Green and self-lubricating polyoxymethylene composites filled with low-density polyethylene and rice husk flour

Polyoxymethylene (POM) composites filled with low-density polyethylene (LDPE) and rice husk flour (RHF) were prepared by injection molding. The POM/5 wt % LDPE/7.5 wt % RHF composite exhibited the lowest wear rate, whereas the coefficient of friction remained low, and the POM/5 wt % LDPE/5 wt % RHF composite had the best mechanical properties. X-ray diffraction analysis was carried out, and the worn surfaces were examined with scanning electron microscopy. The results showed that the addition of the filler reduced the crystallinity degree of the POM composites. The main wear mechanism for unfilled POM was adhesion, whereas for the POM composites, wear seemed to occur mainly by fatigue and abrasion. It was experimentally confirmed that the POM composite filled with LDPE and RHF, which is well-performing, low-cost, and environmentally friendly, could be a potential material for tribological applications. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

发展3G时不我待--兼析民族3G标准的发展

当今通信业最热门的话题非3G莫属。尽管2000年3G许可证的拍卖引发了欧洲乃至全球电信经济的萧条,但中国实行的“积极试验,谨慎决策”的政策,确保了电信业的快速增长。如2001年和2002年中国的电信业务收入分别增长了16.1%和14.4%,继续高于GDP的增长速度。今天,3G在国际市场上正步入良性发展轨道,中国移动通信市场也在向纵深发展,包括促进有效竞争、支持民族3G标准TD-SCDMA的发展和应用等。一、中国发展3G迫在眉睫1.用户需要3G中国市场对移动话音、移动新业务和新应用的需求潜力十分巨大。2002年底,中国移动通信的用户数(中国移动+中国…     

影响带锯机锯切质量的原因及处理措施

通过对锯切装置的改进，提高了锯切性能，降低了锯条成本，保证了锯切质量，使设备更加高效、安全的工作。     

大庆油田葡深1井射孔及测试

葡深1井完钻井深5500m，井温高达200℃以上，射孔、测试施工难度大。经过针对性的射孔测试设计和模拟试验，成功地完成了二层射孔及测试，射孔弹发射率100％，获取了合格的地层测试资料，为该地区下步深层勘探布署提供了科学依据。     

真空蒸发沉积VOPc薄膜及磁场对薄膜结构与性能的影响

用真空蒸发制备了酞菁氧钒 (VOPc)薄膜 ,并在磁场中进行了热处理。用X光电子能谱、X射线衍射、紫外 可见吸收光谱、原子力显微镜等手段对制备的薄膜进行了表征。结果表明沉积的酞菁氧钒薄膜为α 型 ,成分接近酞菁氧钒的分子式。制备的薄膜在磁场中进行了热处理 ,发现磁场使酞菁氧钒薄膜性质发生改变 :UV VIS吸收谱Q带发生红移 ;XRD谱图衍射峰强度明显增强 ,峰位略有变化 ;原子力显微镜 (AFM)分析发现晶粒大小无明显变化。以上结果说明磁场的存在使得VOPc分子在热处理过程中发生了定向的排列     

A Parallel Deadlock Detection Algorithm with O(1) Overall Run-time Complexity

This article proposes a novel parallel, hardware-oriented deadlock detection algorithm for multiprocessor system-on-chips. The proposed algorithm takes full advantage of hardware parallelism in computation and maintains information needed by deadlock detection through classifying all resource allocation events and performing class specific operations, which together make the overall run-time complexity of the new method O(1). We implement the proposed algorithm in Verilog HDL and demonstrate in the simulation that each algorithm invocation takes at most four clock cycles in hardware.     

A Newly Developed Non, Destructive Tritium Measurement Technique and Its Application to V-4Cr-4Ti Alloy

A non-destructive and in-situ technique for the measurement of tritium in materials, namely β-ray-induced X-ray spectrometry （BIXS）, has been developed recently. In the present study a V-4Cr-4Ti alloy was pre-heated at 1000℃ for 2 h to form a recrystallization structure before the tritium absorption experiments were conducted. Firstly the hydrogen isotope gas was charazterized by means of a quadrupole mass spectrometer （QMS） and a small-sized ionization chamber. Then hydrogen isotope absorption tests of V-4Cr-4Ti alloy were performed at 400 ℃ and the atomic concentration of hydrogen isotope in V-4Cr-4Ti alloy was estimated as 0.17% with a tritium content of approximately 2.5 ppm. Experimental results indicate that BIXS is a quite useful tool for quantitatively measuring the tritium content and tritium distribution in the surface layers of vanadium alloys and no strong trapping effects of tritium exist in the pre-heated V-4Cr-4Ti alloy.     

柴油抗蜡分散剂的工业应用

柴油抗蜡分散剂PDN -3 0 2 3应用试验表明 ,抗蜡分散剂能有效改变蜡结晶的形状及尺寸 ,抑制蜡结晶的生长 ,有助于蜡晶体在柴油中分布得更均匀。     

The oxidation of two ternary Ni-Cu-10 at.% Al alloys in 1 atm of pure O2 at 800-900 °C

The oxidation of the ternary alloys Ni-45Cu-10Al and Ni-30Cu-10Al has been studied at 800-900 °C under 1 atm O₂. The presence of 10 at.% Al reduces significantly the oxidation rate of the corresponding Cu-Ni alloys during the initial oxidation stages, even before the establishment of a complete Al₂O₃ layer. The weight of individual sample of the two ternary Ni-Cu-10Al alloys at 800 °C increases more rapidly than at 900 °C during the initial oxidation stage. As oxidation proceeds, the weight gain at 800 °C slows down to a degree that the total weight gain after 24 h oxidation at 800 °C is less than that at 900 °C. Due to a faster formation of the Al₂O₃ layer, which suppresses earlier the further oxidation of Cu and Ni, the external region of the scales grown on Ni-45Cu-10Al contain much less Cu and Ni oxides than those grown on Ni-30Cu-10Al. The transition from the internal oxidation to the selective external oxidation of the most reactive component Al in Ni-Cu-Al alloys is favored by higher values of the Al content, of temperature and of the Cu/Ni ratio.