腐植酸类液体肥料生产技术和产品质量中的几个问题

本文通过胶体化学基本原理和实验数据，对水剂型腐植酸类液体肥料的组分、性质、浓度、流动性、稳定性、抗絮凝性等若干技术和质量问题进行了探讨，并提出一些改进建议。     

Soap‐free emulsion copolymerization of perfluoroalkyl acrylates in the presence of a reactive surfactant

Soap‐free emulsion copolymerization of perfluoroalkyl acrylate (FA)/methyl methacrylate (MMA)/n‐butyl acrylate (n‐BA) was carried out in the presence of sodium 2‐acrylamide‐2‐methyl propanesulfonate (AMPSNa) as a reactive surfactant and potassium persulfate (KPS) as an initiator. An analysis of the effects of concentration of AMPSNa, KPS, FA as well as polymerization temperature on the kinetic features (rate of polymerization) and colloidal characteristics (mean particle diameter, particle disperse index, particle numbers, and surface charge density) was followed. NMR, FTIR, AFM, and fluorine‐selective electrode analysis were used to characterize the composition and morphology of the FA copolymers. Both AFM analysis and contact angle measurements strongly implied that the fluorinated segments migrated to the outmost surface and created films with lower surface energy. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 2438–2444, 2007     

Consolidation of sand formation using freon'll gas hydrate

Freon 11 gas hydrate was used to block the pores of four size ranges of sand from 24 mesh to 60 mesh. A 50.8 mm deep bed of sand when thus “frozen” with hydrate could sustain a dfferential water pressure of at least 6895 kPa. A subcooling of about 5 to 6°C below its thermodynamic formation temperature was required to cause the hydrate to form such a plug. Once formed, the hydrate remained stable at temperatures up to its decomposition temperature. The time required for the hydrate crystal to grow to a size large enough to block the pores of the bed was about two hours. The amount of hydrate forming agent required to block the sand pores was found to be approximately that calculated from the ideal composition of the hydrate.     

Phase Assemblages of Pr α-sialon Derived from SHS-ed Powders and TEM Study on the Nucleation of Pr α-sialon

The Pr α-sialon powders prepared by self-propagating high-temperature synthesis (SHS), consisting of 55 wt% Pr α-sialon and 45 wt% of β-sialon (abbreviated as α' and β'), were hot-pressed at 1800°C for 1 h. The results showed that Pr α' phase would transfer to β' with the appearance of JEM phase (Pr(Si_{6− z} Al _z )(N_{10− z} O _z )) after sintering, thus resulting in the increase of β' phase to 86 wt%. The addition of Y₂O₃ into SHS-ed Pr α' powders as the starting materials restrains the transformation of α' to β' and prevents the formation of JEM phase as well. The nucleation mechanism of Pr α' grain during hot-pressing was investigated in terms of transmission electron microscope and energy-dispersive spectrometer analysis. Two nucleation modes of Pr α' grains were found, i.e., nucleating on the undissolved Pr α' grains and on the nuclei of (Pr, Y) α' grains precipitated from liquid phase.     

Synthesis of carbon nanocapsules containing Fe, Ni or Co by arc discharge in aqueous solution

A simple, inexpensive and one-step synthesis method of metal-containing carbon nanocapsules using an arc discharge in aqueous solution is reported. It was found that Ni, Co and Fe nanoparticles could be in situ encapsulated in carbon shells when the arc was performed respectively in aqueous solutions of NiSO₄, CoSO₄ and FeSO₄. Transmission electron microscopy, energy dispersive X-ray spectroscopy and electron diffraction patterns of selected areas were used to determine the crystalline phase of the metal cores. To explain the formation mechanism of metal-containing carbon nanocapsules, a model of discharge in solution is proposed. This result presents a simply controllable way to synthesize metal-containing carbon nanocapsules.     

