高耐蚀性热镀锌板的钝化处理工艺探讨

介绍了热镀锌板钝化膜的形成机理 ;针对攀钢热镀锌板出现白锈、黑斑等问题 ,分析了钝化液pH值、添加剂及操作条件对钝化膜质量的影响 ,同时提出了改进热镀锌板耐蚀性能的措施     

Microstructure Evolution of Intermetallics Produced by Laser Powder Deposition

NiAl intermetallic alloys are potential high temperaturestructural materials in aeronautical and astronauticalindustries[1].However,the poor ductility andtoughness at room temperature severely restrict theirengineering applications[2,3].It is important todevelop new technology to product intermetallicmaterials for the improvement of the comprehensiveproperties and the workability.Laser powder depositionhas been used to synthesize many new materials.Furthermore,if incorporated with rapid proto…     

EFFECT OF γ-IRRADIATION ON CuZnAl SHAPE MEMORY ALLOY

用透射电子显微镜和正电子湮没等分析手段,研究了CuZnAl形状记忆合金的γ辐照效应,此合金经一定剂量的γ辐照后,马氏体转变温度明显提高,而形状记忆功能仍保持不变。     

马氏体相变研究的进展和瞻望SCIEI

叙述马氏体相变研究的一些进展和瞻望,包括马氏体相变的定义,马氏体相变热力学,奥氏体状态对马氏体相变的影响,动力学,形核和长大,以及马氏体相变晶体学。     

Anti-oxidation mechanism of SiC-B4C-C composites

Mixture of green petroleum coke, B4 C and SiC together with short carbon fiber were employed as starting materials, the mixture was press formed without any binder after grinding, dense and homogeneous binderless SiC-B4 C-C（carbon/ceramic） composites were then obtained after sintering. Composites thus prepared possess excellent anti-oxidation property, that is, mass loss less than IG within the temperature range from 900 to 1 100 ℃ for 10 h. Anti-oxidation mechanism was also discussed from the viewpoint of thermodynamics, excellent anti-oxidation property of materials thus prepared can be discribed to 1） solid SiO2 formed from SiC, which restrains the filtering of oxygen and simultaneously, its volume expansion brought about by the reaction takes roles both walling up the original pores and making the material more compact; 2） liquid B2O3 from the reaction of B4C not only makes the combination with C, B4 C and SiC tighter through forming solid solution, but also effect of reaction SiC（s）＋2CO（g） =SiO2 （s）＋3C（s） is an expansive process, which improves the microstructure of the material.     

基于正交试验的注塑成型工艺参数CAE模拟设定

运用基于CAE技术的注塑工艺参数优化配置和注塑工艺方案设计的思想,结合正交试验设计方法对工艺参数进行CAE仿真试验,并以零件翘曲变形为优化目标,通过敏感因子分析,获得最佳工艺参数组合.经注塑机试模和三坐标测量机的检测分析,验证了CAE模拟结果的准确性和最佳工艺参数组合在实际生产中的效果.     

ZTC4筒形件温成形扩口数值模拟

对铸造Ti-6Al-4V筒形件温成形扩口成形工艺进行了数值模拟分析,得出了优化的工艺参数,并对凸模锥角进行了优化模拟,得出了合适的锥角。     

Metallographic sample prepared by ion beam etching

Ion beam etching technique was used to reveal the metallograhpic microstructure and interface morphology of electroplating chromium coating, in particular, whose substrate surface layer was treated in advance by laser quenching. Chemical etchings were also conducted for comparison. The reveal microstructures were observed and analyzed by scanning electron microscopy. The results show that ion beam etching can reveal well the whole microstructures of composite coating-substrate materials.     

Wear-resistance and anti-scuffing of multi-arc ion plating molybdenum films

The multi-arc ion plating technology was employed to prepare the molybdenum films with thickness of 3 μm on the AISI 1045 steel. The wear and scuffing tests were carried out on the ball-on-disc tester. AFM and SEM equipped with EDS were adopted to observe and analyze the morphologies and element compositions of surface,cross-section and worn scar of the Mo film. The phase structure was studied by XRD and the bonding strength between Mo film and substrate was measured by scratching tester. The tribological experiments show that the Mo film possesses a good wear-resistance and an excellent anti-scuffing property. The failure mechanism of Mo film under extreme condition is flaking off.     

基于VC++6.0的3-DOF机器人鼠标移动轨迹示教控制系统

采用VC 6.0开发软件,设计了一个3-DOF机器人鼠标移动轨迹示教控制系统,在该控制系统中采用鼠标移动轨迹示教来替代传统按钮式示教盒示教,有效地克服了传统示教次数多、运动不稳定的缺点.适用于对精度要求不高的机器人进行有特定要求的点位控制.