钛酸钾品须填充UHMWPE复合材料的摩擦磨损性能研究

用钛酸钾晶须(PTW)对超高摩尔质量聚乙烯(UHMWPE)进行填充改性,考察了复合材料的摩擦磨损性能,研究了其结晶情况,观察了磨损表面形貌并分析了其机理.结果表明随着PTW用量的增加,复合材料的硬度、结晶度以及维卡软化点都有所增大.PTW提高了复合材料的耐磨性,但摩擦系数有所上升.PTW的加入使得UHMWPE的磨损机理从黏着磨损和塑性变形改变成疲劳磨损和轻微的塑性变形,提高了其抗磨粒磨损的性能.     

基于自由运动一维标定物的多摄像机参数标定方法与实验

一维标定方法易于实现且标定效率高,为了克服现有一维标定方法的一些不足,本文提出一种用一维标定物标定多摄像机内外参数的方法,首先进行两两标定,在此过程中,假定主点坐标近似已知而仅考虑畸变、焦距、旋转和平移等参数,接着利用基本矩阵及一维标定物上特征点之间的几何约束,估计两摄像机的内外参数,两两标定完成后,采用Dijkstra最短路径法和捆绑调整对多摄像机系统进行全局标定(含主点坐标),仿真和真实实验表明本文的方法是切实有效的.     

亚砜基改性纤维素膜的SO2气体渗透性能研究

分别使用二甲基亚砜浸泡的物理方法及苯基乙烯基亚砜加成的化学方法对纤维素膜进行了改性,并对改性膜的性能进行了测试.结果表明改性后纤维素膜仍为致密结构,SO2的渗透性能及其对N2的分离性能明显提高,其中改性液中添加二甲基亚砜的均相化学加成反应所得的改性膜具有较好的SO2渗透稳定性.     

氧化作用控制“四硫富瓦烯-葸”二元体系的荧光开关行为

利用Wittig反应将高荧光量子产率的蒽基团通过双键连接在四硫富瓦烯单元上，合成了二元共轭体系化合物TTFan．在氧化作用的控制下，四硫富瓦烯单元的给电子能力降低，TTFan的荧光发射强度增大至原来的十几倍，实现了荧光的“off-on”过程．     

新型螺杆挤出机固体输送理论的研究

介绍了一种嵌套式新型螺杆挤出机。在固体输送段对内螺杆的两种等效情况下固体塞的运动和受力作了深入分析。理论上证明了这两种情况下的固体输送机理与外螺杆的情况相同,均建立在固体摩擦输送机理基础之上;讨论了牵引角、摩擦因数和螺纹升角对上述三种情况固体输送流率的影响。结果表明,螺杆旋转机筒静止和螺杆静止机筒旋转两种情况下固体输送流率相差不大,而螺杆机筒同时旋转情况下的固体输送流率远大于其他两种情况。增大牵引角、降低螺杆表面粗糙度和提高机筒内表面的摩擦因数均有助于提高固体输送流率。螺杆旋转机筒静止和螺杆静止机筒旋转这两种情况下最佳螺旋角均为17°左右,而螺杆机筒同时旋转情况下最佳螺旋角为15°左右。     

Molecular weight distribution of polyethylene catalyzed by Ziegler–Natta catalyst supported on MgCl2 doped with AlCl3

Ti‐based Ziegler–Natta catalysts supported on MgCl₂ doped with AlCl₃ were prepared by the reaction of MgCl₂/AlCl₃–ethanol adduct with TiCl₄. No AlCl₃ crystallites were found in the AlCl₃‐doped catalysts by WAXD analysis, suggesting that AlCl₃/MgCl₂ solid solution was formed. The effect of doping on the catalyst performance in ethylene polymerization was investigated. The results showed that the catalysts based on AlCl₃‐doped MgCl₂ support exhibited a slightly higher activity than did the MgCl₂‐supported catalyst and the molecular weight distribution (MWD) of polyethylene (PE) markedly increased (from 10.8 to 47.9) with the increase of AlCl₃ content in catalysts. The changes in catalyst's active center distribution were studied based on nonlinear fitting of the polymer GPC curves by multiple Flory functions. It was found that increase of types of active centers by introducing AlCl₃ into the support should be responsible for the broadening of MWD of PE. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 1768–1772, 2006     

高效液相色谱法分析混合甲基萘

建立了甲基萘的高效液相色谱分析方法，确定了紫外检测器波长、流动相及其组成等实验条件。结果表明：用高效液相色谱法分析混合甲基萘，α-甲基萘和β-甲基萘可以得到有效分离。     

Modification of polysulfide sealant with polysulfide polythio‐urethane‐urea

With a small amount of isocyanate‐terminated polysulfide (NCO‐PSF‐NCO) as additive, the commercial polysulfide‐based sealant had significant improvement in mechanical properties. The test results showed that 5% of NCO‐PSF‐NCO could help to rise 50% in the tensile strength and 27% in the ultimate elongation of the polysulfide sealant. The adhesive strength to substrates such as steel, epoxy‐coated or polyurethane‐coated surface also increased significantly. Dynamic mechanical thermal analysis and differential scanning calorimetry analysis revealed that formed polysulfide polythio‐urethane‐urea (polysulfide‐urea) contributed to a slight increase in the T_g of the polysulfide sealant. It might be due to the domains of polysulfide‐urea, which had effects of physical crosslinking and chain‐extending on the polysulfide sealant. However, the introduction of polysulfide‐urea structures had no appreciable influence on oil resistance of the polysulfide sealant. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007     

过氧化氢在生成戊二酰-7-氨基头孢烷酸过程中的影响

头孢菌素C(CPC)在D-氨基酸氧化酶为催化剂的情况下,与O2反应生成α-ketoadipyl-7-ACA,再与过氧化氢反应生成戊二酰基-7-氨基头孢烷酸(Gl-7-ACA).在此反应中生成的α-ketoadipyl-7-ACA是造成目标产物收率低的关键因素之一.通过加入适量的双氧水可以使剩余的α-ketoadipl-7-ACA转化为Gl-7-ACA,从而使裂解的收率提高5%.     

基于NB35047-2015规范的锦屏拱坝抗震复核

能源行业标准《水电工程水工建筑物抗震设计规范》(NB35047-2015)已于2015年9月1日颁布实施。介绍了依据该规范开展的锦屏一级高拱坝抗震安全复核工作。主要内容包括:基于设定地震的场地相关设计反应谱研究;采用动力拱梁分载法、线弹性有限元法和非线性有限元法,进行设计和最大可信地震作用下的应力和坝肩岩体动力稳定分析;在选定的人工地震波基础上,采用以基岩峰值加速度在设计地震基础上比例放大的方式,进行大坝地基系统在超设计地震荷载下的地震超载能力分析。复核分析表明,锦屏一级高拱坝具有较高的抗震潜力;设计地震和最大可信地震作用下,坝体抗压强度安全满足现行抗震规范要求,且抗压强度安全有较大安全裕度,坝体拉应力基本未超过混凝土容许的应力范围,仅局部应力集中部位拉应力较大,能满足校核地震作用下"不溃坝"的设防要求。