross-section high-resolution transmission electron microscopy observations show that the excess Si atoms in SiO₂ matrix accumulate to form Si clusters and then crystallize gradually into Si nanoparticles embedded in SiO₂ films during dual-ion implantation followed by rapid thermal annealing. Er segregation and precipitates are not formed. Photoluminescence at the wavelength of 1.54 μm exhibits very weak temperature dependence due to the introduction of Si nanocrystals into the SiO₂ matrix. The 1.54-μm light emission signals from annealed samples decrease by less than a factor of 2 when the measuring temperature increases from 77 K to room temperature.     

Diagnostic Data Compression Techniques for Embedded Memories with Built-In Self-Test

A system-on-chip (SOC) usually consists of many memory cores with different sizes and functionality, and they typically represent a significant portion of the SOC and therefore dominate its yield. Diagnostics for yield enhancement of the memory cores thus is a very important issue. In this paper we present two data compression techniques that can be used to speed up the transmission of diagnostic data from the embedded RAM built-in self-test (BIST) circuit that has diagnostic support to the external tester. The proposed syndrome-accumulation approach compresses the faulty-cell address and March syndrome to about 28% of the original size on average under the March-17N diagnostic test algorithm. The key component of the compressor is a novel syndrome-accumulation circuit, which can be realized by a content-addressable memory. Experimental results show that the area overhead is about 0.9% for a 1Mb SRAM with 164 faults. A tree-based compression technique for word-oriented memories is also presented. By using a simplified Huffman coding scheme and partitioning each 256-bit Hamming syndrome into fixed-size symbols, the average compression ratio (size of original data to that of compressed data) is about 10, assuming 16-bit symbols. Also, the additional hardware to implement the tree-based compressor is very small. The proposed compression techniques effectively reduce the memory diagnosis time as well as the tester storage requirement.