A NEW HEAT-TREATMENT PROCESS FOR 2014 ALUMINUM ALLOY AND ITS MECHANISM

The plan of heat-treatment process for 2014Al alloy is designed using orthogonal method, the heat-treatment experiments are made and the mechanical properties are tested according to the designed plan. The effect of solid solution temperature, ageing temperature, ageing time on microscopic mechanism of the mechanical properties of the 2014Al alloy is studied using microscope, transmission electron microscope. The best heat treatment process of the 2014Al alloy is developed. The experimental results indicate that the strength σ_b, yield stress σ_(0.2), percentage elongation δ of the alloy reach separately 490～500 MPa, 450～490 MPa, 10～12％ adopting the new heat treatment process. Compared with GB, the strength increases 20～30％, the percentage elongation increases 30～40％. The mechanism of the new heat-treatment process is also discussed.     

16Mn钢疲劳短裂纹扩展

用带有盲孔的16Mn钢小圆棒试样进行等幅加载的疲劳试验,研究盲孔边短裂纹的扩展。建立了短裂纹平均扩展速率、裂纹长和名义应力幅的表达式,分析考察了短裂纹扩展的统计规律,讨论了裂纹表面尺寸分布随疲劳循环数的演化情况。     

CF系列晶闸管触发器在机床电气中的应用

介绍一种新研发的CF系列晶闸管触发器及其在机床电气中的应用实例。     

并捻器成型工艺及模具设计

在仔细分析并捻器零件工艺特点的基础上 ,设计制造了并捻器压铸模 ,针对压铸过程中遇到的问题对模具进行了改进 ,并对铝合金原材料和铝合金的熔炼过程进行了重点控制 ,取得了良好的效果。     

新型倾斜板技术制备半固态铝合金坯料和浆料

采用自行设计的波浪型倾斜板,在斜板冷却条件下制备了组织和触变性能优良的半固态合金坯料。而在斜板加热条件下制备出了组织优良的半固态合金浆料。在采用波浪型的倾斜板制备半固态合金过程中,在熔体爆发形核与枝晶破碎的共同作用下,形成了细小球形的半固态合金组织,浇注温度、冷却强度、斜板倾角和斜板表面材质是影响半固态合金组织的主要因素。得出了本试验条件下制备AlMg3合金半固态坯料的浇注温度范围为660~690℃;制备AlSi6Mg2合金半固态坯料的浇注温度范围为660~680℃;制备AlSi6Mg2半固态合金浆料的合理工艺条件为:斜板预热温度为300℃时,合金浇注温度为680℃。     

多侧孔零件冲孔模设计

介绍了一副典型的多侧孔冲孔模的设计分析和模具结构。由于多侧孔冲压件，大多数是侧孔布置在冲压件的周围，因而冲孔凹模只能放在冲压件的内部，往往受到冲压件体积的限制，这样冲孔凹模的强度和刚度都受到极大影响，该文介绍了两种方法解决这一问题，可供同行在类似产品设计中参考。     

镍磷合金镀层防变色性能初探

采用正交试验和条件试验，筛选出了一种以植酸、苯甲酸钠、钼酸钠和EDTA为基本组成的镍磷合金抗蚀防变色剂。通过孔隙率测定、18％～20％盐酸点滴实验、10％氯化钠浸泡实验和阳极极化曲线测试等实验，对镍磷合金层的抗腐蚀性能进行了研究。     

Strengthening technology and mechanism for semi-solid die casting of aluminum alloy

Combined with theoretical evaluation,an optimized strengthening process for the semi-solid die castings of A356 aluminum alloy was obtained by studying the mechanical properties of castings solution treated and aged under different conditions in detail,then,the semi-solid die castings and liquid die castings were heat treated with the optimized process.The results show that the mechanical properties of semi-solid die castings of aluminum alloy are superior to those of the liquid die castings,especially the strengthening degree of heat treated semi-solid die castingsis much greater than that of liquid die castings with the tensile strength more than 330 MPa and the elongation more than 10％,and this is mainly contributed to the non-dendritic and more compact microstructure of semi-solid die castings.The strengthening mechanism of heat treatment for the semi-solid die castings of A356 aluminum alloy is due to the dispersive precipitation of the second phase(Mg2 Si) and formation of GP Zone.     

快速凝固Mg94.6Zn4.8Y0.6合金薄带微观结构及显微偏析

采用单辊快速凝固技术制备了Mg94．6 Zn4．8 Y0.6合金快速凝固薄带，并通过扫描电镜的背散射及线扫描研究了快速凝固Mg94．6 Zn4．8 Y0.6合金薄带的显微偏析。结菜表明，由于溶质截流，单辊快速凝固Mg94．6 Zn4．8 Y0.6合金薄带为过饱和单相α—Mg固溶体的蜂窝状组织，Mg、Zn和Y宏观分布比较均匀。但在薄带厚度方向上存在偏析，在晶内也存在显微偏析，偏析形成是由于从辊面到自由面凝固速度的差异及溶质传输和晶格结构造成的，其中Zn元素偏析最大，Y元素次之，Mg元素最小。     

锌铝基合金陶瓷层激光重熔区的表面温度场

使用HSC 31快速扫描红外热像仪 ,测量了含Al2 O3 表层的锌铝合金激光熔覆时的表面温度场 ,测得熔池中最高温度为 16 72℃ ,边缘温度为 6 0 0～ 70 0℃ ,冷却速率为 2× 10 3 ～ 3× 10 4 ℃ /s以及熔池形状和等温曲线。