Cooling strategies for cryogenic machining from a materials viewpoint

This article discusses the cooling strategies for cryogenic machining from a materials viewpoint. It is argued that, because different materials respond to temperature and machining processes differently, different cooling strategies are needed to improve the machinabilities of materials by cryogenic machining. In this work, five workpiece materials such as AISI1010 low-carbon steel, AISI1070 high-carbon steel, AISIE52100 bearing steel, titanium alloy Ti-6Al-4V, and cast aluminum alloy A390 were studied experimentally at various temperatures. Based on the experimental results of the cryogenic properties of the materials and their known machining characteristics, the cooling strategies for cryogenic machining of these materials were analyzed.     

6×××系汽车车身板铝合金的合金化及组织性能的研究

采用力学性能试验和光学金相分析法,研究了Mg和Mn等元素对6×××系汽车板铝合金组织及性能的影响。结果表明:Mg和Mn是提高6×××系汽车板铝合金时效初期硬化值的元素,但对时效初期硬化速度影响不大。提高Mg和Mn含量,合金经170℃30min时效后的强度增大,伸长率降低。合金固溶处理淬火后的晶粒尺寸和形态不随Mg含量而改变,但随Mn含量增加而显著细化。     

中英规范有关建筑物防雷接地做法的比较

结合国家标准GB 50057-2010《建筑物防雷设计规范》和BS规范BS EN 62305-2006《Protection against lightning》,介绍了两本规范中建筑物防雷装置做法,简述了两种规范中有关建筑物外部防雷(接闪器、引下线、接地装置)、内部防雷以及防雷击电磁脉冲的有关规范条文规定和比较。     

Camouflage texture evaluation using a saliency map

Multimedia Systems - Camouflage effect evaluation and examination is an important procedure in digital camouflage pattern design as it is helpful in improving the objectivity and effectiveness...     

An interactive lung field segmentation scheme with automated capability

Feasible clinical application of any automated segmenting methodology demands more than just accuracy. Amendment to the automated delineation is necessary when the algorithm fails, however, integrated solution to such a scenario is largely absent in literature. Hence in this survey we devised an architecture that does both the automated and interactive lung field localizations using a single segmenting engine—random walker algorithm—so that intuitive amendment is only necessary when the automated generated delineation is unsatisfactory. The algorithm proceeds by first extracting 18 intensity profiles running horizontally, each of them equally spacing apart, and in each intensity profile three extreme points denoting the two lungs and the esophagus are determined through profile matching. This done, the algorithm removes profiles that do not intersect with the lung, and the rest of the extreme points are plugged into random walker algorithm to perform segmentation. The achieved accuracy in localization by the above was 0.8875 in terms of overlap measure (the maximum value for this parameter is 1) over 341 images. In the case where unsatisfactory delineation prompts amendment necessary, the user can interactively segment the lung by just a shift on some of the previous-determined points to the desired locations, and random walker algorithm is run again with the amended input. By such a fusion, the benefits of both the automated and interactive segmentation are shared in a single architecture.     

光学薄膜元器件外观特性机器视觉检测系统

本系统利用工业级摄像头及开发包的机器视觉功能与计算软件编程控制技术相结合,通过与输入控制系统中的标准膜片模板外观品质进行对比,实现高速高效、准确识别检测光学薄膜器件中滤光片的外观缺陷。可在生产线上根据外观品质标准模板中设定的类别进行自动分类装盒。     

"计算机网络技术与应用"课程教学改革与实践的探讨

“计算机网络技术与应用”是一门实践性很强的专业课程,不经过必要的实验教学是不可能达到教学目的,所以在教学过程中必须重视实验教学,注重学生实践技能的培养。而恰当选择实验内容,理论与实践相结合是做好实验教学的关键。