Integrated size and topology optimization of skeletal structures with exact frequency constraints

The present paper studies the integrated size and topology optimization of skeletal structures under natural frequency constraints. It is found that, unlike the conventional compliance-oriented topology optimization problems, the considered problem may be strongly singular in the sense that the corresponding feasible domain may be disconnected and the global optimal solutions are often located at the tips of some separated low dimensional sub-domains when the cross-sectional areas of the structural components are used as design variables. As in the case of stress-constrained topology optimization, this unpleasant behavior may prevent the gradient-based numerical optimization algorithms from finding the true optimal topologies. To overcome the difficulties posed by the strongly singular optima, some particular forms of area/moment of inertia-density interpolation schemes, which can restore the connectedness of the feasible domain, are proposed. Based on the proposed optimization model, the probability of finding the strongly singular optimum with gradient-based algorithms can be increased. Numerical examples demonstrate the effectiveness of the proposed approach.     

Thermal and crystallization characteristics of poly(ethylene terephthalate) with poly(oxybenzoate‐p‐trimethylene terephthalate) copolymer

Poly(ethylene terephthalate) (PET) was blended with two different poly(oxybenzoate‐p‐trimethylene terephthalate) copolymers, designated T28 and T64, with the level of copolymer varying from 1 to 15 wt %. All samples were prepared by solution blending in a 60/40 (by weight) phenol/tetrachloroethane solvent at 50°C. The crystallization behavior of the samples was studied by DSC. The results indicate that both T28 and T64 accelerated the crystallization rate of PET in a manner similar to that of a nucleating agent. The acceleration of PET crystallization rate was most pronounced in the PET/T64 blends with a maximum level at 5 wt % of T64. The melting temperatures for the blends are comparable to that of pure PET. The observed changes in crystallization behavior are explained by the effect of the physical state of the copolyester during PET crystallization as well as the amount of copolymer in the blends. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 1599–1606, 2002     

江苏省泗洪县湿地公园雕塑创作浅析

江苏省泗洪县有着悠久的历史底蕴和深厚的文化背景,泗洪湿地公园是国家级湿地保护区.笔者受当地县政府委托在湿地公园入口处设计制作一幅大型浮雕壁画,前景是两尊立体的2.8米圆雕人物,照壁30米长,2.8米高,记载历史故事和民俗风情.以当地的泗洪湿地的特色飞禽白鹭贯穿始终,将不同时期的人物与景观自然地连贯穿插.并以文武两位名士的圆雕塑像为主要历史文脉,提升湿地公园的历史和人文内涵.湿地公园的雕塑寓意深刻、内涵丰富、品味高雅.雕塑紧扣泗洪县当地的自然环境和历史文化,为泗洪湿地公园增添了风采和神韵.     

MC(Mid-Century)催化氧化过程的研究进展

介绍了MC催化氧化过程规律；从催化荆体系的改进、新型溶剂体系的开发、反应器构型和配套设施的改进、富氧氧化技术的开发等方面综述了近年来MC技术的发展；探讨了MC液相催化氧化技术应用范围的拓展以及MC液相催化氧化过程的发展方向。     

Crystallization behavior,mechanical properties,and environmental biodegradability of poly(β‐hydroxybutyrate)/cellulose acetate butyrate blends

The miscibility, crystallization behavior, tensile properties, and environmental biodegradability of poly(β‐hydroxybutyrate) (PHB)/cellulose acetate butyrate (CAB) blends were studied with differential scanning calorimetry, scanning electron microscopy, wide‐angle X‐ray diffraction, and polarizing optical microscopy. The results indicated that PHB and CAB were miscible in the melt state. With an increase in the CAB content, the degree of crystallinity and melting temperature of the PHB phase decreased, and this broadened the narrow processability window of PHB. As the elongation at break increased from 2.2 to 7.3%, the toughness and ductility of PHB improved. From the degradation test, it could be concluded that degradation occurred gradually from the surface to the inside and that the degradation rate could be adjusted by the addition of the CAB content. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 2116–2122, 2003