糠醛临氢脱羰催化剂的研制开发

提出了一种可应用于糠醛临氢脱羰的新型催化剂—Pt催化剂。通过实验确定了其最佳载体和助剂及反应条件 ,开发出一种以Pt为主的脱羰催化剂 ,并进行了 5 0 0h的寿命实验 ,其呋喃产率高于 80 %,优于已知Pd催化剂 ,现已投入工业应用。     

一种基于子空间分解的IIR信道盲辩识算法

本文证明了对IIR信道输出进行过采样 (采样率是输入码率的整数倍 )可以转化成单输入多输出的多信道模型 ,并且不同的信道有相同的AR系数 .基于这一特性本文提出一种基于子空间分解的信道参数盲辩识方法 ,即不同信道的MA系数可以由输出信号的噪声子空间唯一确定 ,而AR系数则可以通过求解YW方程得到     

ISDN的现状和发展

９０年代将是ＩＳＤＮ和宽带ＩＳＤＮ迅速发展的年代，本文介绍了国外Ｎ－ＩＳＤＮ和Ｂ－ＩＳＤＮ的发展动向，并结合我国通信网的现状，对发展ＩＳＤＮ（Ｂ－ＩＳＤＮ）提出若干建议。     

Voigt线型的微分消卷积

通过频域内的近似处理得到了洛仑兹线型微分消卷积的实用算符。推广到高斯、洛仑兹线型的复合情形即Ｖｏｉｇｔ线型，亦可得到它的消卷积算符。把所得算符应用于单峰、多峰情形，对各种不同的组合形式，分别得到了消卷积谱，其分辨率提高因子Ｋ与复合线型中洛仑兹成分的多少有关。     

球铁管表面喷锌机的设计与研究

球铁管是我国“九五”和“十五”期间大力推广和发展的项目 ,在大量的设计和应用基础上 ,对球铁管生产使用的重要设备之一———表面喷锌机进行了系统的研究与分析 ,提出了相关的设计思想和方法。对于提高表面喷锌机的使用性能和生产效率具有重要意义     

Machining with tool–chip contact on the tool secondary rake face—Part II: analysis and discussion

The forces, chip thickness, and natural tool–chip contact length in machining with a double-rake-angled tool are predicted in Part II of the present study. It is revealed that in comparison with a single-rake-angled tool, a double-rake-angled tool increases the forces, especially the thrust force. However, the increase in chip thickness and tool–chip contact length is not significant under the input conditions specified in the present study. The effect of seven input variables of the proposed model is quantitatively investigated. The predicted variations of forces, chip thickness, and natural tool–chip contact length are in good agreement with theoretical and experimental results obtained by other researchers. The interrelationships among the resultant force, the chip thickness, and the natural tool–chip contact length are established, which provides a new and promising method to estimate the tool–chip contact length by employing the resultant force. It is demonstrated that the model can also be extended to study the problem of machining with a groove-type chip breaker tool.     

多级泵站老化的模糊评价模式

多级泵站是一个包括各级泵站及泵站内各种设施的复杂系统，系统内各个泵站的老化直接影响整个泵站系统的正常运行，采用单元化方法将多级泵站系统单元伦，引和泵站老化评价指标，建立了多级泵站老化的模糊评价模式，并对甘肃省景泰高扬程提水灌区多级泵站系统进行分析，提出了评价多级泵站老化程度的排序方法。     

低相噪,低杂波数字锁相环路滤波器的设计

较详细地分析数字锁相频率合成器的相位噪声，着重用控制论方法对低相噪、低杂波锁相环的环路滤波器进行设计，并用某Ｓ波段频率合成器的实验结果进行了验证。     

Formation mechanism of bainitic ferrite and carbide

Superledges on the broad faces of bainitic ferrite plates have been observed with transmission electron microscope (TEM). The observed superledges, ranging from less than 1 to 24 nm in height, are imaged in three dimension by way of tilt operation under TEM. Also, an array of smaller superledges are observed to pile up in front of a secondary phase. Pileup of superledges in front of a barrier is indicative of the mobility of an individual superledge. The precipitation of carbide associated with bainitic ferrite is also studied. It is observed that a carbide of a wedgelike shape may exist in front of a superledge with its tip(i.e., thinner end) penetrating the austenite and its root (the other end) originating at α:γ boundary. This condition indicates that the observed carbides may nucleate at the austenite side of α:γ phase boundary and grow toward austenite matrix. This article is based on a presentation made at the Pacific Rim Conference on the “Roles of Shear and Diffusion in the Formation of Plate-Shaped Transformation Products,” held December 18-22, 1992, in Kona, Hawaii, under the auspices of ASM INTERNATIONAL’S Phase Transformations Committee.