Influences of zinc oxide and an organic additive on the electrochemical behavior of pure aluminum in an alkaline solution

The corrosion behavior of pure aluminum in inhibited and uninhibited 4 MKOH was investigated by means of hydrogen collection, polarization curve measurement and electrochemical impedance spectroscopy (EIS). The results showed that the corrosion of pure aluminum was greatly inhibited by the addition of ZnO and dimethyl amine epoxy propane (designated as DE). EIS and EDAX analyses revealed that ZnO produces its effect by depositing on the aluminum surface, which increases the overpotential of hydrogen evolution. It was also found that the addition of DE could greatly improve the deposition of zinc layers.     

Structure and properties of polyimide‐bonded magnets processed from prepolymers based on diacetyl derivatives of aromatic diamines and dianhydrides

We report a novel method of polyimide (PI) synthesis from prepolymers based on dianhydrides and diacetyl derivatives of aromatic diamines that facilitate the preparation of a melt processable mixture at 300 ± 10°C of the prepolymer and magnetic Nd‐Fe‐B alloy to provide PI‐bonded magnets with enhanced properties. It is shown that chemical structure of the prepolymers strongly influences viscosity behavior via crystallization of the oligoimide in the melt, leading to formation of PI with rigid‐rod like structure. This structural ordering of the prepolymers based on diacetyl derivative of diamine used in this study, if not controlled, leads to exponential increase of melt viscosity with time, making it practically impossible to prepare melt processable mixture of the magnetic particles and the PI prepolymers at elevated temperatures. The results obtained demonstrate that appropriate dianhydrides and diacetyl derivatives of diamines that do not lead to crystallization of oligoimides in prepolymer mixture can be used under controlled processing conditions to prepare melt‐processable PI‐bonded magnets containing rigid‐rod like PI structure that significantly increases thermal stability of the magnets. The temperature dependencies of the magnetic properties of the PI‐bonded magnets under conditions that they are likely to encounter during their service life were found to be remarkably similar to that of commercial thermoplastic magnets such as injection‐molded nylon magnets. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 478–485, 2006     

Low-Temperature Dielectric Properties of Ceramic Potassium Tantalate (KTaO3)

Dielectric properties of KTaO₃ ceramic fabricated by both conventional sintering and sintering followed by isostatic hot pressing (HIP) were measured at T =4.2 to 300 K over a frequency range from 400 Hz to 4 MHz. The weak field response shows a faint peak near 10 K which has a clear relaxation character, as in high-purity single crystals. The general response is well reproduced by the Barrett function, but additional polarizability with relaxation character is also in evidence at higher temperatures. No dielectric hysteresis was observed at high fields for cycling frequencies down to 0.04 Hz anywhere in the temperature range.     

Tungsten Oxide Nanorods Array and Nanobundle Prepared by Using Chemical Vapor Deposition Technique

Tungsten oxide (WO₃) nanorods array prepared using chemical vapor deposition techniques was studied. The influence of oxygen gas concentration on the nanoscale tungsten oxide structure was observed; it was responsible for the stoichiometric and morphology variation from nanoscale particle to nanorods array. Experimental results also indicated that the deposition temperature was highly related to the morphology; the chemical structure, however, was stable. The evolution of the crystalline structure and surface morphology was analyzed by scanning electron microscopy, Raman spectra and X-ray diffraction approaches. The stoichiometric variation was indicated by energy dispersive X-ray spectroscopy and X-ray photoelectron spectroscopy.     

Derivation and analysis of a filtered backprojection algorithm for cone beam projection data

The authors address the problem of three-dimensional image reconstruction from cone beam projections. Modifying a result due to A.A. Kirillov (Soviet Math. Dokl., vol. 2, p.268-9, 1961), the authors derive an inversion formula for the case where the cone vertices form an unbounded curve. For the special case in which the cone vertices form a circle, an approximate reconstruction formula is developed and shown to be essentially equivalent to the practical cone-beam algorithm of L.A. Feldkamp et al. (1984). For this approximate inverse, the authors derive the resulting spatially varying point spread function, examine the effect of bandlimiting due to sampling, and compare the resulting image quality as a function of the radius of the circle formed by the cone vertices.     

Cation interdiffusion between thick film of YBa2Cu3O7-δ and ceramic substrate

Thick films of superconducting oxides, YBa₂Cu₃O_7-, were successfully made by conventional screen-printing technology on Al₂O₃, MgO, and ZrO₂ substrates. Interdiffusion between the superconductive film and substrate was investigated using analytical electron microscopy. The results indicate that MgO and ZrO₂ are superior to Al₂O₃ for substrate materials.     

The fate of 14C-radiolabelled diclofenac and 4'-hydroxydiclofenac in membrane bioreactor treatment of wastewater

This study aimed at enhancing knowledge on the fate of diclofenac (DF), together with its main human metabolite 4'-hydroxydiclofenac (4'OHDF), during wastewater treatment by using a laboratory-scale membrane bioreactor (MBR). The reactor was fed continuously with non-radiolabelled diclofenac for a one month period prior to a single pulse of a 14C-radiolabelled solution of DF and 4'OHDF. The solution spike contained approximately 25% 4'OHDF and 65% DF, which corresponds to the ratio observed in municipal sewage, as well as traces of two other metabolites. The radioactivity was monitored for a total of twelve days in the various output streams. The calculation of the complete mass balance in the system demonstrated that the major part of the radioactivity left the reactor with the permeate (88.7%), while 2.1% was recovered in the excess sludge. Negligible amounts were recovered in the off-gas traps and on the membranes. Chromatographic analyses of effluent samples, by means of HPLC-MS coupled in parallel to a radiodetector, displayed a different pattern than the one of the spiked solution. It showed the occurrence of three additional metabolites.     

Treatment of linear alkylbenzene sulfonate (LAS) wastewater by internal electrolysis--biological contact oxidation process

Surfactant wastewater is usually difficult to treat due to its toxicity and poor biodegradability. A separate physico-chemical or biochemical treatment method achieves a satisfactory effect with difficulty. In this study, treatment of the wastewater collected from a daily chemical plant by the combination processes of Fe/C internal electrolysis and biological contact oxidation was investigated. For the internal electrolysis process, the optimal conditions were: pH = 4-5, Fe/C = (10-15):1, air-water ratio = (10-20):1 and hydraulic retention time (HRT)= 2 h. For the biological contact oxidation process, the optimal conditions were: HRT = 12 h, DO = 4.0-5.0 mg/L. Treated by the above combined processes, the effluent could meet the I-grade criteria specified in Integrated Wastewater Discharge Standard of China (GB 8978-1996). The results provide valuable information for full-scale linear alkylbenzene sulfonate wastewater treatment.     

Seasonal factors influencing the failure of buried water reticulation pipes

While the use of environmental factors in the analysis and prediction of failures of buried reticulation pipes in cold environments has been the focus of extensive work, the same cannot be said for failures occurring on pipes in other (non-freezing) environments. A novel analysis of pipe failures in such an environment is the subject of this paper. An exploratory statistical analysis was undertaken, identifying a peak in failure rates during mid to late summer. This peak was found to correspond to a peak in the rate of circumferential failures, whilst the rate of longitudinal failures remained constant. Investigation into the effect of climate on failure rates revealed that the peak in failure rates occurs due to differential soil movement as the result of shrinkage in expansive soils.