Dynamic study of calcium phosphate formation on porous HA/TCP ceramics

Bone-like apatite formation on porous calcium phosphate ceramics was investigated in static simulated body fluid (SBF) and dynamic SBF at different flowing rates. The results of a 14-day immersion in static SBF showed that the formation of bone-like apatite occurred both on the surface and in the pores of the samples. When SBF flow at the physiological flow rate in muscle (2 ml/100 ml min1), bone-like apatite could be detected only in internal surface of the pores of samples. The result that bone-like apatite formation could only be found in the pores when SBF flown at physiological flow rate was consistent with that of porous calcium phosphate ceramics implanted in vivo: osteoinduction was only detected inside the pores of the porous calcium phosphate ceramics. This result implicates that the bone-like apatite may play an important role in the osteoinduction of Ca-P materials. The dynamic model used in this study may be better than usually used static immersion model in imitating the physiological condition of bone-like apatite formation. Dynamic SBF method is very useful to understand bone-like apatite formation in vivo and the mechanism of ectopic bone formation in calcium phosphate ceramics.     

Development of a multiplexed microfluidic proteomic reactor and its application for studying protein-protein interactions

Mass spectrometry-based proteomics techniques have been very successful for the identification and study of protein-protein interactions. Typically, immunopurification of protein complexes is conducted, followed by protein separation by gel electrophoresis and in-gel protein digestion, and finally, mass spectrometry is performed to identify the interacting partners. However, the manual processing of the samples is time-consuming and error-prone. Here, we developed a polymer-based microfluidic proteomic reactor aimed at the parallel analysis of minute amounts of protein samples obtained from immunoprecipitation. The design of the proteomic reactor allows for the simultaneous processing of multiple samples on the same devices. Each proteomic reactor on the device consists of SCX beads packed and restricted into a 1 cm microchannel by two integrated pillar frits. The device is fabricated using a combination of low-cost hard cyclic olefin copolymer thermoplastic and elastomeric thermoplastic materials (styrene/(ethylene/butylenes)/styrene) using rapid hot-embossing replication techniques with a polymer-based stamp. Three immunopurified protein samples are simultaneously captured, reduced, alkylated, and digested on the device within 2-3 h instead of the days required for the conventional protein-protein interaction studies. The limit of detection of the microfluidic proteomic reactor was shown to be lower than 2 ng of protein. Furthermore, the application of the microfluidic proteomic reactor was demonstrated for the simultaneous processing of the interactome of the histone variant Htz1 in wild-type yeast and in a swr1Δ yeast strain compared to an untagged control using a novel three-channel microfluidic proteomic reactor.     

Facile construction of nanofibers as a functional template for surface boron coordination reaction

A facile strategy to perform the boron coordination reaction on a template of nanofibers is developed. Peptides with phenylboronic acid tails (peptidyl boronic acids) are designed and prepared as building blocks that can self-assemble into nanofibers. After the addition of vicinal diol structural motifs to the self-assembling system, matrix-assisted laser desorption-ionization time-of-flight mass spectrometry indicates that the boron coordination reaction occurs on the template of nanofibers, which results in the increase of the width and roughness of the nanofibers as demonstrated by transmission electron microscopy and atomic force microscopy measurements. Because the surface-bound vicinal diol structural motifs have an ability to form hydrogen bonds with the peptide segments on the nanofibers, which restrain and disturb the hydrogen-bonding interaction among the nanofibers, the network structure formed based on the entanglement of nanofibers via hydrogen-bonding interaction is destroyed, which leads to a gel-sol transition. The novel concept of post-self-assembly modification demonstrated here could lead to a new technique for using self-assembled nanostructures in the emerging fields of nanoscience and nanotechnology.     

Oxygen vectors used for S-adenosylmethionine production in recombinant Pichia pastoris with sorbitol as supplemental carbon source

In order to increase the yield of S-adenosylmethionine (SAM) in recombinant Pichia pastoris, a strategy of adding oxygen vectors and supplemental carbon sources was described. Three organic solutions were used as oxygen vectors for SAM accumulation at different concentrations and addition times. Firstly, n-hexane (0.5%) or n-heptane (1.0%) was added after 72 h of cultivation to improve SAM production. Carbon metabolism was scarce during the induction phase because of low methanol concentration. Secondly, sorbitol (1.2%), selected from three candidates (glycerol, lactic acid, and sorbitol), was used as the supplemental carbon source. The yield of SAM was improved significantly (53.26%) at 1.0%n-heptane added at 72 h (48 h induction), 1.2% sorbitol added at 72, 96, and 120 h of cultivation and 1.0% methanol added every 24 h during cultivation.     

用于新颖高速网的1550nm光纤

本文介绍用于提高长途通信网的传输容量和传输距离的１５５０ｎｍ色散位移光纤的制作方法及其性能。